Equipment ↠ Caterpillar ↠ Skid Steer Loaders ↠ THIS Caterpillar 272C

Caterpillar 272C For Sale in Louisville, KY

Name: Caterpillar 272C
Brand: Caterpillar
Price: 44000 USD
Availability: InStock

❮

❯

For Sale: $44,000.00 USD

Apply for Financing

Boyd CAT

Boyd CAT Dealer Info

Boyd CAT Website

Click here to email Boyd CAT.

Contact: Scott Robinson

Click for Phone Number

Machine Info:

Hours:	3021
Serial Number:	RED02289
Machine Location:	LOUISVILLE, KY
More Information:	https://catused.com/cu/10031953

Description:

AIR CONDITIONER, AM FM RADIO, AUXILIARY HYDRAULICS, BUCKET, CE PLATE, COUPLER, HYDRAULIC, EPA LABEL, EROPS, HEATER / DEFROSTER, HIGH FLOW HYDRAULICS, LIGHTING, Online Owner's Manual , PILOT CONTROL, PRODUCT LINK, SELF LEVELING, ULTRA LOW SULFUR DIESEL FUEL

Machine Details:

GENERAL APPEARANCE
Cleaning Required	No
S.O.S. Taken	No
SAFETY ITEMS
ROPS	Yes
Safety Decals In Place	Yes
Safety Decals Legible	Yes
GAUGES, OPERATOR STATION, CONSOLE
Back Up Alarm	No
Current O&MM	No
Current Parts Manual	No
Current Safety Manual	No
ROPS Certification Plate	Yes
ENGINE
Blow By	No
Compression in Radiator	No
EPA Decal	Yes
Fluid Levels OK?	Yes
Knocking	No
Oil Leaks	No
Water in Oil	No
COOLING SYSTEM
Leaks - COOLING SYSTEM	No
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block Heater	Yes
Ether Aid	No
TANDEMS/GEARS/BEARINGS/CHAINS
Front Axle	Good
Lines / Linkages	Good
Operating Condition - TANDEMS/GEARS/BEARINGS/CHAINS	Good
Rear Axle	Good
Travel Controls	Good
Travel Motors	Good
Travel Pumps	Good
HYDRAULICS
Leaks - HYDRAULICS	No
BUCKET
Bucket Bottom	Good
Bucket Linkage	Good
Bucket Sides	Good
Cutting Edges	Good
Loader Frame	Good
Loader Pins & Bushings	Good
Quick Coupler	Good
TIRES
Leaks - HYDRAULICS	F 40% R 70%
Leaks - HYDRAULICS	12 X 16.5

