Performance Enhanced on WA250PZ-6

Wed April 02, 2008 - National Edition
CEG



Komatsu America Corp.’s WA250PZ-6 tool carrier features improved visibility and increased loading power and performance for the construction, utility, government, sewer, waste and agricultural markets. Replacing the WA250PT-5, this machine includes significant technological enhancements for greater performance, operator comfort and efficiency, according to the manufacturer.

The WA250PZ-6, with an operating weight of 26,808 to 27,778 lbs. (12,160 to 12,600 kg) and a heaped bucket capacity of 2.5 to 3.0 cu. yd. (1.9 to 2.3 cu m), gets its power and productivity from a Komatsu SAA6D107E-1 engine. This engine has a net horsepower of 138 hp (103 kW), is EPA Tier III emissions certified and provides high productivity with low fuel consumption and low noise.

The WA250-6 is equipped with the latest Komtrax technology, which sends machine operating information to a secure Web site utilizing wireless technology. Data such as operating hours, location and maintenance alerts are relayed to the web application for analysis.

The Komtrax fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor and provides a wealth of other information to drive business efficiency and productivity, according to the manufacturer.

Parallel Linkage Design

The WA250PZ-6 offers a new parallel linkage design, which improves visibility for operations such as loading pallets and other materials onto forks.

The WA250PZ-6 also provides parallel movement with large tilt force for both bucket and fork applications.

Hydrostatic

Transmission System

The WA250PZ-6 incorporates Komatsu’s Hydrostatic Transmission System (HST) that allocates only as much power as is needed for a given application. The engine power is transmitted hydraulically to a transfer case, then mechanically out to the differentials and to the four driving wheels, making the WA250PZ-6 a very powerful yet efficient machine that responds quickly and smoothly to varying job conditions.

By adjusting automatically to the tractive effort demands of the work at hand, Komatsu’s HST provides for quick travel response and aggressive drive into the pile. The full auto-shifting feature eliminates gear shifting and the kick-down switch gives the operator the ability to concentrate on digging and loading operations for faster cycle times and increased productivity.

Variable Traction Control With ’S-mode’

The tractive effort of the machine, when traveling at low speeds, can be reduced by using the traction control switch to control tire slippage. This is especially beneficial for surfaces such as wet concrete or soft ground where tires are more likely to slip.

The traction control system eliminates excessive bucket penetration and tire slippage during operations such as stockpile loading, extending the life-cycle of tires and improving work efficiency.

A new “S-mode” control provides optimum driving force for operations on slippery road surfaces, including snow removal or working on snow-covered surfaces, by controlling the engine speed and HST motor when traveling at a low speed.

Breakout Force, Dumping Clearance and Reach

The WA250PZ-6 also has a breakout force of 26,490 lbs. (12,016 kg) and high static tipping loads (20,767 lbs. [9,420 kg] straight and 18,067 lbs. [8,195 kg] at a 40 degrees full turn) to provide power and stability during the toughest operations. The long lift arms provide high dumping clearances and maximum dumping reach so the operator can easily “level” or “even” loads on the body of a dump truck.

Improved Operator Comfort

Komatsu designed an operator-friendly cab with increased backwards seat slide adjustment and more interior room. The pressurized cab reduces noise levels to a low 70 d[B]A and keeps dust and other particles from the cab’s interior.

The rear-hinged cab doors and sloped staircase type steps with large diameter handrails allow for easy entrance and exit and a wide pillar-less glass windshield provides for maximum visibility. The viscous damping mount system helps to minimize noise, shock and vibration in rough working conditions.

For optimum comfort, the WA250PZ-6 features a low effort, multi-function mono lever pressure proportional control (PPC) hydraulic system with a forward, neutral and reverse control switch for smooth and easy directional changes. There also is a max traction switch on the mono lever to cut traction control on and off easily with the push of a button.

Easy Maintenance, Serviceability

The WA250PZ-6 allows for easy maintenance in order to reduce costly downtime. The large gull-wing type doors open widely and easily (with the assistance of a gas spring) allowing the operator or technician to perform daily service checks from the ground. The engine fan is hydraulically driven and if the machine is operating in adverse conditions the operator can reverse the hydraulic cooling fan (to blowout debris) from inside the cab by simply pressing a button on the control panel, or the fan can be preset to automatically activate at given intervals.

The tool carrier is equipped with the Komatsu Equipment Management Monitoring System (EMMS), which monitors all critical systems and alerting and guiding the operator should an abnormality occur.

The controller monitors key engine features such as oil pressure, coolant temperature, air cleaner clogging, etc. If the controller finds abnormalities the error is displayed on the LCD.

The EMMS also stores abnormalities and error codes for troubleshooting assistance to mechanics which minimizes diagnosis and repair time.

For more information, visit www.komatsuamerica.com.