Bomag’s BTM 05 Terrameter compaction control and documentation system measures, controls and records the compaction process and its development, leading to significantly increased compaction quality.

The system is ideal for proof rolling of subgrade and identification of weak spots in highway, railway track, airport, dam, landfill and embankment construction. The Terrameter overcomes the shortcomings of conventional test methods by continually measuring stiffness, settlement, deformation and load-bearing capacity of soil and granular materials, eliminating the risk of under- or over-compacting.

Through the indication of Omega values, the Terrameter provides assurance of uniform compaction quality without the delay of laboratory testing. Because conventional test methods are applied at sample points, they only provide partial control. By assessing the entire area, the Terrameter reduces the risk of under- and over-compacting.

As the Terrameter passes across the ground, the measuring system continually produces an Omega value, a measurement of compaction quality. The Terrameter monitors interaction between the acceleration of the vibrating drum and the dynamic stiffness of the material, which increases as compaction progresses. Depending on the material type, Omega values between zero and 1,000 will be indicated. The higher the Omega value (relative to material type), the better the compaction.

During each measuring pass, the Terrameter calculates the average Omega value and compares it with previous passes. An indicator on the instrument panel displays the average Omega value, while an on-board printer prints data on request and provides a continuous record of all Omega values for the entire compacted area. The printout can display the compaction results as an ongoing curve or in 5-meter (16.4 ft.) sections. Poorly compacted spots, represented by low Omega values, can be identified and located on the printout, and may then be further compacted.

A green indicator light on the control panel indicates the roller is compacting effectively. If the required Omega value is achieved before the green light goes out, the operator may finish compacting the area and print the results. If the average Omega value increasing between two passes is minimal, the green light will go out, signifying that maximum economic compaction has been attained.

The analog instrument console, located within easy reach of the operator, indicates the current travel speed and actual frequency. An electronic unit, located under the operator’s seat, stores and processes the acceleration values picked up by the transducer unit.

The Terrameter can be field or factory installed to all models of the Bomag BW213-3 series units, as well as the Bomag BW219DH-3 model.

For more information, call 309/853-3571 or visit www.bomag-americas.com.

Today's top stories

Growing Interest in Construction Careers Among Younger People Means Jobs Filled, Deadlines Met

Larry Young Paving Tackles Grade-Separated Interchange in Texas

Caltrans, Crews Working to Repair Highway Landslides

FIRSTGREEN Industries Launches ROCKEAT Electric Skid Steer Loader

'Tiltrotator Effect' Increases as Energy Consumption Goes Down

VIDEO: Birmingham, Ala., Awarded $14.5M Fed Grant to Revitalize Its 'Black Main Street'

Pettibone Celebrates 75th Anniversary of Cary-Lift

Fay Preps Way for Pittsburgh International Airport Modernization Project