The new Terex Pegson 650 HA Premiertrak uses an M Series single-toggle jaw crusher with hydraulic setting adjustment.

The feed opening is 26 by 44 in. (66 by 112 cm).

The vibrating grizzly feeder is 14 by 3.6 ft. (4.3 by 1.1 m).

The 15 by 8 ft. (4.6 by 2.4 m) hydraulic folding feed hopper has up to 13 cu. yd. (9.9 cu m) gross capacity, depending on method of feed.

The 3.4 ft. (1.02 m) wide on-plant product conveyor has a discharge height of 10.9 ft. (3.3 m) and hydraulic raise/lower tail section.

Canvas removable dust covers are fitted at the head and beyond the magnet area.

Polyurethane belt-scraper blades are standard.

The 24 in. (61 cm) wide on-plant dirt/side conveyor has a discharge height of approximately 7 ft. (2.1 m).

Standard equipment includes a suspended, self-cleaning, overband magnetic separator; dust-suppression sprays; heavy-duty tracks; and a six-cylinder Cat C-9 diesel engine.

Optional equipment includes mild steel feed hopper liner plates, heavy-duty four-ply product belt, single idler belt weigher fitted to the main product conveyor, plant-mounted hydraulic pick breaker, camera mounted over the crusher mouth with screen in the operator’s cabin, and a hydraulic-driven water pump for pressurized water to the dust-suppression sprays.

For more information, call 502/736-5200 or visit www.blpegson.com

This story also appears on Aggregate Equipment Guide.

Today's top stories

New Bridges Part of Iowa's $114M Madison Avenue Project

Eagle Bridge Co. Works On Final Leg of U.S. 35 Upgrade

Fay Preps Way for Pittsburgh International Airport Modernization Project

SAKAI Achieves Record Sales, Production

Takeuchi Recognizes Top Dealers at 2024 Dealer Summit

Muddy Water Dredging Christens Marlin Class Dredge

Indiana Officials Mark Start of 2024 Construction Season, Promote Safety

Leica Geosystems Launches its First Machine Smart Antenna — Leica iCON gps 120