All Equipment Category Specs ↠ Motor Graders ↠ Komatsu GD655-3

Komatsu GD655-3 Motor Grader

Category: Motor Graders (See all Motor Graders for sale)
Manufacturer: Komatsu (See all Komatsu Equipment for sale)
Model: GD655-3 (See all Komatsu GD655-3 for sale)

Blades

Maximum Shoulder Reach Outside of Tires - Left	79 in
Maximum Shoulder Reach Outside of Tires - Right	79 in
Moldboard Sideshift - Left	25 in
Moldboard Sideshift - Right	25 in

Circle

Blade Tip Angle - Front	40 deg
Blade Tip Angle - Rear	5 deg
Diameter	60.2 in
Max Lift Above Ground	19.9 in
Rotation	360 deg
Shift Left	24.2 in
Shift Right	24.2 in

Dimensions

Blade Base	8.5 ft
Height to Top of Isomount Cab	10.3 ft
Overall Length	33.8 ft
Tandem Axle Wheelbase	5 ft
Wheelbase	20 ft
Width Over Tires	8.4 ft

Engine

Aspiration	Turbocharged and air-to-air aftercooled
Base Power (1st Gear) - Net	180 hp (134 kw)
Displacement	505 cu in
Engine Model	SAA6D114E-3
Max Power	200 hp (149 kw)
Net Power Gear 1-2	180 hp (134 kw)
Net Power Gear 4-6	200 hp (149 kw)
Net Power Gear 5-6	200 hp (149 kw)
Net Power Gears 7-8	200 hp (149 kw)
Net Torque Gears 1-2	612 lbs ft
Net Torque Gears 3-4	719 lbs ft
Net Torque Gears 5-6	719 lbs ft
Net Torque Gears 7-8	719 lbs ft
Number of Cylinders	6
Power Measured @	1900 rpm
Torque Measured @	1400 rpm

Front Axle

Ground Clearance	24.8 ft
Oscillation - Total	32 deg
Wheel Lean	20 deg

Hydraulic System

Pump Flow	51 gpm
Pump Type	Load-sensing closed center hydraulics with variable displacement piston pump
Relief Valve Pressure	3000 psi

Moldboard

Max Depth of Cut	32.1 in
Moldboard Height	26 in
Moldboard Length	12 ft
Moldboard Thickness	0.9 in
Moldboard Width	12 ft
Side Shift Left	32.3 in
Side Shift Right	32.3 in

Operating Specifications

Alternator Supplied Amperage	90 amps
Circle Gearbox Fluid Capacity	1.3 gal
Cooling System Fluid Capacity	10.4 gal
Fuel Capacity	89.9 gal
Hydraulic System Fluid Capacity	26.4 gal
Oil System Fluid Capacity	8 gal
Operating Voltage	24 volts
Operating Weight	37801 lbs
Std Operation Weight - Front Axle	9039 lbs
Std Operation Weight - Rear Axle	24912.3 lbs
Std Operation Weight - Total	33951.2 lbs
Tandem Case Fluid Capacity (each)	21.9 gal
Tire Size	low pressure, tubeless, 17.5R25
Transmission Fluid Capacity	11.9 gal

Steering System

Articulation Angle	23 deg
Turning Radius	22.7 ft

Transmission

Max Speed - Forward	26.2 mph (42 kph)
Max Speed - Reverse	23.9 mph (37 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Full power shift transmission

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon