# 2022 Case CX160D for Sale in Marshall, MN

**URL:** <https://www.constructionequipmentguide.com/used-equipment/case/excavators/cx160d/id/88703218>

## Listing details

- **Price:** $132,900.00 USD
- **Listing ID:** 88703218
- **Year:** 2022
- **Manufacturer:** Case
- **Model:** CX160D
- **Category:** Excavators
- **Type:** Standard Excavators
- **Serial number:** DAC160K7NNS7F2060
- **Stock number:** E00671918
- **Location:** Marshall, MN

## Machine details

### General Specifications

- **hours:** 1390
- **airconditioning:** Yes
- **heater:** Yes
- **hydraux:** Yes
- **quickattach:** Yes
- **ropstype:** Enclosed
- **trackpercentremaining:** 75
- **patternchanger:** Yes
- **coupler:** Yes
- **longundercarriage:** Yes

## Manufacturer specifications

### Boom/Stick Excavator Option 1

- **Dig radius at ground line:** 349.3 in (887.22 cm)
- **Dump height:** 260.3 in (661.16 cm)
- **Max Digging Depth:** 19.2 ft (5.85 m)
- **Max Digging Reach on Ground:** 26.1 ft (7.96 m)
- **Max Reach Along Ground:** 30.4 ft (9.27 m)
- **Max Vertical Wall Digging Depth:** 16.7 ft (5.09 m)
- **Max.Dumping Height:** 21 ft (6.4 m)
- **Minimum swing radius:** 117.8 in (299.21 cm)
- **Mximum dig radius:** 370.1 in (940.05 cm)

### Boom/Stick Excavator Option 2

- **Dig radius at ground line:** 363 in (922.02 cm)
- **Dump height:** 263.4 in (669.04 cm)
- **Max Digging Depth:** 21.3 ft (6.49 m)
- **Max Vertical Wall Digging Depth:** 17.2 ft (5.24 m)
- **Maximum dig radius:** 369.3 in (938.02 cm)
- **Maximum reach height:** 365.8 in (929.13 cm)
- **Minimum swing radius:** 120.1 in (305.05 cm)

### Boom/Stick Excavator Option 3

- **Overall height:** 9.8 ft (2.99 m)

### Brakes

- **Brakes Type:** Dual stage relief or counter balance design
- **Service brake:** Mechanical disc
- **Travel control:** SAHR disc - each motor

### Capacities

- **Cooling system:** 4.3 gal (16.28 l)
- **Engine oil w/ filter change:** 4.5 gal (17.03 l)
- **Final Drive:** 1.6 gal (6.06 l)
- **Fuel Tank:** 79.3 gal (300.15 l)
- **Hydraulic system:** 43.6 gal (165.03 l)
- **Hydraulic Tank:** 23.8 gal (90.08 l)
- **Swing drive:** 1.4 gal (5.3 l)

### Dimensions

- **Boom length:** 0.1 ft (0.03 m)
- **Cab height:** 117 in (297.18 cm)
- **Center to center - idler to sprocket:** 10.5 ft (3.2 m)
- **Ground Clearance:** 1.4 ft (0.43 m)
- **Ground pressure:** 5.9 psi
- **Overall height:** 9.8 ft (2.99 m)
- **Tail Swing Radius:** 8.2 ft (2.5 m)
- **Track length:** 157.1 in (399.03 cm)
- **Track shoe width:** 2 ft (0.61 m)

### Engine

- **Air filter type:** Dry type element with warning restriction indicator
- **Bore:** 3.8 in (9.65 cm)
- **Displacement:** 183.1 cu in (3000.48 cu cm)
- **Emission Tier Level:** Tier 4
- **Engine Make:** Isuzu
- **Engine Model:** Isuzu 4 JJ 1X
- **Fuel Filter:** Replaceable full flow spin-on cartridge
- **Fuel injection:** Direct injection - electronic
- **Fuel Type:** Requires ultra-low sulfur fuel B5 biodiesel tolerant
- **Horsepower per SAE J1349 Net:** 112 hp (83.52 kw)
- **Max Torque:** 257.5 lbs ft (349.12 nm)
- **Net Power:** 112 hp (83.52 kw)
- **Oil Filter:** Replaceable full flow spin-on cartridge
- **Power Measured @:** 2200 rpm
- **Stroke:** 4.1 in (10.41 cm)

### Hydraulic System

- **Main pump - Maximum flow:** 37.6 gal (142.32 l)
- **System relief pressure:** 4970 psi

### Operating Specifications

- **Arm Breakout Force:** 14837.4 lbs (6730.14 kg)
- **Arm size:** 8.2 ft (2.5 m)
- **Operating Weight:** 38360.5 lbs (17400.05 kg)

### Performance

- **Lift over end 10' radius:** 17200.5 lbs (7802.03 kg)
- **Lift over end Max. reach:** 3849.3 lbs (1746.02 kg)
- **Lift over side 10' radius:** 16250.3 lbs (7371.02 kg)
- **Lift over side Max. reach:** 14572.6 lbs (6610.03 kg)

### Swing Mechanism

- **Swing Speed:** 11.5 rpm

### Transmission

- **Max Speed:** 3.4 mph (5.47 kph)

### Undercarriage

- **Track Shoe Width:** 23.7 in (60.2 cm)

## About this model

The Case CX160D is a hydraulic excavator in Case Construction Equipment's CX-D series. It is a mid-size machine used for general excavation, site preparation, trenching, utility work, grading, and material handling. The CX160D is typically configured with a diesel engine, hydraulic system, boom and arm options, and a standard excavator undercarriage for tracked mobility and stability. Common attachments may include buckets, hydraulic thumbs, and breakers. The model is designed for construction, civil works, and utility applications where digging depth, reach, and controlled hydraulic performance are required. Availability of specifications may vary by market and configuration.

## Photos

![2022 Case CX160D](https://s3.amazonaws.com/equipment.ceg/noimage.jpg)