JCB 100C-1


Approach angle31 °
Blade width1,550 mm (61 in)
Dig depth (below ground)1.40 ft (0 m)
Height10.60 in (27 cm)
Maximum height1.10 ft (0 m)
Reach in front of tracks1.20 ft (0 m)


Boom swing left45 °
Boom swing right60 °
Bucket rotation189 °
Bucket tearout5,170.70 lbs (2,345 kg)
Dipper rotation119 °
Dipper tearout3,821.80 lbs (1,734 kg)
Slew speed9.60 rpm

Boom/Stick Excavator Option 1

Max Digging Reach15.70 in (40 cm)
Max Reach Along Ground15.30 ft (5 m)
Max.Dumping Height10.60 ft (3 m)
Maximum digging depth - dozer down10.10 ft (3 m)
Maximum digging depth - dozer up9 ft (3 m)
Maximum height to dipper nose pivot pin12.60 ft (4 m)
Maximum vertical wallcut depth6.90 ft (2 m)
Minimum front swing radius (fully offset)6.20 ft (2 m)
Minimum front swing radius (no offset)6.80 ft (2 m)


Cab height61.20 in (155 cm)
Ground Clearance1.20 ft (0 m)
Height - Top of Cab7.90 ft (2 m)
Overall width of superstructure5.10 ft (2 m)
Removal Counterweight Clearance2.50 ft (1 m)
Tail Swing Radius4.10 ft (1 m)
Track Gauge4.20 ft (1 m)
Transport Height- Minimum7,874.10 ft (2,400 m)
Transport Length, Minimum13,385.90 ft (4,080 m)
Width Over Tracks5 ft (2 m)


2.72 hp (1 kw)
Alternator65 A
Cooling systemWater cooled
Displacement91,291.60 cu in (1 m)
Engine Model403
Gross Power24.70 hp (18 kw)
Net Power22.20 hp (17 kw)
Power Measured @2,100 rpm
Torque Measured @1,800 rpm

Hydraulic System

Auxiliary hydraulic flow15.60 gal/min (59 l/min)
Excavator/track main relief235
Nominal output25.40 gal/min (96 l/min)
Pump Type2
Slew main relief190

Operating Specifications

Cooling System Fluid Capacity2.30 gal (9 l)
Engine Oil Capacity1.20 gal (5 l)
Fuel Capacity14.80 gal (56 l)
Hydraulic Pump Flow Capacity17.50 gal/min (66 l/min)
Hydraulic System Fluid Capacity18.80 gal (71 l)
Operating Weight6,320.70 lbs (2,867 kg)
Operational Voltage12


Travel speed low1.60 mph (3 kph)
Travel Speed - High3.10 mph (5 kph)


Number of Track Rollers per Side3
Track tensionGrease
Tractive Effort55.20 lbs (25 kg)

Find Comparables by Category