All Equipment Category Specs ↠ Forklifts ↠ Hyster H40FTS

Hyster H40FTS Forklift

Category: Forklifts (See all Forklifts for sale)
Manufacturer: Hyster (See all Hyster Equipment for sale)
Model: H40FTS (See all Hyster H40FTS for sale)

Dimensions

Gradeability	24%
Ground Clearance	5.8 in (15 cm)
Height to Top of Overhead Guard	7.1 ft (2 m)
Length to Fork Face	7.5 ft (2 m)
Max Fork Height	10.7 ft (3 m)
Overall Height - mast lowered	7 ft (2 m)
Overall Width	3.6 ft (1 m)
Right Angle Stack	7.8 ft (2 m)
Turning Radius	6.6 ft (2 m)
Wheelbase	4.6 ft (1 m)

Engine

Displacement	121.9 cu in (0 cu m)
Engine Model	PSI 2.0L
Fuel Type	LPG
Number of Cylinders	4
Power	44 hp (33 kw)
Torque	100 lbs ft
Torque Measured @	1300 rpm

MAST

Lift Speed	118 ft/min (36 m/min)
Load Capacity	4000 lbs (1,814 kg)
Load Center	24.1 in (61 cm)
Lower Speed	92 ft/min (28 m/min)
Mast Tip Forward	6 degrees
Mast Tip Rear	6 degrees
Max Fork Spread	37.6 in (96 cm)

Operating Specifications

Axle load - front	2750 lbs (1,247 kg)
Axle load - rear	4134 lbs (1,875 kg)
Drawbar Pull	2546 lbs (1,155 kg)
Front Tire Size	6.50 x 10 - 10
Max Speed	13.4 mph (22 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Voltage	12 volts
Operating Weight	6884 lbs (3,123 kg)
Rear Tire Size	5.00 x 8.00
Tire Type	Pneumatic

Transmission

Number of Forward / Reverse Speeds

1-1

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon