> Click here to return to the Construction Equipment Guide homepage.    This site can also be read in  
|
|
|
|
|
|
|
 
Touch for Navigation


Bobcat Adds Rebar Bender Attachment

The rebar bender comes with five mandrels that provide the ability to bend rebar into a variety of angles and repeat bends for added efficiency and consistency.

The rebar bender comes with five mandrels that provide the ability to bend rebar into a variety of angles and repeat bends for added efficiency and consistency.

Bobcat Company has added a rebar bender attachment to its line up.

Mounted on the left Bob-Tach mount, the rebar bender comes with five mandrels that provide the ability to bend rebar into a variety of angles and repeat bends for added efficiency and consistency. It offers the ability to bring the equipment right on the job site when conditions are soft, rough or muddy.

Rebar up to a number 6 grade can be bent up to 200 degrees, and the remote attachment control (RAC) allows for easy, safe operation of the rebar bender from outside the cab, and allows operators to start and stop their idled loader or Toolcat utility work machine from outside the cab. The wired remote control starts and stops the rotation of the bend pin.

An optional bar stop is available that can be set at almost any angle for an automatic stop and a repeatable angle setting.

Compatible machines for the rebar attachment include all Bobcat skid-steer loaders, compact track loaders, all-wheel steer loaders and Toolcat utility work machines.

The Bobcat rebar bender has a height of 20.1 in. (51 cm), width of 23.5 in. (59 cm), depth of 16.7 in. (42.4 cm) and weight of 330 lbs. (149 kg). It has a maximum hydraulic flow of 24 gpm (91 L).

For more information, visit www.bobcat.com.