Equipment ↠ Komatsu ↠ Motor Graders ↠ THIS Komatsu GD555-3

Komatsu GD555-3

Name: Komatsu GD555-3
Brand: Komatsu
Price: 1 USD
Availability: OutOfStock

❮

❯

MACHINE SOLD

Auction Info: Starting on 2024-05-18

Jeff Martin Auctioneers, Inc

Jeff Martin Auctioneers, Inc Dealer Info

Jeff Martin Auctioneers, Inc Website

Click here to email Jeff Martin Auctioneers, Inc.

Click for Phone Number

Machine Info:

Serial Number:	51232
Machine Location:	BROOKLYN, MS
More Information:	https://www.jeffmartinauctioneers.com/auctions/888/lot/199103-KOMATSU-GD5553C-MOTORGRADER-SN%3A-51232

Description:

KOMATSU MOTORGRADER,

From the manufacturer:

Supplied by HeavyEquipmentData.com →

Blades
Maximum Shoulder Reach Outside of Tires - Left	79.0 in ( 201 cm )
Maximum Shoulder Reach Outside of Tires - Right	79.0 in ( 201 cm )
Moldboard Sideshift - Left	25.0 in ( 64 cm )
Moldboard Sideshift - Right	25.0 in ( 64 cm )
Circle
Blade Tip Angle - Front	40 deg
Blade Tip Angle - Rear	5 deg
Diameter	60.2 in ( 153 cm )
Max Lift Above Ground	19.1 in ( 49 cm )
Max Reach Outside Tires - Left	78.7 in ( 200 cm )
Max Reach Outside Tires - Right	78.7 in ( 200 cm )
Rotation	360 deg
Shift Left	24.5 in ( 62 cm )
Shift Right	24.5 in ( 62 cm )
Dimensions
Blade Base	8.2 ft ( 3 m )
Height to Top of Isomount Cab	10.2 ft ( 3 m )
Overall Length	30.9 ft ( 9 m )
Tandem Axle Wheelbase	5.0 ft ( 2 m )
Wheelbase	19.2 ft ( 6 m )
Width Over Tires	8.3 ft ( 3 m )
Engine
Aspiration	Turbocharged and aftercooled
Base Power (1st Gear) - Net	140.0 hp ( 104 kw )
Displacement	359.0 cu in ( 5,883 cu cm )
Engine Model	SAA6D102E-2
Max Power	160.0 hp ( 119 kw )
Net Power Gear 1-2	140.0 hp ( 104 kw )
Net Power Gear 4-6	160.0 hp ( 119 kw )
Net Power Gear 5-6	160.0 hp ( 119 kw )
Net Power Gears 7-8	160.0 hp ( 119 kw )
Net Torque Gears 1-2	425.0 lbs ft ( 576 nm )
Net Torque Gears 3-4	538.0 lbs ft ( 729 nm )
Net Torque Gears 5-6	538.0 lbs ft ( 729 nm )
Net Torque Gears 7-8	538.0 lbs ft ( 729 nm )
Number of Cylinders	6.0
Power Measured @	2,000.0 rpm
Torque Measured @	1,500.0 rpm
Front Axle
Ground Clearance	2.0 ft ( 1 m )
Oscillation - Total	32 deg
Wheel Lean	20 deg
Hydraulic System
Pump Flow	54.0 gpm ( 204 lpm )
Pump Type	Closed Center Load Sensing System (CLSS) hydraulics
Relief Valve Pressure	3,000.0 psi
Moldboard
Max Depth of Cut	32.9 in ( 84 cm )
Moldboard Height	26.0 in ( 66 cm )
Moldboard Length	12.0 ft ( 4 m )
Moldboard Thickness	0.9 in ( 2 cm )
Moldboard Width	12.0 ft ( 4 m )
Side Shift Left	32.3 in ( 82 cm )
Side Shift Right	32.3 in ( 82 cm )
Operating Specifications
Alternator Supplied Amperage	90 amps
Circle Gearbox Fluid Capacity	1.5 gal ( 6 l )
Cooling System Fluid Capacity	11.1 gal ( 42 l )
Fuel Capacity	89.9 gal ( 340 l )
Hydraulic System Fluid Capacity	22.5 gal ( 85 l )
Oil System Fluid Capacity	3.8 gal ( 14 l )
Operating Voltage	24.0 volts
Operating Weight	30,950.0 lbs ( 14,039 kg )
Std Operation Weight - Front Axle	8,818.5 lbs ( 4,000 kg )
Std Operation Weight - Rear Axle	22,134.5 lbs ( 10,040 kg )
Std Operation Weight - Total	30,952.9 lbs ( 14,040 kg )
Tandem Case Fluid Capacity (each)	21.9 gal ( 83 l )
Tire Size	Low pressure, tubeless, 14.00 X 24, 12 ply rating - G2
Transmission Fluid Capacity	11.9 gal ( 45 l )
Steering System
Articulation Angle	23 deg
Turning Radius	22.4 ft ( 7 m )
Transmission
Max Speed - Forward	26.7 mph ( 43 kph )
Max Speed - Reverse	24.3 mph ( 39 kph )
Number of Gears - Forward	8.0
Number of Gears - Reverse	4.0
Transmission Type	Full power shift transmission

Dealer Contact Info:

Jeff Martin Auctioneers, Inc

Jeff Martin Auctioneers, Inc Dealer Info

Jeff Martin Auctioneers, Inc Website

Click here to email Jeff Martin Auctioneers, Inc.

Fax:

Click for Phone Number

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon