Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Thu July 07, 2011 - National Edition
For more than 27 years, Flexco has been solving transfer point challenges with the Tasman Warajay Technology. These systems not only improve throughput, but also reduce excessive dust, spillage, plugging, downtime, belt wear and combustion dangers, according to the manfuacturer.
Flexco specializes in assessing transfer point needs, modeling data to accurately predict material trajectories and designing solutions that will accommodate future fluctuations in load volume. Flexco uses Tasman Warajay Technology to develop custom solutions for material handling operations.
Each material transfer system from Flexco is designed to control the flow of material by keeping material in a continuous stream throughout the transfer. The geometry of the system is designed to accurately control the velocity and direction of the material stream contained within it, so the material stream stays together with all fines and particulates entrained in the stream.
Material discharged from the system is deposited softly and uniformly at a predetermined velocity and direction on the receiving belt so material settles on the receiving conveyor rapidly and without the turbulence that typically leads to spillage and dust generation.
For more information, call 1-815-609-7025 or visit www.flexco.com.