2014 Case 1650M For Sale in Mills River, NC



For Sale: $138,000.00 USD

This machine is available to rent.



Machine Info:

Hours:3366
Stock Number:DO1359
Machine Location:MILLS RIVER NC, 28759

Description:

Enclosed Cab, Heat, A/C LGP Dozer. PAT Blade, Trimble Ready, Extended Life U/C, Drawbar,3RD Spool Valve and Control, Rear screen and sweeps, turbine pre-cleaner. Telematics, Extended Warranty included. Excellent Condition. With root rake.


Machine Details:

Condition
Used
Engine
horsepower150


Specs from the manufacturer:

Blades
Blade Capacity5 cu yds (4 m)
Blade Height52 in (132 cm)
Blade TypePAT
Blade Width13 ft in (33 cm)
Capacities
Engine oil with filter4 gal (17 l)
Dimensions
Blade depth below ground23 in (57 cm)
Blade lift above ground44 in (113 cm)
Cast reach16 in (41 cm)
Ground Clearance1 ft (0 m)
Height - Top of Cab115 in (292 cm)
Height - Top of ROPS/FOPS116 in (295 cm)
Length of Track on Ground0 ft (0 m)
Width Over Tracks8.2 ft in (21 cm)
Drive System
Final drive2 helical gear
Max drawbar pull61,193 lbs (27,757 kg)
Parking brakesHeavy-duty, spring-applied,
Electrical System
Alternator120 amp
Batteries2 V
Battery12-volt low-maintenance
Engine
Air intakeCross-Flow
Cooling systemLiquid
Diesel exhaust fluid (DEF) tank capacity14 gal (52 l)
Displacement409 cu in (0 m)
Emission Tier LevelInterim Tier 4
Engine ModelFPT F4HFE6132
Fan27.6 in,(700mm)Diameter
Fuel2 Diesel
Fuel injectionCommon rail
Fuel tank85 gal (322 l)
Gross Power164 hp (122 kw)
Net Power150 hp (112 kw)
Number of Cylinders6
Power Measured @2,000 rpm
Pump operating angles - Fore and aft45 °
Pump operating angles -Side-to-side35 °
Transmission TypeHydrostatic
Hydraulic System
Lift cylinder - Rod diameter3 in (6 cm)
Lift cylinder - Stroke17 in (43 cm)
Lift cylinder(s)2
Lift cylinder-Bore diameter5 in (11 cm)
Pump typeVariable Displacement Piston
Operating Specifications
center rock guard417 lbs (189 kg)
Long track37,750 lbs (17,123 kg)
Low ground pressure39,551 lbs (17,940 kg)
Operating Weight39,551 lbs (17,940 kg)
Sweeps139 lbs (63 kg)
Winch2,397 lbs (1,087 kg)
Performance
Pump Flow35 gal/min (132 l/min)
Transmission
Max Speed - Forward6 mph (9 kph)
Max Speed - Reverse6 mph (9 kph)
Undercarriage
Number of bottom rollers per side8
Number of Shoes per Side45
Number of Upper Rollers2
Track Gauge0 ft (0 m)
Width of Shoes34 in (87 cm)
Weights
counterweight417 lbs (189 kg)
Ripper weight2,987 lbs (1,355 kg)

Dealer Contact Info:

Hills Machinery

Fax: 919-746-7939

Click for Phone Number