SSC First in Arizona to Use SBU Trenchless Technology

Sun March 16, 2008 - West Edition
CEG



Specialized Services Company (SSC) now offers SBU (Small Boring Unit) technology as part of its extensive suite of trenchless services.

SBU cuts through hard rock, cemented cobbles, caliche and river run in small diameter drives. Although SBUs have been in use for more than 10 years on hundreds of projects around the world, SSC is the first to offer this technology in Arizona.

Using a small diameter cutter head and thrust bearing assembly from 24 to 72 in. (60 to 180 cm), SBU extends the capabilities of the standard auger boring machine and is typically used on underground utility installations, such as gravity sewers, that are between 100 and 300 ft. (30.5 to 91 m) in length.

The machine has been used on drives more than 500 ft. (152 m).

Just recently SSC utilized a 24-in. diameter SBU-A with mixed ground cutter head to excavate two crossings in North Phoenix measuring 240 and 365 ft. (73 and 111 m) in length. Ground conditions consisted of cemented cobbles and boulders. The cutter head was mounted with widely-spaced disc cutters and larger muck openings to accommodate the ground conditions.

“Before we used the SBU, we hand-dug these types of jobs,” explained Arvid Veidmark III, co-owner and senior estimator.

“We would push steel casing into the ground and then excavate using jack hammers and buckets. Our typical rates were 5 to 7 ft a day. The mixed ground cutter head, by contrast, averaged 20 to 30 ft per 8-hour shift saving us all a lot of time and money.

“It’s really amazing this technology hasn’t been used here before,” said Veidmark. “With all of the challenging soil types we encounter here in Arizona, the SBU will most certainly eliminate the need for hand tunneling on many projects, a very costly and arduous process.”

Based in Phoenix, Ariz., Specialized Services Company is a provider of trenchless boring, drilling and vacuum excavation services.

For more information, visit www.sscboring.com.