All Equipment Category Specs ↠ Forklifts ↠ Hyster E65XN

Hyster E65XN Forklift

Category: Forklifts (See all Forklifts for sale)
Manufacturer: Hyster (See all Hyster Equipment for sale)
Model: E65XN (See all Hyster E65XN for sale)

Brakes

Parking brake	Mechanical
Service brake	Hydraulic

Dimensions

Front Tread Range	35.7 in (91 cm)
Gradeability	31%
Ground Clearance	3.6 in (9 cm)
Height to Top of Overhead Guard	7.4 ft (2 m)
Length to Fork Face	7.5 ft (2 m)
Overall Height - mast lowered	6.9 ft (2 m)
Overall Width	3.7 ft (1 m)
Rear Tread Range	36.1 in (92 cm)
Right Angle Stack	12 ft (4 m)
Turning Radius	6.6 ft (2 m)
Wheelbase	4.8 ft (1 m)

Engine

Engine Make	Hyster
Engine Model	E65XN
Power	24.7 hp (18 kw)

Hydraulic System

Relief Valve Pressure

2250 psi

MAST

Lift Speed	93 ft/min (28 m/min)
Load Capacity	6499.3 lbs (2,948 kg)
Load Center	24.1 in (61 cm)
Lower Speed	91 ft/min (28 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	5 degrees

Operating Specifications

Auxiliary hydraulic flow	10.6 gpm (40 lpm)
Axle load - front	4640.8 lbs (2,105 kg)
Axle load - rear	6852 lbs (3,108 kg)
Drawbar Pull	3335 lbs (1,513 kg)
Front Tire Size	21 x 8 x 15
Max Speed	10.6 mph (17 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Voltage	36 volts
Rear Tire Size	16 x 6 x 10.5
Tire Type	Cushion

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon