All Equipment Category Specs ↠ Off-Highway Trucks ↠ Caterpillar 730C EJ

Caterpillar 730C EJ Off-Highway Truck

Category: Off-Highway Trucks (See all Off-Highway Trucks for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 730C EJ (See all Caterpillar 730C EJ for sale)

Body Capacities

Heaped (SAE 2:1)	22 cu yd (17 cu m)
Struck	18 cu yd (14 cu m)

Body Plate

Body Plate Type

High Strength Brinell HB450 Wear Resistant Steel

Dump

Capacity - Heaped	22 cu yd (17 cu m)
Capacity - Struck	18 cu yd (14 cu m)
Rated Payload	62,000 lbs (28,123 kg)

Ejector Cycle Times

Eject Time	12 seconds
Retract Time	15 seconds

Engine

Bore	5 in (13 cm)
Displacement	763 cu in (12,503 cu cm)
Engine Model	Cat C13 ACERT
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV	Cat C13 ACERT
Gross Power	375 hp (280 kw)
Gross Power - SAE J1995	375 hp (280 kw)
Max Torque	1,165 lbs ft (1,579 nm)
Net Power	367 hp (274 kw)
Net Power - ISO 14396	370 hp (276 kw)
Net Power - SAE J1349	367 hp (274 kw)
No Engine De-rating Required Below	12,500 ft (3,810 m)
Peak Engine Torque Gross (SAE J1995)	1,579 lbs ft (2,141 nm)
Peak Engine Torque Net (ISO 14396)	1,564 lbs ft (2,120 nm)
Peak Engine Torque Speed	1200 rpm
Stroke	6 in (16 cm)
Torque Measured @	1200 rpm

Operating Specifications

Cooling System Fluid Capacity	22 gal (83 l)
Fuel Capacity	109 gal (412 l)
Hydraulic System Fluid Capacity	29 gal (110 l)
Transmission Fluid Capacity	9 gal (35 l)

Operating Weights

Center Axle - Empty	12,500 lbs (5,670 kg)
Center Axle - Loaded	42,758 lbs (19,395 kg)
Center Axle - Rated Load	30,258 lbs (13,725 kg)
Front Axle - Empty	34,811 lbs (15,790 kg)
Front Axle - Loaded	36,289 lbs (16,460 kg)
Front Axle - Rated Load	1,478 lbs (670 kg)
Rear Axle - Empty	11,773 lbs (5,340 kg)
Rear Axle - Loaded	42,031 lbs (19,065 kg)
Rear Axle - Rated Load	30,258 lbs (13,725 kg)
Total - Empty	59,084 lbs (26,800 kg)
Total - Loaded	121,078 lbs (54,920 kg)
Total - Rated Load	61,994 lbs (28,120 kg)

Service Refill Capacities

Cooling System	22 gal (83 l)
DEF Tank (ISO 2224-1)	5 gal (20 l)
Engine Crankcase	11 gal (40 l)
Final Drives/Differential	36 gal (135 l)
Fuel Tank	109 gal (412 l)
Hydraulic System	29 gal (110 l)
Output Transfer Gear Box	6 gal (24 l)
Transmission	9 gal (35 l)

Sound Levels

Interior Cab

76 dB(A)

Standards

Brakes	ISO 3450 - 2011
Cab - FOPS	ISO 3449 Level II - 2005
Cab - ROPS	ISO 3471 - 2008
Steering	ISO 5010 - 2007

Steering System

Lock to Lock

4.75 seconds @ 60 rpm

Transmission

Forward - 1	5 mph (8 kph)
Forward - 2	9 mph (14 kph)
Forward - 3	14 mph (23 kph)
Forward - 4	21 mph (34 kph)
Forward - 5	29 mph (47 kph)
Forward - 6	34 mph (55 kph)
Number of Forward Gears	6
Number of Reverse Gears	1
Reverse - 1	6 mph (10 kph)

Turning Circle

Turning Dimensions - Aisle Width	214 in (544 cm)
Turning Dimensions - Clearance Radius	318 in (808 cm)
Turning Dimensions - Inside Radius	148 in (376 cm)
Turning Dimensions - SAE Turning Radius	294 in (747 cm)
Turning Dimensions - Steer Angle - Left/Right	45 degrees

Weights

Center Axle - empty	12,500 lbs (5,670 kg)
Center Axle - loaded	42,758 lbs (19,395 kg)
Front Axle - empty	34,811 lbs (15,790 kg)
Front Axle - loaded	36,289 lbs (16,460 kg)
Rear Axle - empty	11,773 lbs (5,340 kg)
Rear Axle - loaded	42,031 lbs (19,065 kg)
Total Empty	59,084 lbs (26,800 kg)
Total Loaded	61,994 lbs (28,120 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon