List Your Equipment  /  Dealer Login

Atlas Copco Introduces New Waterwell Rig at NGWA Expo

Wed December 07, 2011 - National Edition
Construction Equipment Guide


Atlas Copco introduced the new Series III of its T2W waterwell drill rig at the NGWA Expo in Las Vegas, Nev., on Nov. 30, 2011. The T2W-III is Atlas Copco’s single-engine rig for rotary and down-the-hole (DTH) drilling in the 30,000 lb. class. It is designed for both air and mud applications, and ships with an on-board 900/350 air compressor.

The Series III provides a 12 rod capacity in the carousel at 3.5 in. (89 cm), with swing in/swing out back load capability — designed to allow single-person operation under appropriate conditions. A rod box, mounted to the rig, carries an additional 12 rods at 3.5 in. Total depth capacity is 480 ft. (146 m).

Another new feature is an optional 15,000 lb. (6,804 kg) winch with two-part line, matching the pullback of the rig. This allows the operator to trip out of the hole with the winch or the head. Additional new features include an optional hydraulic front drive assist that delivers a functional 6x6 drive. The automatic transmission provides reduced fuel consumption as well as simplified operation and training.

Two three-speed options are available for the head. A gear-driven head constructed with oversized gears, shafts and bearings is offered for large torque applications, and a smaller, less complex hydraulic vane-driven head is offered for lower torque operation.

The new Series III has a single-cylinder cable feed system that is internal to the tubular derrick, protecting moving components from exposure to the typical drilling environment and rod handling operations. Major components of the feed system are engineered to be larger and more mechanically efficient, so as to reduce fatigue and maintenance. Series I of the T2W had a rack and pinion feed system, while the Series II shipped with a sheave and cable feed system.

An optional 500 hp (372 kW) engine is available, and selection between drill and drive mode is made through a split-shaft PTO drive system.

For more information, call 800/732-6762 or visit www.atlascopco.us.




Today's top stories

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

Volvo CE Continues to Perform, Transform During Slower Q1 2024

American Bridge Co. Leads Conn.'s East Haddam Swing Bridge Project

Pettibone Celebrates 75th Anniversary of Cary-Lift

Common Ground Alliance Hosts Conference & Expo in Colorado On Preventing Utility Damages

Going Beyond Diversity: Star Equipment's Rental Advantage

Volvo CE Launches Updated L30, L35 Compact Wheel Loaders


 






aggregateequipmentguide-logo agriculturalequipmentguide-logo craneequipmentguide-logo forestryequipmentguide-logo truckandtrailerguide-logo
39.96250 \\ -83.00610 \\ Columbus \\ PA