Sell Your Equipment  /  Dealer Login  /  Create Account
This machine has been sold.

2018 Case TV380



MACHINE SOLD



Machine Info:

Hours:2397
Serial Number:JAFTV380JJM445062
Stock Number:2951002
Machine Location:DES MOINES, IA 50313

Description:

Cab Heat A/C Radio, Air ride seat, Two speed drive, E-H controls, Heavy duty front lights, Floor mat, Heavy duty rear door, Hydraulic coupler, Engine block heater, Front electric control circuit, 17.7" rubber track, 84" light material bucket, Operating load 3800 lbs, Tipping load 7600 lbs, Factory shipping weight 10550 lbs
Front Electric: FRONT ELECTRIC
Appearance Condition: GOOD
Mechanical Condition: GOOD
Cab Condition: GOOD
WarrantyExpireDate: E-WARRANTY
LiftCapacity: 3800

Machine Details:

Condition
Used
GaUGES, OPERATOR STATION, CONSOLE
heaterYes


Specs from the manufacturer:

Bucket
Breakout Force8,768 lbs (3,977 kg)
Bucket Width7 ft (2 m)
Capacities
Engine oil with filter2 gal (9 l)
Fuel Tank26 gal (97 l)
Dimensions
Dump Height with Foundry/ Excavating Bucket105 in (267 cm)
Ground Clearance10 in (24 cm)
Height - Top of Cab80 in (204 cm)
Height - Top of ROPS/FOPS80 in (204 cm)
Height to Hinge Pin132 in (334 cm)
Length - with Bucket12 ft (4 m)
Overall Length with Foundry/ Excavating Bucket142 in (360 cm)
Track Gauge0.1 ft in (0 cm)
Track Width76 in (193 cm)
Width Over Tracks6 ft (2 m)
Engine
Alternator160 A
AspirationTurbo
Battery12-volt low-maintenance
Bore4 in (10 cm)
Displacement207 cu in (0 m)
Emissions complianceTier 4 Final Certified (CEGR, DOC, SCR)
Engine ModelFPT F5B FL413 E B002
Gross Power90 hp (67 kw)
Net Power84 hp (63 kw)
Number of Cylinders4
Peak Torque282 lbs/ft
Power Measured @2,500 rpm
Radiator Core typeAluminum bar and plate
Starter4 hp (3 kw)
Stroke4 in (11 cm)
Hydraulic System
Main relief pressure31 psi
Pump Flow24 gal/min (92 l/min)
Pump TypeGear
Loader
Breakout Force8,776 lbs (3,981 kg)
Bucket Rollback at Max Height86 °
Dump Clearance at Full Height Discharge105 in (267 cm)
Dump Reach32 in (80 cm)
High flow pump output38 gal/min (142 l/min)
Linkage GeometryVertical
Operating Load3,800 lbs (1,724 kg)
Operating Load Rating2,660 lbs (1,207 kg)
Operating Width 76 in (193 cm)
Rollback - Ground Level34.2 °
Standard hydraulic pump output24 gal/min (92 l/min)
Straight Tipping Load7,599 lbs (3,447 kg)
Tipping Angle7600 °
Operating Specifications
Lift ConfigurationVertical
Operating Weight10,000 lbs (4,536 kg)

Dealer Contact Info:

Titan Machinery Inc

Fax: 515-964-2146

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo