Equipment ↠ Caterpillar ↠ Skid Steer Loaders ↠ THIS 2003 Caterpillar 246

2003 Caterpillar 246

Name: 2003 Caterpillar 246
Brand: Caterpillar
Price: 1 USD
Availability: OutOfStock

MACHINE SOLD

Click here to bid and see more info →

Ritchie Bros. Auctioneers

Ritchie Bros. Auctioneers Dealer Info

Ritchie Bros. Auctioneers Website

Click here to email Ritchie Bros. Auctioneers.

Click for Phone Number

Machine Info:

Hours:	3894
Serial Number:	CAT00246L5SZ06470
Machine Location:	LOS ANGELES, CA

Description:

Open Operator Station, Joystick Steering, US EPA Label, Aperture Tires, Manual Coupler, 73 in Bucket THE CLOSING TIMES OF LOTS 30 THRU 31 ARE TIED TOGETHER. IF A BID IS RECEIVED, THEN A TIME EXTENSION WILL BE APPLIED TO ALL LOTS. ONCE THE TIME CLOSES, THE HIGH BIDDER ON EACH PIECE WILL BE THE WINNER, Closing Time: 2024-04-18 09:04:32 AM

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Cab
FOPS	SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
FOPS Level II	SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
ROPS	SAE J1040 MAY94 and ISO3471:1994
Dimensions
Bucket Pin Height - Carry Position	10.0 in ( 25 cm )
Bucket Pin Height - Maximum Lift	10.2 ft ( 3 m )
Bumper Overhang - Rear Axle	41.0 in ( 104 cm )
Clearance at Max Lift and Dump	7.9 ft ( 2 m )
Clearance at Maximum Lift and Dump	94.0 in ( 239 cm )
Ground Clearance	9.0 in ( 23 cm )
Height - Top of Cab	6.9 ft ( 2 m )
Length - With Bucket on Ground	138.0 in ( 351 cm )
Length - Without Bucket	110.0 in ( 279 cm )
Length w/o Bucket	9.2 ft ( 3 m )
Length with Bucket	11.8 ft ( 4 m )
Maximum Overall Height	156.0 in ( 396 cm )
Reach - Maximum Lift/Dump	21.0 in ( 53 cm )
Reach at Max Lift and Dump	23.2 in ( 59 cm )
Turning Radius from Center - inc bucket	86.5 in ( 220 cm )
Vehicle Width over Tires	66.0 in ( 168 cm )
Wheel Base	3.8 ft ( 1 m )
Wheelbase	3.8 ft ( 1 m )
Width Over Tires	6.1 ft ( 2 m )
Engine
Aspiration	Turbocharged
Bore	3.9 in ( 10 cm )
Displacement	183.0 cu in
Engine Make	Caterpillar
Engine Model	Cat 3034C
Net Flywheel Power	55.0 hp ( 41 kw )
Number of Cylinders	4.0
Power Measured @	2,600.0 rpm
Stroke	4.0 in ( 10 cm )
Hydraulic System
Hydraulic Flow	Standard flow
Loader Hydraulic Flow	22.0 gpm ( 83 lpm )
Loader Hydraulic Pressure	3,300.0 psi
Pump Flow Capacity	22.0 gpm ( 83 lpm )
Loader
Bucket Capacity	0.6 cu yd ( 0 cu m )
Operating Load Rating	2,000.0 lbs ( 907 kg )
Tipping Angle	3410 deg
Operating Specifications
Breakout Force - Lift Cylinder	4,339.0 lbs ( 1,968 kg )
Breakout Force - Tilt Cylinder	5,259.0 lbs ( 2,385 kg )
Fuel Capacity	23.8 gal ( 90 l )
Hydraulic System Fluid Capacity	13.8 gal ( 52 l )
Max Speed	6.9 mph ( 11 kph )
Operating Speed	7.6 mph ( 12 kph )
Operational Weight	7,230.0 lbs ( 3,280 kg )
Rated Operating Capacity	2,000.0 lbs ( 907 kg )
Rated Operating Capacity with Optional Counterweight	2,100.0 lbs ( 953 kg )
Tipping Load	4,000.0 lbs ( 1,814 kg )
Service Refill Capacities
Chain Box - Each Side	2.0 gal ( 8 l )
Cooling System	2.6 gal ( 10 l )
Engine Crankcase	1.8 gal ( 7 l )
Fuel Tank	23.8 gal ( 90 l )
Hydraulic System	13.7 gal ( 52 l )
Hydraulic Tank	9.2 gal ( 35 l )
Weights
Operating Weight	7,087.0 lbs ( 3,215 kg )

Dealer Contact Info:

Ritchie Bros. Auctioneers

Ritchie Bros. Auctioneers Dealer Info

Ritchie Bros. Auctioneers Website

Click here to email Ritchie Bros. Auctioneers.

Contact:

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon