Featuring a centrally mounted cutting drum that allows precise milling near walls, curbs and other obstructions, Bomag's BM1200/30-2 cold planer milling machine is ideally suited for shoulder repair, utility and general surface milling applications.
The BM1200/30-2 offers a standard cutting width of 47.2 in. (120 cm) Powered by a 275-hp (205 kW) Caterpillar diesel engine, the machine offers a high horsepower-per-cutting-tooth delivery ratio for maximum efficiency and productivity. Additionally, the direct mechanical drive design of the cutting drum provides maximum power transfer while reducing any external losses. The unit is capable of milling depths up to 12.6 in. (32 cm).
The BM1200/30-2's centrally mounted cutting drum eliminates the need to move the right rear track away from the cut line, providing the machine with improved overall balance. Compared with other units, the BM1200/30-2's cutting drum makes it possible to use a much shorter take-off belt, resulting in lower maintenance costs and more uptime, according to the manufacturer.
Featuring a centrally located “over-the-cut” operator's position, the BM1200/30-2 offers increased job site visibility. Furthermore, the operator's seat can slide out over the right edge of the machine, offering added visibility of the cutting drum's leading edge and the line or curb to be followed during the cut. User-friendly controls make the mill easy to operate either via the operator's station or from ground level with remote-mount controls.