Mini-Loader Extension Mount Delivers Auger Drive Performance With Ability to Reach Tough Areas

Unique design capabilities coupled with practical field experience drove the introduction of Digga’s new Mini-Loader Extension Mounts.

📅   Wed August 03, 2016 - National Edition


The new mini-loader extensions are designed to accommodate the Digga DSS Series of compact high-torque planetary-drives, with a sleek compact design that ensures that the drive can fit into a 10-in. (25.4 cm) diameter hole, providing deeper penetration without the need for additional extensions for more efficient operation.
The new mini-loader extensions are designed to accommodate the Digga DSS Series of compact high-torque planetary-drives, with a sleek compact design that ensures that the drive can fit into a 10-in. (25.4 cm) diameter hole, providing deeper penetration without the need for additional extensions for more efficient operation.

Unique design capabilities coupled with practical field experience drove the introduction of Digga's new Mini-Loader Extension Mounts. Designed to provide maximum machine reach into tough-to-reach areas, the new extensions, manufactured by Iowa-based Digga North America, allow mini-loaders to carry the full line of powerful planetary-drive DSS Series on their compact equipment. The extra boom length allows the operator to gain an additional reach of up to 2 ft. (.6 m) depending on the application. The mini-loader extensions will decrease the need for additional auger extensions and accommodate longer 4-ft. (1.2 m) auger bits while also adding a unique cradle positioned for stability while transporting the drive on site, according to the manufacturer.

The new mini-loader extensions are designed to accommodate the Digga DSS Series of compact high-torque planetary-drives, with a sleek compact design that ensures that the drive can fit into a 10-in. (25.4 cm) diameter hole, providing deeper penetration without the need for additional extensions for more efficient operation. In addition, the DSS Series includes a two-piece shaft design that isolates the planetary gears from the pushing, pulling and bending forces without increasing the load on the bearings. With a high shaft pull-out rating and an output shaft that can be replaced without disassembly of the planetary gearbox, the DSS Series will experience less machine downtime than other models, according to the manufacturer.

All Digga DSS Auger Drives are covered by warranty protection that includes a 5-year warranty on the planetary gearbox, a 3-year warranty on the hydraulic motor, with lifetime shaft pull-out warranty for extra protection.

For more information, call 563/875-7915 or visit www.diggausa.com.