TOLEDO, OH (AP) Cracks found in some of the steel being examined by engineers did not cause last month’s deadly construction crane collapse, an expert said.

A 1,000-ton (907 t) crane collapsed Feb. 16 while putting together the roadway on a new Interstate 280 bridge. Four workers were killed and four injured. The crane stretched above the bridge’s pillars and lifted concrete sections of the roadway into place.

Investigators sent large pieces of the wreckage to a laboratory at Lehigh University in Bethlehem, PA, which specializes in testing the integrity of steel structures. The lab is trying to determine if a failure in the steel itself caused the collapse or if the steel broke after the collapse was under way.

John Fisher, an engineering professor at Lehigh, said engineers have determined that fractures discovered in steel parts at the top of the crane were not the cause of the accident.

However, Fisher said the finding does not mean that steel failure has been totally ruled out. He said several more samples of the steel will be studied.

The northbound lanes of I-280 reopened on Mar. 12 approximately two hours after the last piece of wreckage was removed. The southbound lanes of I-280 reopened three days after the collapse.

Today's top stories

Fay Preps Way for Pittsburgh International Airport Modernization Project

Volvo CE Continues to Perform, Transform During Slower Q1 2024

American Bridge Co. Leads Conn.'s East Haddam Swing Bridge Project

Growing Interest in Construction Careers Among Younger People Means Jobs Filled, Deadlines Met

Pettibone Celebrates 75th Anniversary of Cary-Lift

Common Ground Alliance Hosts Conference & Expo in Colorado On Preventing Utility Damages

Powerco Hosts Mecalac Road Show Event in Clinton, N.J.

Site Prep Inc. of NC Adds Milling Services to Its Existing Highway Infrastructure Capabilities