Equipment ↠ Volvo ↠ Motor Graders ↠ THIS 2003 Volvo G726B

2003 Volvo G726B For Sale in Lena, WI

Name: 2003 Volvo G726B
Brand: Volvo
Price: 59800 USD
Availability: InStock

❮

❯

For Sale: $59,800.00 USD

Apply for Financing

D&B Construction Equipment

D&B Construction Equipment Dealer Info

D&B Construction Equipment Website

Click here to email D&B Construction Equipment.

Click for Phone Number

Machine Info:

Stock Number:	7398
Machine Location:	LENA, WI

Description:

AWD, Only 5,130, 70% Michelin Snoplus Radials, 14 Foot Moldboard, Runs Out Very Well., Ask about Our Warrantied Equipment., Financing available to qualified buyers through AgDirect., If you don’t see what you’re looking for visit dbequip. com and click on our ‘want to buy search’. All of our machines are located in our yard in Lena, WI 54139. Each piece of equipment is test run then is serviced in our shop by quality technicians. D&B Construction Equipment Inc has been selling and servicing used construction equipment for over 40 years. We have a full staff of salesmen and technicians with over 100 years of combined experience. Our experience gives us what we need to help you.

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Circle
Blade Tip Angle - Front	44 deg
Blade Tip Angle - Rear	6.5 deg
Diameter	66.3 in ( 168 cm )
Max Lift Above Ground	17.5 in ( 44 cm )
Max Reach Outside Tires - Left	79.5 in ( 202 cm )
Max Reach Outside Tires - Right	79.0 in ( 201 cm )
Rotation	360 deg
Shift Left	30.5 in ( 77 cm )
Shift Right	29.5 in ( 75 cm )
Dimensions
Blade Base	8.6 ft ( 3 m )
Height to Top of Isomount Cab	10.2 ft ( 3 m )
Overall Length	30.0 ft ( 9 m )
Wheelbase	20.0 ft ( 6 m )
Width Over Tires	8.4 ft ( 3 m )
Engine
Aspiration	Turbocharged
Displacement	436.0 cu in ( 7,145 cu cm )
Engine Model	D7DGDE2
Max Power	235.0 hp ( 175 kw )
Net Power Gears 7-8	235.0 hp ( 175 kw )
Net Torque Gears 7-8	774.0 lbs ft ( 1,049 nm )
Number of Cylinders	6.0
Power Measured @	2,200.0 rpm
Torque Measured @	1,400.0 rpm
Front Axle
Ground Clearance	2.1 ft ( 1 m )
Oscillation - Total	16 deg
Wheel Lean	15 deg
Hydraulic System
Pump Flow	75.1 gpm ( 284 lpm )
Pump Type	load sensing hydraulic
Relief Valve Pressure	391.7 psi
Moldboard
Blade Down Pressure	17,854.0 lbs ( 8,098 kg )
Blade Pull at Max Weight	22,621.0 lbs ( 10,261 kg )
Max Depth of Cut	32.0 in ( 81 cm )
Moldboard Height	25.0 in ( 64 cm )
Moldboard Thickness	0.9 in ( 2 cm )
Moldboard Width	12.0 ft ( 4 m )
Side Shift Left	26.5 in ( 67 cm )
Side Shift Right	26.5 in ( 67 cm )
Operating Specifications
Alternator Supplied Amperage	80 amps
Cooling System Fluid Capacity	7.4 gal ( 28 l )
Fuel Capacity	100.0 gal ( 379 l )
Hydraulic System Fluid Capacity	35.4 gal ( 134 l )
Operating Voltage	24.0 volts
Rear Diff/Final Drive Fluid Capacity	6.1 gal ( 23 l )
Std Operation Weight - Front Axle	10,267.0 lbs ( 4,657 kg )
Std Operation Weight - Rear Axle	25,135.0 lbs ( 11,401 kg )
Std Operation Weight - Total	35,399.7 lbs ( 16,057 kg )
Tandem Case Fluid Capacity (each)	26.5 gal ( 100 l )
Tire Size	14.00 x 24, G-2
Transmission Fluid Capacity	10.1 gal ( 38 l )
Steering System
Articulation Angle	22 deg
Transmission
Max Speed - Forward	28.5 mph ( 46 kph )
Max Speed - Reverse	20.4 mph ( 33 kph )
Number of Gears - Forward	8.0
Number of Gears - Reverse	4.0
Transmission Type	Powershift

Dealer Contact Info:

D&B Construction Equipment

D&B Construction Equipment Dealer Info

D&B Construction Equipment Website

Click here to email D&B Construction Equipment.

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon