# 2019 Case CX160D for Sale in Rogers, MN

**URL:** <https://www.constructionequipmentguide.com/used-equipment/case/excavators/cx160d/id/89295105>

## Listing details

- **Price:** $82,622.00 USD
- **Listing ID:** 89295105
- **Year:** 2019
- **Manufacturer:** Case
- **Model:** CX160D
- **Category:** Excavators
- **Type:** Standard Excavators
- **Serial number:** NKS7F1688
- **Stock number:** E00682244
- **Location:** Rogers, MN

## Machine details

### General Specifications

- **hours:** 4101.8
- **airconditioning:** Yes
- **heater:** Yes
- **hydraux:** Yes
- **quickattach:** Yes
- **ropstype:** Enclosed
- **thumb:** Yes
- **thumbtype:** Hydraulic
- **trackpercentremaining:** 50
- **patternchanger:** Yes
- **coupler:** Yes
- **armlength:** 118
- **armlengthUnit:** inch
- **longundercarriage:** Yes

## Manufacturer specifications

### Boom/Stick 1

- **Boom/Stick 1:** 8 ft 7 in (2.62 m) Arm
- **Dig Radius At Ground Line:** 349.22 in (887.02 cm)
- **Dump Height:** 260.24 in (661.01 cm)
- **Max Digging Depth:** 19.11 ft (5.82 m)
- **Max Digging Reach On Ground:** 26.1 ft (7.96 m)
- **Max Vertical Wall Digging Depth:** 16.67 ft (5.08 m)
- **Max.Dumping Height:** 20.97 ft (6.39 m)
- **Minimum Swing Radius:** 117.72 in (299.01 cm)
- **Mximum Dig Radius:** 370.08 in (940 cm)

### Boom/Stick 2

- **Boom/Stick 2:** 10 ft 0 in (3.04 m) Arm
- **Dig Radius At Ground Line:** 363 in (922.02 cm)
- **Dump Height:** 263.39 in (669.01 cm)
- **Max Digging Depth:** 21.3 ft (6.49 m)
- **Max Vertical Wall Digging Depth:** 17.13 ft (5.22 m)
- **Maximum Dig Radius:** 369.3 in (938.02 cm)
- **Maximum Reach Height:** 365.75 in (929 cm)
- **Minimum Swing Radius:** 120.08 in (305 cm)

### Brakes

- **Brakes Type:** Dual stage relief or counter balance design
- **Service Brake:** Mechanical disc
- **Travel Control:** SAHR disc – each motor

### Capacities

- **Cooling System:** 4.3 gal (16.28 l)
- **Engine Oil W/ Filter Change:** 4.5 gal (17.03 l)
- **Final Drive:** 1.6 gal (6.06 l)
- **Fuel Tank:** 79.3 gal (300.15 l)
- **Hydraulic System:** 43.6 gal (165.03 l)
- **Hydraulic Tank:** 23.8 gal (90.08 l)
- **Swing Drive:** 1.4 gal (5.3 l)

### Dimensions

- **Boom Length:** 0.02 ft (0.01 m)
- **Cab Height:** 116.93 in (297 cm)
- **Center To Center – Idler To Sprocket:** 10.47 ft (3.19 m)
- **Ground Clearance:** 1.38 ft (0.42 m)
- **Ground Pressure:** 5.9 psi
- **Overall Height:** 9.72 ft (2.96 m)
- **Tail Swing Radius:** 8.11 ft (2.47 m)
- **Track Length:** 157.09 in (399.01 cm)
- **Track Shoe Width:** 1.97 ft (0.6 m)

### Engine

- **Air Filter Type:** Dry type element with warning restriction indicator
- **Bore:** 3.8 in (9.65 cm)
- **Displacement:** 183.1 cu in (3000.48 cu cm)
- **Emission Tier Level:** Tier 4
- **Engine Model:** Isuzu 4 JJ 1X
- **Fuel Filter:** Replaceable, full flow spin-on cartridge
- **Fuel Injection:** Direct injection – electronic
- **Fuel Type:** Requires ultra-low sulfur fuel B5 biodiesel tolerant
- **Horsepower Per Sae J1349 Net:** 112 hp (83.52 kw)
- **Max Torque:** 257.5 lbs ft (349.12 nm)
- **Net Power:** 112 hp (83.52 kw)
- **Number Of Cylinders:** 4
- **Oil Filter:** Replaceable, full flow spin-on cartridge
- **Power Measured @:** 2200 rpm
- **Stroke:** 4.1 in (10.41 cm)

### Hydraulic System

- **Main Pump - Maximum Flow:** 37.6 gpm (142.32 lpm)
- **System Relief Pressure:** 4970 psi

### Operational

- **Arm Breakout Force:** 14837.4 lbs (6730.14 kg)
- **Arm Size:** 8.2 ft (2.5 m)
- **Operating Weight:** 38360.5 lbs (17400.05 kg)

### Performance

- **Lift Over End 10\\' Radius - Lbs (Kg):** 17200.5 lbs (7802.03 kg)
- **Lift Over End Max. Reach:** 3849.3 lbs (1746.02 kg)
- **Lift Over Side 10\\' Radius:** 16250.3 lbs (7371.02 kg)
- **Lift Over Side Max. Reach:** 14572.6 lbs (6610.03 kg)

### Swing Mechanism

- **Swing Speed:** 11.5 rpm

### Transmission

- **Max Speed:** 3.4 mph (5.47 kph)

### Undercarriage

- **Track Shoe Width:** 23.63 in (60.02 cm)

## About this model

The Case CX160D is a mid-size hydraulic excavator in Case Construction Equipment's CX series. Designed for general excavation, trenching, site preparation, utility work, and material handling, it is commonly used on construction and infrastructure projects. The CX160D features a conventional upperstructure, tracked undercarriage, and a hydraulic system configured for digging and attachment operation. It is typically equipped with a diesel engine, enclosed cab, and operator controls suited to precision earthmoving. As an excavator in the 16-ton class, the CX160D is positioned for applications requiring a balance of digging depth, reach, stability, and transportability.

## Photos

![2019 Case CX160D](https://s3.amazonaws.com/equipment.ceg/noimage.jpg)