Big & Small — Taylor's Rental Equipment Has Them All

📅   Mon February 06, 2017 - West Edition


This model 65XP Bandit chipper is a popular choice for customers of Taylor’s Rental in Fort Worth, Texas.
This model 65XP Bandit chipper is a popular choice for customers of Taylor’s Rental in Fort Worth, Texas.

Ed Wadley, owner of Taylor's Rental Equipment Co. thinks big.

“When Hurricane Sandy hit the East Coast I had stump grinders up in New Jersey for about three months each,” he said matter-of-factly, as if it's normal for a modest rental company to send equipment 1, 200 mi. (1,931.2 km) away.

Truth is, for storms like Sandy, it's not uncommon for rental companies to have such long-distance deals. But again, Ed thinks big and that's certainly helped Taylor's Rental stand out among its competition. Whereas most rental shops carry smaller brush chippers and stump grinders, Ed's fleet runs the table for Bandit hand-fed chippers. He has the smaller rental favorites like the 65XP, 75XP, 90XP and a few 250XPs, but he also rents 1390s, 1590s, 1890s, and the largest hand-fed Bandit chipper you can get — a 21-in. (53.34 cm) capacity 1990XP.

“I have one unique customer that works on cooling towers at a power plant, and when they service those, there are wood parts that need replaced,” said Wadley. “If you haul them in a truck, you have truckload after truckload. They found they can run them through a big chipper and cut those loads down 20 to 1, which obviously saves a lot in transportation costs. They prompted me to get the 1990XP; I bought it and Bandit actually delivered it to them in South Carolina on a power plant job. It was there for the first two months of its life.”

Okay, so if you're keeping track, this Texas-based rental company sends stump grinders to New Jersey and chippers to South Carolina. That's not a bad spread by any stretch — with that kind of customer support and willingness to go big, it's no wonder the company has been in business since 1953. And, according to the company, business is booming; Taylor's Rental employs 80 and uses 50,000 sq. ft. (15,240 sq m) of space to serve its customers. And while there are some truly long-distance rentals as previously mentioned, Ed said the vast majority of their clientele are in the north Texas region, Louisiana, Arkansas and southern Oklahoma. Still, that's four states.

Serving such a large territory can be daunting for any rental organization. Helping Ed and his team at Taylor's Rental is Bandit's nearby dealer, Bandit of Texas. The relationship between Taylor's Rental and Bandit of Texas spans years, going back to when the dealership was known as Poston Equipment. With more than two decades of service to Bandit customers in the region, Bandit of Texas provides an excellent support base for Ed and his large Bandit fleet, according to the company.

“It all started years ago, carrying higher horsepower stump grinders and chippers,” said Wadley. “I'm a tool guy from way back and a little more horsepower is always nice. And we have a really good group of clients in the tree business. I rent higher-horsepower stump grinders than anyone else; I carry model 2550s with 44 horsepower and model 2650s with 61 horsepower. Nobody else in my market will do that. It's a certain mentality that you have to get used to and develop a clientele for the bigger equipment. It's a market that's worked well for us.”

Ed said the larger chippers and stump grinders are rented mostly to tree companies, and to a smaller extent, landscaping companies. He estimates around a dozen regular customers for the bigger equipment, including the aforementioned client who uses the model 1990XP. As expected, the smaller Bandits typically see homeowner use.

“I've been renting Bandits for about 10 years now,” said Wadley. “You could walk in here any day of the week and I'd have two or three of the chippers out, and the stump grinders go out more often than the chippers.

Regardless of the size, they've been good investments for Taylor's Rental.

I'll keep the small chippers for about three years,” he said. “The larger machines it really depends on the number of hours; I usually keep them longer. My initial cost recovery is 24 months, but that's more towards the bigger chippers. On a 6-in. chipper like the model 65XP I can do it in 18 months at the most.”

Equipment maintenance is something that Ed stresses as vital to being successful in the rental business, but it's especially true with chippers. That can be frustrating to some who prefer 'hands-off' operations, but Ed also points out that return on investment can be much more lucrative with chippers.

“Compared to a backhoe or something like that, there's a lot more maintenance with a chipper,” said Wadley. “But if you want to take a comparison, I get $400 per day on an 18-in. chipper that cost $60,000. To get the same kind of return I'd need a piece of equipment costing twice as much, so my initial investment is about half for the same return. That also means I can spend more time on it and more maintenance because I'm getting a better return for it.”

As successful as Taylor's Rental is with their fleet of Bandits, diversification is the major factor in the company's success. In addition to a very wide range of tool and construction equipment, Taylor's Rental also maintains a special events portion that can turn any backyard into a five-star entertainment venue, complete with tents, dance floors, stages, audio equipment and even a dunk tank for splashing the boss during the company picnic.

“Basically we have two companies here,” explained Wadley. “We have our special events side and we have our tool business, and both pretty extensive. On the tool side we have everything from homeowner's equipment to big boom trucks, crawlers, backhoes, generators — really a full gamut of construction equipment. And we're pretty well divided out between them; total revenue is half from construction, half from special events. It's a good mix.”

At this point it would be very easy to bring up the classic cliché of not putting all your eggs in one basket. That certainly holds true, but talking with Ed it becomes clear that the success of Taylor's Rental isn't about diversification, or customer service, or thinking big. It's a combination of all three, infused with a certain level of modesty that keeps companies in-check. Each day starts with customers walking through the door — get them what they need. If you don't have it, consider getting it. When customers started asking for bigger chippers, Ed took an extra step to make that happen. And the payoff has been worth it.

For rental companies considering taking on a line of rental machines, Ed offers this simple advice:

“Get used to the fact that you'll need to maintain them properly, and train your customers to use them,” he said. “If you're willing to do that, you can do very well with them. And I like Bandit chippers, so I'd be sure to give them Bandit's number.”

For more information, visit taylors.rentals.com and banditchippers.com.