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Cab
FOPS	SAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81, ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94, ISO 3471:1994
Dimensions
Bucket Pin Height - Carry Position	7.8 in ( 20 cm )
Bucket Pin Height - Maximum Lift	10.8 ft ( 3 m )
Bucket Pin Reach - Maximum Lift	14.7 in ( 37 cm )
Bumper Overhang - Rear Axle	42.8 in ( 109 cm )
Clearance at Max Lift and Dump	8.2 ft ( 3 m )
Clearance at Maximum Lift and Dump	97.9 in ( 249 cm )
Departure Angle	26 deg
Ground Clearance	8.8 in ( 22 cm )
Height - Top of Cab	6.9 ft ( 2 m )
Length - With Bucket on Ground	150.9 in ( 383 cm )
Length - Without Bucket	122.8 in ( 312 cm )
Length w/o Bucket	10.8 ft ( 3 m )
Length with Bucket	12.5 ft ( 4 m )
Maximum Dump Angle	51 deg
Maximum Overall Height	162.0 in ( 411 cm )
Maximum Reach - With Arms Parallel	50.0 in ( 127 cm )
Rack Back Angle - Maximum Height	83 deg
Reach - Maximum Lift/Dump	30.1 in ( 76 cm )
Reach at Max Lift and Dump	30.0 in ( 76 cm )
Turn Radius from Center - Bucket	89.1 in ( 226 cm )
Turn Radius from Center - Coupler	57.1 in ( 145 cm )
Turn Radius from Center - Rear	70.7 in ( 180 cm )
Turning Radius from Center - inc bucket	101.5 in ( 258 cm )
Turning Radius from Center - machine rear	58.3 in ( 148 cm )
Vehicle Width over Tires	66.0 in ( 168 cm )
Wheel Base	4.6 ft ( 1 m )
Wheelbase	4.5 ft ( 1 m )
Width Over Tires	5.5 ft ( 2 m )
Engine
Bore	3.7 in ( 9 cm )
Displacement	201.0 cu in ( 3,294 cu cm )
Engine Make	Caterpillar
Engine Model	Cat C3.4 DIT
Engine Power - ISO 14396	93.0 hp ( 69 kw )
Gross Power - SAE J1995	94.0 hp ( 70 kw )
Net Flywheel Power	90.0 hp ( 67 kw )
Net Power - EEC 80/1269	91.0 hp ( 68 kw )
Net Power - ISO 9249 EEC	91.0 hp ( 68 kw )
Net Power - SAE 1349	90.0 hp ( 67 kw )
Number of Cylinders	4.0
Power Measured @	2,500.0 rpm
Stroke	4.7 in ( 12 cm )
Hydraulic System
Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow XPS
Hydraulic Power	42.8 hp ( 32 kw )
Loader Hydraulic Flow	22.0 gpm ( 83 lpm )
Loader Hydraulic Pressure	3,335.0 psi
Maximum Loader Hydraulic Flow	33.0 gpm ( 125 lpm )
Maximum Loader Hydraulic Pressure	4,061.0 psi
Pump Flow Capacity	22.0 gpm ( 83 lpm )
Relief Valve Pressure	3,335.0 psi
Loader
Breakout Force	7,315.0 psi
Bucket Capacity	0.6 cu yd ( 0 cu m )
Operating Load Rating	3,250.0 lbs ( 1,474 kg )
Operating Width	66.0 in ( 168 cm )
Tipping Angle	6500 deg
Operating Specifications
Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	7,315.0 lbs ( 3,318 kg )
Chain Box Fluid Capacity - each side	2.9 gal ( 11 l )
Cooling System Fluid Capacity	3.7 gal ( 14 l )
Engine Oil Fluid Capacity	2.6 gal ( 10 l )
Fuel Capacity	26.0 gal ( 98 l )
Hydraulic System Fluid Capacity	15.0 gal ( 57 l )
Max Speed	7.2 mph ( 12 kph )
Operating Voltage	12.0 volts
Operational Weight	8,292.0 lbs ( 3,761 kg )
Rated Operating Capacity	3,250.0 lbs ( 1,474 kg )
Rated Operating Capacity with Optional Counterweight	3,480.0 lbs ( 1,579 kg )
Tipping Load	6,500.0 lbs ( 2,948 kg )
Power Train
Travel Speed Forward	7.2 mph ( 12 kph )
Travel Speed Forward - 2-Speed Option	10.0 mph ( 16 kph )
Travel Speed Reverse	7.2 mph ( 12 kph )
Travel Speed Reverse - 2-Speed Option	10.0 mph ( 16 kph )
Service Refill Capacities
Chain Box - Each Side	2.9 gal ( 11 l )
Cooling System	3.7 gal ( 14 l )
Engine Crankcase	2.6 gal ( 10 l )
Fuel Tank	26.0 gal ( 98 l )
Hydraulic System	15.0 gal ( 57 l )
Hydraulic Tank	11.0 gal ( 42 l )
Weights
Operating Weight	8,362.0 lbs ( 3,793 kg )

Dealer Contact Info:

Boyd CAT

Boyd CAT Dealer Info

Boyd CAT Website

Click here to email Boyd CAT.

Fax: 502-778-3453

Contact: Scott Robinson

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon