Featuring Venturi-style suction and manual or automatic purge control, the pneumatic dust collector removes dust from the air as the operator drills.

The Minnich Manufacturing dust collection system meets the requirements for dowel pin drills found in Table 1 of the Occupational Safety and Health Administration (OSHA) final respirable crystalline silica standard when used with an appropriate filter. Filters supplied with the Minnich dust collection system comply with the OSHA filter efficiency requirement.

Featuring Venturi-style suction and manual or automatic purge control, the pneumatic dust collector removes dust from the air as the operator drills. The canister-style unit can be retrofitted to any Minnich on-grade, on-slab, machine-mounted or utility drill model. It also can be adapted to fit other dowel pin drill makes and models.

The dust collection system requires 40 scfm for hydraulically powered drills and 50 scfm for pneumatically powered units, and 60 to 110 psi. Each canister can accommodate up to two drills and offers a 60-square-meter filter area. The system comes with drill rod guide collection boots, a 5-gallon pail-type hopper and up to 20 ft. of vacuum hose per drill.

For more information, visit www.minnich-mfg.com.

Today's top stories

New Bridges Part of Iowa's $114M Madison Avenue Project

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

SAKAI Achieves Record Sales, Production

Takeuchi Recognizes Top Dealers at 2024 Dealer Summit

Muddy Water Dredging Christens Marlin Class Dredge

Indiana Officials Mark Start of 2024 Construction Season, Promote Safety

Leica Geosystems Launches its First Machine Smart Antenna — Leica iCON gps 120