All Equipment Category Specs ↠ Forklifts ↠ Hyster S40FTS

Hyster S40FTS Forklift

Category: Forklifts (See all Forklifts for sale)
Manufacturer: Hyster (See all Hyster Equipment for sale)
Model: S40FTS (See all Hyster S40FTS for sale)

Dimensions

Gradeability	29%
Ground Clearance	4.3 in (11 cm)
Height to Top of Overhead Guard	6.9 ft (2 m)
Length to Fork Face	7.1 ft (2 m)
Max Fork Height	10.7 ft (3 m)
Overall Height - mast lowered	6.9 ft (2 m)
Overall Width	3.3 ft (1 m)
Right Angle Stack	7.3 ft (2 m)
Turning Radius	6.6 ft (2 m)
Wheelbase	4.6 ft (1 m)

Engine

Displacement	122 cu in (0 cu m)
Engine Model	PSI 2.0L
Fuel Type	LP/Gas
Number of Cylinders	4
Power	44 hp (33 kw)
Power Measured @	2400 rpm
Torque	100 lbs ft
Torque Measured @	1300 rpm

MAST

Lift Speed	112 ft/min (34 m/min)
Load Capacity	4000 lbs (1,814 kg)
Load Center	24 in (61 cm)
Lower Speed	93 ft/min (28 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	5 degrees
Max Fork Spread	33.5 in (85 cm)

Operating Specifications

Axle load - front	2624 lbs (1,190 kg)
Axle load - rear	4347 lbs (1,972 kg)
Front Tire Size	18 X 7 X 12.125
Fuel Capacity	10.2 gal (39 l)
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	8.3 gal (31 l)
Max Speed	10.7 mph (17 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	6971.1 lbs (3,162 kg)
Rear Tire Size	15 X 5 X 11.25
Tire Type	Cushion

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon