All Equipment Category Specs ↠ Forklifts ↠ Hyster J70XN

Hyster J70XN Forklift

Category: Forklifts (See all Forklifts for sale)
Manufacturer: Hyster (See all Hyster Equipment for sale)
Model: J70XN (See all Hyster J70XN for sale)

Brakes

Parking brake	Mechanical
Service brake	Hydraulic

Dimensions

Front Tread Range	37 in (94 cm)
Gradeability	32%
Ground Clearance	3.9 in (10 cm)
Height to Top of Overhead Guard	7.2 ft (2 m)
Length to Fork Face	8.4 ft (3 m)
Overall Height - mast lowered	7.2 ft (2 m)
Overall Width	4 ft (1 m)
Rear Tread Range	39.1 in (99 cm)
Right Angle Stack	12.5 ft (4 m)
Turning Radius	7.1 ft (2 m)
Wheelbase	5.8 ft (2 m)

Engine

Engine Make	Hyster
Engine Model	J70XN

Hydraulic System

Relief Valve Pressure

2250 psi

MAST

Lift Speed	116 ft/min (35 m/min)
Load Capacity	6999.7 lbs (3,175 kg)
Load Center	24.1 in (61 cm)
Lower Speed	91 ft/min (28 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	5 degrees

Operating Specifications

Auxiliary hydraulic flow	10.6 gpm (40 lpm)
Axle load - front	6177.4 lbs (2,802 kg)
Axle load - rear	6744 lbs (3,059 kg)
Drawbar Pull	4243 lbs (1,925 kg)
Front Tire Size	23 x 10 - 12
Max Speed	11.2 mph (18 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Voltage	80 volts
Operating Weight	8000.6 lbs (3,629 kg)
Rear Tire Size	18 x 7 - 8
Tire Type	Pneumatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon