Equipment ↠ John Deere ↠ Motor Graders ↠ THIS 1993 John Deere 670B

1993 John Deere 670B For Sale in South Mills, NC

Name: 1993 John Deere 670B
Brand: John Deere
Price: 34500 USD
Availability: InStock

❮

❯

For Sale: $34,500.00 USD

Apply for Financing

Southeastern Equipment Corporation

Southeastern Equipment Corporation Dealer Info

Southeastern Equipment Corporation Website

Click here to email Southeastern Equipment Corporation.

Contact: Bryan Smith

Click for Phone Number

Machine Info:

Serial Number:	542971
Stock Number:	08-8747
Machine Location:	SOUTH MILLS, NC

Description:

Enclosed cab with heat, rearview camera, “Cat Style” controls, front mounted scarifier. New cutting edge. Original paint with no damage, no leaks, very clean, straight and tight. Well maintained grader in good condition. Hour meter shows 1,312, nice grader but the hour meter isn’t accurate.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front	49 deg
Blade Tip Angle - Rear	5 deg
Diameter	59.9 in ( 152 cm )
Max Lift Above Ground	17.5 in ( 44 cm )
Max Reach Outside Tires - Left	85.1 in ( 216 cm )
Max Reach Outside Tires - Right	83.1 in ( 211 cm )
Rotation	360 deg
Shift Left	31.0 in ( 79 cm )
Shift Right	28.6 in ( 73 cm )
Dimensions
Blade Base	8.8 ft ( 3 m )
Front Ground Clearance	1.9 ft ( 1 m )
Height to Top of Isomount Cab	10.1 ft ( 3 m )
Overall Length	27.3 ft ( 8 m )
Tandem Axle Wheelbase	5.1 ft ( 2 m )
Wheelbase	19.6 ft ( 6 m )
Width Over Tires	7.9 ft ( 2 m )
Engine
Aspiration	Turbocharged
Displacement	414.0 cu in ( 0 cu m )
Engine Model	6068T
Max Power	135.0 hp ( 101 kw )
Net Power Gears 7-8	135.0 hp ( 101 kw )
Net Torque Gears 7-8	460.0 lbs ft
Number of Cylinders	6.0
Power Measured @	2,300.0 rpm
Torque Measured @	1,300.0 rpm
Front Axle
Ground Clearance	1.9 ft ( 1 m )
Oscillation - Total	32 deg
Wheel Lean	20 deg
Hydraulic System
Pump Flow	37.6 gpm ( 142 lpm )
Pump Type	variable displacement single hydraulic pump
Moldboard
Moldboard Height	24.0 in ( 61 cm )
Moldboard Thickness	0.9 in ( 2 cm )
Moldboard Width	12.0 ft ( 4 m )
Side Shift Left	26.9 in ( 68 cm )
Side Shift Right	26.9 in ( 68 cm )
Operating Specifications
Alternator Supplied Amperage	42 amps
Circle Gearbox Fluid Capacity	3.0 gal ( 11 l )
Cooling System Fluid Capacity	7.0 gal ( 27 l )
Fuel Capacity	70.0 gal ( 265 l )
Hydraulic System Fluid Capacity	14.0 gal ( 53 l )
Max Operation Weight - Front Axle	9,870.0 lbs ( 4,477 kg )
Max Operation Weight - Rear Axle	23,440.0 lbs ( 10,632 kg )
Max Operation Weight - Total	33,310.0 lbs ( 15,109 kg )
Oil System Fluid Capacity	5.0 gal ( 19 l )
Operating Voltage	24.0 volts
Std Operation Weight - Front Axle	8,620.0 lbs ( 3,910 kg )
Std Operation Weight - Rear Axle	20,410.0 lbs ( 9,258 kg )
Std Operation Weight - Total	29,030.0 lbs ( 13,168 kg )
Tandem Case Fluid Capacity (each)	5.0 gal ( 19 l )
Tire Size	13.00-25
Steering System
Articulation Angle	25 deg
Turning Radius	22.0 ft ( 7 m )
Transmission
Max Speed - Forward	24.4 mph ( 39 kph )
Max Speed - Reverse	8.2 mph ( 13 kph )
Number of Gears - Forward	8.0
Number of Gears - Reverse	4.0
Transmission Type	Power Shift

Dealer Contact Info:

Southeastern Equipment Corporation

Southeastern Equipment Corporation Dealer Info

Southeastern Equipment Corporation Website

Click here to email Southeastern Equipment Corporation.

Contact: Bryan Smith

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon