| Air Conditioning System |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
| Cab |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
| Dimensions |
| Bucket Pin Height - Carry Position | 7.1 in ( 18 cm ) |
| Bucket Pin Height - Maximum Lift | 10.6 ft ( 3 m ) |
| Bucket Pin Reach - Maximum Lift | 19.4 in ( 49 cm ) |
| Clearance at Maximum Lift and Dump | 94.5 in ( 240 cm ) |
| Departure Angle | 33 deg |
| Ground Clearance | 0.8 ft ( 0 m ) |
| Height - Top of Cab | 7.0 ft ( 2 m ) |
| Length - Track on Ground | 69.6 in ( 177 cm ) |
| Length - With Bucket on Ground | 154.7 in ( 393 cm ) |
| Length - Without Bucket | 125.5 in ( 319 cm ) |
| Maximum Dump Angle | 54 deg |
| Maximum Overall Height | 158.7 in ( 403 cm ) |
| Maximum Reach - With Arms Parallel to Ground | 51.9 in ( 132 cm ) |
| Overall Length - Track | 89.4 in ( 227 cm ) |
| Rack Back Angle - Maximum Height | 81 deg |
| Reach - Maximum Lift/Dump | 33.6 in ( 85 cm ) |
| Roll Back Angle | 25 deg |
| Turning Radius from Center - Bucket (racked) | 91.1 in ( 231 cm ) |
| Turning Radius from Center - Coupler | 58.1 in ( 148 cm ) |
| Turning Radius from Center - Machine Rear | 74.0 in ( 188 cm ) |
| Vehicle Width (400 mm/15.7 in tracks) | 76.0 in ( 193 cm ) |
| Vehicle Width (450 mm/17.7 in tracks) | 78.0 in ( 198 cm ) |
| Engine |
| Bore | 3.9 in ( 10 cm ) |
| Displacement | 232.0 cu in |
| Engine Model | Cat C3.8 DIT (turbo) |
| Gross Power | 95.0 hp ( 71 kw ) |
| Gross Power - SAE J1995 | 98.0 hp ( 73 kw ) |
| Net Power | 95.0 hp ( 71 kw ) |
| Net Power - ISO 9249 | 95.0 hp ( 71 kw ) |
| Net Power - SAE 1349 | 95.0 hp ( 71 kw ) |
| Peak Torque - 1,500 rpm - SAE J1995 | 246.0 ft ( 75 m ) |
| Stroke | 4.7 in ( 12 cm ) |
| Hydraulic System |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 76.0 hp ( 57 kw ) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 32.0 gpm ( 121 lpm ) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4,061.0 psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 44.0 hp ( 33 kw ) |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23.0 gpm ( 87 lpm ) |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3,335.0 psi |
| Loader |
| Operating Load Rating | 4,600.0 lbs ( 2,087 kg ) |
| Operating Width | 76.0 in ( 193 cm ) |
| Noise Level |
| Inside Cab* | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 104 dB(A) |
| Operating Specifications |
| Breakout Force - Lift Cylinder | 6,162.0 lbs ( 2,795 kg ) |
| Breakout Force - Tilt Cylinder | 7,270.0 lbs ( 3,298 kg ) |
| Ground Contact Area - With 400 mm/15.7 in Track | 2,184.0 cu in ( 0 cu m ) |
| Ground Contact Area - With 450 mm/17.7 in Track | 2,463.0 cu in ( 0 cu m ) |
| Ground Pressure - With 400 mm/15.7 in Track | 5.2 psi |
| Ground Pressure - With 450 mm/17.7 in Track | 4.6 psi |
| Rated Operating Capacities - 35% Tipping Load | 3,200.0 lbs ( 1,452 kg ) |
| Rated Operating Capacities - 50% Tipping Load | 4,600.0 lbs ( 2,087 kg ) |
| Rated Operating Capacity with Optional Counterweight | 4,860.0 lbs ( 2,204 kg ) |
| Tipping Load | 9,200.0 lbs ( 4,173 kg ) |
| Power Train |
| Travel Speed - Forward or Reverse - One Speed | 5.2 mph ( 8 kph ) |
| Travel Speed - Forward or Reverse - Two Speed | 8.4 mph ( 14 kph ) |
| Service Refill Capacities |
| Cooling System | 4.1 gal ( 16 l ) |
| Diesel Exhaust Fluid (DEF) Tank | 5.0 gal ( 19 l ) |
| Engine Crankcase | 3.5 gal ( 13 l ) |
| Fuel Tank | 32.2 gal ( 122 l ) |
| Hydraulic System | 14.5 gal ( 55 l ) |
| Hydraulic Tank | 10.3 gal ( 39 l ) |
