Designed for use in any terrain, the stackers, ranging from 60 to 150 ft. (18 to 45.7 m), are easily moved site to site without the need to remove the wheels for transport.

McCloskey has taken the next big step in its designs by adding the new all-terrain stackers to its line-up. Blending the benefits of onsite track mobility with the high productivity of a radial conveyor, the all-terrain stackers allow the conveyor to switch from track mode to radial in seconds, according to the manufacturer.

Designed for use in any terrain, the stackers, ranging from 60 to 150 ft. (18 to 45.7 m), are easily moved site to site without the need to remove the wheels for transport. Built-in levelling indicators allow operators to position the stacker regardless of the ground evenness, with independent hydraulic jack legs to stabilize once in place.

Historically, tracked radial stackers offered on the market have been focused on a track bogie under the hopper. While this allows mobility, it also creates an obstacle for the stacker during operation with buildup and spillage of material blocking the tracks. The configuration raises the height of the stacker such that additional transfer conveyors are often required. The McCloskey design eliminates the need for any additional equipment, delivering a clean radius without material buildup, according to the manufacturer.

The stackers feature a unique rear counterweight that counter balances the tracks and wheels, which are behind the stacker's center of gravity. The design enables a much higher stockpile capacity, with the radial wheels set well back. The rear counterweight also firmly anchors the tail end during radial mode, delivering greater stability to the stacker while in operation.

The McCloskey All-Terrain Stackers standard features include:

• Tires that have aggressive-tread patterns for more traction in tough terrain
• Hydraulic raise/lower arm allows the conveyor to switch from track to radial mode in seconds
• Level gauge to allow for operation on uneven ground
• Internal wheel drive motors allow radial travel
• Counterweight design delivers enhanced stability and safety in operation.

McCloskey radial track stackers are more easily transported than other products on the market, and the track bogie features radial rubber tires with a planetary gear box to drive the wheels. This limits them to being pit portable, as road transport becomes difficult. The McCloskey design allows for the wheels to be folded for transport, delivering true portability for operators moving from site to site, according to the manufacturer.

“Helping customers achieve greater production levels is what drives us to design and manufacture innovative products,” said Paschal McCloskey, president and CEO of McCloskey International. “This patent pending design evolved from watching and listening to the customers' challenges when stockpiling material in a variety of conditions and locations. We will continue look at developing new products to meet these unique challenges around the globe.”

For more information, visit www. Mccloskeyinternational.com.

Today's top stories

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

Volvo CE Continues to Perform, Transform During Slower Q1 2024

American Bridge Co. Leads Conn.'s East Haddam Swing Bridge Project

Pettibone Celebrates 75th Anniversary of Cary-Lift

Common Ground Alliance Hosts Conference & Expo in Colorado On Preventing Utility Damages

Going Beyond Diversity: Star Equipment's Rental Advantage

Volvo CE Launches Updated L30, L35 Compact Wheel Loaders