Port of Savannah's $220.5M Upgrade to Double Capacity

Carolina Cat Showcases Next Gen Equipment at Charlotte Area Event

Mon July 15, 2019 - Southeast Edition #15
CEG



On June 12 and 13, Carolina Cat hosted consecutive demo days for customers in the Charlotte, N.C., region featuring Caterpillar's latest and greatest in new technology. More than 400 people attended the two-day event, which showcased Cat's Next Generation equipment lines spread out over approximately 20 acres. Customers were given the chance to operate their choice of new machinery while receiving valuable product information from the Carolina Cat staff members that were on-hand providing assistance.

An estimated 50 machines were available to test out, including: five different dozers; four 20- and 30-ton factory grade excavators with 3D technology; five mini-excavators with an easy-to-operate stick steer, user-friendly controls and an intuitive Next Gen monitor; the Cat 120 motorgrader with a steering wheel; the 740 ejector truck; and six unique skid steer and compact track loaders with Trimble Earthworks Go!

One positive attribute of the Next Gen excavators and dozers is that much of the equipment's preventative maintenance cycle has been removed, allowing for 40 percent less maintenance cost to the owner. Instead of going 250-hour intervals, they have now gone to 500-hour and sometimes even 750-hour intervals before PMs must be conducted. The machines also burn cleaner fuel at 25 percent better fuel efficiency. For Cat's line of Next Gen dozers, users may choose from updated configurations and enjoy a fully redesigned cab and a choice of tradtional transmission or electric drive on the XE models.

Although they do not belong to the Next Gen family, Carolina Cat was equally promoting the usefulness of its Caterpillar ejector truck line during the two demo days. "Most of the dump trucks that you see are tipper trucks, which means they stop, dead stop, raise the bed and dump material," explained Mark Kincer, sales manager. "However, you lose the time when you stop." Ejector trucks are able to maintain their speed to the point where they complete 50 percent more cycles. They are available in two varieties: the 740 (40-ton) and the 730 (30-ton).

Testing out a group of Caterpillar’s excavators.
Testing out a group of Caterpillar’s excavators.

(L-R): Chad, Jaida and Neal Wesson of Two Brothers Utility in Shelby, N.C. meet up with Ben Patrick of Carolina Cat and Caterpillar’s Scott Thomas.
(L-R): Chad, Jaida and Neal Wesson of Two Brothers Utility in Shelby, N.C. meet up with Ben Patrick of Carolina Cat and Caterpillar’s Scott Thomas.

Brian Allen of Allen’s Grading in Monroe, N.C., tests out the fully remote-controlled Cat 289D compact track loader.
Brian Allen of Allen’s Grading in Monroe, N.C., tests out the fully remote-controlled Cat 289D compact track loader.

Caterpillar’s D6N dozer with Grade Control.
Caterpillar’s D6N dozer with Grade Control.

A fleet of Cat dozers are demoed for the customers in attendance.
A fleet of Cat dozers are demoed for the customers in attendance.

The Cat D6K2 LGP.
The Cat D6K2 LGP.

The Cat D6LGP and Cat D6XE in action.
The Cat D6LGP and Cat D6XE in action.

Moving a big pile of dirt is easy with the Cat 740 EJ articulated truck.
Moving a big pile of dirt is easy with the Cat 740 EJ articulated truck.

Cat’s extensive line of mini-excavators has a product for all project needs both big and small.
Cat’s extensive line of mini-excavators has a product for all project needs both big and small.

A Caterpillar motorgrader is put to work.
A Caterpillar motorgrader is put to work.

Sitech Mid-Atlantic was on hand to offer guidance on aftermarket Earthworks machine control solutions and SiteWorks jobsite GPS infrastructure products. (L-R) are Travis Waller and John Balanda, Sitech Mid-Atlantic; Carlos Ramirez and Rod Elliott, Trimble; Josh Ayers and Becky Huskins, Sitech Mid-Atlantic; Paul Thomas, Trimble; Dave Schoenfeld, Propeller Aero; Randy Rohrer and Kyle Myers, Sitech Mid-Atlantic.
Sitech Mid-Atlantic was on hand to offer guidance on aftermarket Earthworks machine control solutions and SiteWorks jobsite GPS infrastructure products. (L-R) are Travis Waller and John Balanda, Sitech Mid-Atlantic; Carlos Ramirez and Rod Elliott, Trimble; Josh Ayers and Becky Huskins, Sitech Mid-Atlantic; Paul Thomas, Trimble; Dave Schoenfeld, Propeller Aero; Randy Rohrer and Kyle Myers, Sitech Mid-Atlantic.

The Cat 740EJ artic truck and Cat 336 excavator.
The Cat 740EJ artic truck and Cat 336 excavator.

Talking Cat wheel loaders (L-R) are Andy Massey, Caterpillar; Mike Kunz and Mitch Christenbury, Carolina Cat; John Bryson and Donnie Parsell, Southern Concrete materials in Asheville, N.C.
Talking Cat wheel loaders (L-R) are Andy Massey, Caterpillar; Mike Kunz and Mitch Christenbury, Carolina Cat; John Bryson and Donnie Parsell, Southern Concrete materials in Asheville, N.C.

(L-R): John Williams and John Meade of Blythe Construction in Charlotte and Ryan Neal of Caterpillar.
(L-R): John Williams and John Meade of Blythe Construction in Charlotte and Ryan Neal of Caterpillar.

Todd Henry (L) and Keith Taylor of D.H. Griffin Infrastructure in Greensboro, N.C.
Todd Henry (L) and Keith Taylor of D.H. Griffin Infrastructure in Greensboro, N.C.

From the left are Seth Burkhalter, Caterpillar; Jeff Bryant, Jeffrey Bryant, Travis Bryant and Dwayne Bryant of Dwayne Bryant Construction in York, S.C.  They are checking out the Cat 299 compact loader featuring Caterpillar’s BB121 box blade with Trimble Earthworks Go!
From the left are Seth Burkhalter, Caterpillar; Jeff Bryant, Jeffrey Bryant, Travis Bryant and Dwayne Bryant of Dwayne Bryant Construction in York, S.C. They are checking out the Cat 299 compact loader featuring Caterpillar’s BB121 box blade with Trimble Earthworks Go!

(L-R): Mark Cash, Trevor Murray and Marty Shipman of Cash Grading Co. Inc. in Oakboro, N.C., with the next generation Cat 307.5 excavator with stick steer.
(L-R): Mark Cash, Trevor Murray and Marty Shipman of Cash Grading Co. Inc. in Oakboro, N.C., with the next generation Cat 307.5 excavator with stick steer.

Spencer Sain (L) of Carolina Cat and Phil Arrington of Arrington Grading in Statesville, N.C.  Arrington came to operate the 305.5 excavator; he’s a past user and feels the machine is just the right size for his site prep business. He has four other Cat machines.
Spencer Sain (L) of Carolina Cat and Phil Arrington of Arrington Grading in Statesville, N.C. Arrington came to operate the 305.5 excavator; he’s a past user and feels the machine is just the right size for his site prep business. He has four other Cat machines.

The Next Generation Cat 323 excavator drew the attention of Tom Nash, Fernando Chiriboga and Layne Zirkle of NGE Services in Charlotte.  Also shown is Ethan Mann of Thomas Grading Company in Mathews, N.C.
The Next Generation Cat 323 excavator drew the attention of Tom Nash, Fernando Chiriboga and Layne Zirkle of NGE Services in Charlotte. Also shown is Ethan Mann of Thomas Grading Company in Mathews, N.C.

(L-R): Getting ready to test out the factory payload on the Next Generation Cat 330 excavator are Michael Johnson, Martin Murray, Tony LaRocca and Ben Hildebran of Charah Solutions in Louisville, Ky., with Tracy Skipper of Carolina Cat.
(L-R): Getting ready to test out the factory payload on the Next Generation Cat 330 excavator are Michael Johnson, Martin Murray, Tony LaRocca and Ben Hildebran of Charah Solutions in Louisville, Ky., with Tracy Skipper of Carolina Cat.