Atlas Copco Construction Tools Inc.’s MG 1800 hydraulic demolition multi-grapple attachment has a high load capacity of 1.1 cu. yd. (.84 cu m) and a maximum closing force of 8 tons (7.3 t).

The MG 1800 is ideal for sorting and loading rubble, as well as demolition of masonry and wooden structures.

At a service weight of 3,968 lb. (1,799 kg), the MG 1800 is suitable for carriers in the 20 to 30 metric ton weight class.

The unit operates at a maximum pressure of 5,076 psi and accepts maximum hydraulic flow of 40 gal. (151 L) per minute.

The grapple jaws of the MG 1800 open to a width of 87 in. (221 cm) to provide jaw capacity for various demolition applications.

The jaws feature large bearing surfaces for reduced wear.

Each jaw tip features a replaceable wear edge that can be flipped to provide a second wear surface.

A 360-degree hydraulic rotation unit on the MG 1800 allows for accurate positioning of the attachment.

Additionally, two hydraulic cylinders increase the grapple’s closing forces.

The cylinders are protected against outside debris, and a built-in rotation protection system reduces wear and tear on the carrier.

Optional loading plates are available to improve grapple capacity. The plates fasten to and close the sides of the grapple jaws to contain material when loading.

For more information, call 413/746-0020 or visit www.atlascopco.com

Today's top stories

New Bridges Part of Iowa's $114M Madison Avenue Project

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

SAKAI Achieves Record Sales, Production

Takeuchi Recognizes Top Dealers at 2024 Dealer Summit

Muddy Water Dredging Christens Marlin Class Dredge

Indiana Officials Mark Start of 2024 Construction Season, Promote Safety

Leica Geosystems Launches its First Machine Smart Antenna — Leica iCON gps 120