List Your Equipment  /  Dealer Login

ICON Introduces New, Larger AG-13 Scraper

ICON Industries has made high-capacity earthmoving available to the agricultural market.

Fri January 16, 2015 - National Edition
ICON Industries


ICON Industries has made high-capacity earthmoving, along with the company’s best industrial features, available to the agricultural market — this time in an even larger size.

“Like the AG-11, which was introduced approximately three years ago, the new AG-13 is ideal for the producer whose needs exceed that of box scraper or carryall, but are below that of an industrial scraper,” said Jamie Meier, ag manager of Landoll Corporation. “However, with a heaped capacity of 13 yards, the AG-13 provides additional capacity to move even more material in a short amount of time. Like the AG-11, and many of the ICON industrial models, the AG-13 features ICON’s swing wall that ensures smooth, clean and rapid ejection cycles.”

The front gate and eject wall also are finished in dirt-resisting epoxy to maintain efficiency in the stickiest of soils. Meanwhile, the double-wall frame sidewall design increases overall strength and rigidity, while protecting hydraulics.

“The AG-13 feature the same basic design as the AG-11, including a frame engineered around 80,000- and 100,000-tensile-strength steel for maximum durability and reliability,” Meier said. “We increased the height of the bowl sides to provide more capacity for ag customers with higher-horsepower tractors.”

The AG-13 also is like the AG-11 in that it utilizes a front dolly that not only improves maneuverability via 50 degrees of horizontal movement and 70 degrees of lateral movement, but helps support the load, allowing the use of an average-sized ag tractor. At the same time, the design of the dolly allows about six percent of the scraper weight to be transferred to the drawbar for extra traction when loading. Finally, the dolly provides extra lift on the front of the bowl to provide a full 22 in. (56 cm) of ground clearance during transport

“One change we did make on the AG-13, however, was to increase the size of the front wheels on the dolly,” Meier said, noting that the same change has since been implemented on the AG-11. “Now, both models utilize 500/70R x 24 tires for more support and better flotation.”

For more information, call 785/738-3547 or visit www.landoll.com.




Today's top stories

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

Volvo CE Continues to Perform, Transform During Slower Q1 2024

American Bridge Co. Leads Conn.'s East Haddam Swing Bridge Project

Pettibone Celebrates 75th Anniversary of Cary-Lift

Common Ground Alliance Hosts Conference & Expo in Colorado On Preventing Utility Damages

Going Beyond Diversity: Star Equipment's Rental Advantage

Volvo CE Launches Updated L30, L35 Compact Wheel Loaders


 






aggregateequipmentguide-logo agriculturalequipmentguide-logo craneequipmentguide-logo forestryequipmentguide-logo truckandtrailerguide-logo
39.96250 \\ -83.00610 \\ Columbus \\ PA