Equipment ↠ Caterpillar ↠ Crawler Dozers ↠ THIS Caterpillar D6R XL

Caterpillar D6R XL For Sale in Aurora, CO

Name: Caterpillar D6R XL
Brand: Caterpillar
Price: 116000 USD
Availability: InStock

❮

❯

For Sale: $116,000.00 USD

Apply for Financing

Wagner Equipment Co.

Wagner Equipment Co. Dealer Info

Wagner Equipment Co. Website

Click here to email Wagner Equipment Co..

Contact: Equipment Manager

Click for Phone Number

Machine Info:

Hours:	7406
Serial Number:	5LN02493
Machine Location:	AURORA, CO
More Information:	https://catused.com/cu/10084437

Description:

1000?/09/19/23, 2-12V, 750CCA BATTERIES,100AH, 2000 CATERPILLAR D6R XL DOZER, Air Conditioner, AM-FM RADIO,STD, BLOWER FAN,, ANALOG INSTRUMENT DISPLAY W/EMS, AS IS / AS RECEIVED, BLADE,SEMI-U,123" WIDE, 7.34 YD3, CAB, ROPS, HEAT, DEF,, CYLINDER, LIFT WITH LINES - LH, CYLINDER, LIFT WITH LINES - RH, DIFFERENTIAL STEERING,, DRAWBAR, RIGID SHORT, ENCLOSURE, ENGINE, ENGINE,3306, 175HP, TIER 1, FRT PULL DEVICE, REARVIEW MIRROR, GUARD, FUEL TANK, GUARD, RADIATOR,HINGED, HD, GUARD, REAR TRACTOR, JOYSTICK,W/FINGER TIP CONTROL, LIGHTING,HALOGEN, WORK (4), LOAD SENSING HYDRAULICS 51 GPM, MOUNTING, CYLINDER, Online Owner's Manual , RADIATOR, HIGH AMBIENT, SEAT,AIR RIDE VINYL, W/3" BELT, SINGLE TILT, SINGLE SHANK RIPPER, TC,TD,RETARDER, TRACK, 22" SG, TRANSMISSION,PWR SF F3-R3, TRAVEL ALARM,FLOOR MAT,HEADLINER

Machine Details:

GENERAL APPEARANCE
Cleaning Required	Yes
SAFETY ITEMS
ROPS	Yes
ROPS Certification Plate	Yes
GAUGES, OPERATOR STATION, CONSOLE
ROPS Certification Plate	Window slides and latches worn, door inner cover broken
ENGINE
Blow By	No
Compression in Radiator	No
Fluid Levels OK?	No
Knocking	No
Oil Leaks	Yes
Water in Oil	No
COOLING SYSTEM
Leaks - COOLING SYSTEM	Yes
ELECTRICAL, STARTING AND CHARGING SYSTEM
Alternator	Fair
Batteries / Cables	Good
Starter	Good
Wiring	Fair
TRANSMISSION
Leaks - TRANSMISSION	Yes
Transmission - Noisy	No
STEERING
Differential Steer	Fair
Differential Steering Controls	Fair
Steering Linkage	Fair
Steering Operating Condition	Fair
HYDRAULICS
Leaks - HYDRAULICS	Yes
BLADE
Cutting Edge & Bits	Fair
Face / Moldboard	Fair
Pins	Fair
Push Arm	Fair
Tilt Arms	Poor
Trunnions	Fair
RIPPER / GRAPPLE / WINCH
Leaks - HYDRAULICS	Ripper not operational, hand lever not operational, center shank holder side cracks,
UNDERCARRIAGE
Leaks - HYDRAULICS	Fair condition undercarriage, but ls. Carrier roller broken, oil leaks, left side #1 track roller bearing failure
Leaks - HYDRAULICS	Left side damage, oil leaks, itr non cat
Leaks - HYDRAULICS	Poor condition worn
Leaks - HYDRAULICS	Non cat links, idlers, carrier rollers, shoes, sprockets
Leaks - HYDRAULICS	Estimate wear non cat undercarriage
Leaks - HYDRAULICS	Fair condition
Leaks - HYDRAULICS	Track roller frames mountings cracked
Leaks - HYDRAULICS	Fair condition itr non cat
FINAL DRIVES
Housings, Left	Good
Housings, Right	Good
Planetaries / Differential, Left	Good
Planetaries / Differential, Right	Good
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Leaks - HYDRAULICS	Starts and runs, ripper assembly not operational, lever linkage need attention

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Dimensions
Ground Clearance	1.3 ft ( 0 m )
Height - Top of Cab	10.5 ft ( 3 m )
Length of Track on Ground	9.3 ft ( 3 m )
Length w/ Blade	17.5 ft ( 5 m )
Length w/o Blade	12.7 ft ( 4 m )
Width Over Tracks	8.1 ft ( 2 m )
Engine
Aspiration	Turbocharged
Displacement	640.8 cu in ( 10,501 cu cm )
Engine Model	3306 T
Flywheel Power	175.0 hp ( 131 kw )
Gross Power	189.0 hp ( 141 kw )
Maximum Flywheel Power	189.0 hp ( 141 kw )
Net Power	175.0 hp ( 131 kw )
Number of Cylinders	6.0
Power Measured @	1,900.0 rpm
Hydraulic System
Pump Flow Capacity	50.2 gpm ( 190 lpm )
Pump type	Piston
Relief Valve Pressure	2,800.0 psi
Operating Specifications
Alternator Supplied Amperage	70 amps
Cooling System Fluid Capacity	19.6 gal ( 74 l )
Engine Oil Capacity	7.3 gal ( 28 l )
Final Drives Fluid Capacity	3.6 gal ( 14 l )
Fuel Capacity	101.2 gal ( 383 l )
Hydraulic Fluid Capacity	20.1 gal ( 76 l )
Operating Voltage	24.0 volts
Operating Weight	41,900.0 lbs ( 19,006 kg )
Ripper
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	20.2 in ( 51 cm )
Maximum Penetration	19.7 in ( 50 cm )
Number of Pockets	3.0
Overall Beam Width	86.7 in ( 220 cm )
Ripper Type	Parallelogram
Service Refill Capacities
Cooling System	19.6 gal ( 74 l )
Engine Crankcase	7.4 gal ( 28 l )
Final Drive - Each	3.7 gal ( 14 l )
Fuel Tank	101.2 gal ( 383 l )
Hydraulic Tank	20.1 gal ( 76 l )
Power Train	41.0 gal ( 155 l )
Standard Blade
Capacity	7.4 cu yd ( 6 cu m )
Height	55.6 in ( 141 cm )
Width	10.7 ft ( 3 m )
Transmission
1 Forward	2.5 mph ( 4 kph )
1 Reverse	3.0 mph ( 5 kph )
2 Forward	4.3 mph ( 7 kph )
2 Reverse	5.3 mph ( 9 kph )
3 Forward	7.0 mph ( 11 kph )
3 Reverse	9.2 mph ( 15 kph )
Max Speed - Forward	7.4 mph ( 12 kph )
Max Speed - Reverse	9.5 mph ( 15 kph )
Number of Forward Gears	3.0
Number of Reverse Gears	3.0
Transmission Type	Power Shift
Undercarriage
Ground Clearance	1.3 ft ( 0 m )
Ground Contact Area	4,888.0 cu in ( 80,100 cu cm )
Ground Pressure	8.6 psi
Number of Shoes per Side	41.0
Number of Track Rollers per Side	7.0
Standard Shoe Size	22.1 in ( 56 cm )
Track Gauge	6.2 ft ( 2 m )
Track Pitch	8.0 in ( 20 cm )
Winch
Drum Diameter	10.3 in ( 26 cm )
Drum Width	10.0 in ( 25 cm )
Flange Diameter	13.0 in ( 33 cm )
Increased Tractor Length - STD	20.4 in ( 52 cm )
Oil Capacity	17.7 gal ( 67 l )
Weight	2,502.3 lbs ( 1,135 kg )
Winch and Bracket Length	47.3 in ( 120 cm )
Winch Case - Width	38.4 in ( 98 cm )

Dealer Contact Info:

Wagner Equipment Co.

Wagner Equipment Co. Dealer Info

Wagner Equipment Co. Website

Click here to email Wagner Equipment Co..

Contact: Equipment Manager

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon