# 2024 Case 586H for Sale in Miami, FL

**URL:** <https://www.constructionequipmentguide.com/used-equipment/case/forklifts/586h/id/82166028>

## Listing details

- **Price:** $78,900.00 USD
- **Listing ID:** 82166028
- **Year:** 2024
- **Manufacturer:** Case
- **Model:** 586H
- **Category:** Forklifts
- **Type:** Rough Terrain Forklifts
- **Hours:** 1585
- **Stock number:** JJGN580HERC790010
- **Location:** Miami, FL

## Description

2024 CASE, 586H Lifts - Forklifts - Rough Terrain, Open ROPS, 4 Wheel Drive, 22' Mast, Load control, Deluxe Suspension seat \*\*\* Call for price \*\*\* The 2024 CASE 586H is a high-performance, rough-terrain forklift engineered for durability and reliability in demanding material-handling environments, including construction sites, lumber yards, and agricultural operations. It is specifically designed to navigate unpaved, uneven, and soft-ground surfaces where standard warehouse forklifts would struggle. Engine: FPT (Fiat Powertrain Technologies) 3.4L turbocharged diesel engine (Tier 4 Final), optimized for power and fuel efficiency. Operating Capacity: Rated lift capacity is 6,000 lbs (2,722 kg). Mast Versatility: Multiple mast configurations allow for lift heights generally ranging from 15 ft to 22 ft, depending on the carriage setup. Transmission: Heavy-duty powershift transmission, typically offering 4 speeds forward and 4 in reverse for precise maneuverability. Operating Weight: A

## Manufacturer specifications

### Capacities

- **Cooling System:** 4.6 gal (17.41 l)
- **Engine Oil W/ Filter Change:** 4.6 gal (17.41 l)
- **Front Axle:** 830 cu in (13601.29 cu cm)
- **Fuel Tank - Diesel:** 31 gal (117.34 l)
- **Rear Axle:** 1.5 gal (5.68 l)

### Dimensions

- **Ground Clearance:** 10.24 in (26.01 cm)
- **Height:** 10.5833 ft (3.23 m)
- **Length:** 16.1667 ft (4.93 m)
- **Max Fork Height:** 15 ft (4.57 m)
- **Overall Height - Mast Lowered:** 10.7 ft (3.26 m)
- **Overall Height, Rops Cab:** 104.14 in (264.52 cm)
- **Overall Length:** 16.2 ft (4.94 m)
- **Overall Width:** 6.95 ft (2.12 m)
- **Turning Radius:** 10.78 ft (3.29 m)
- **Weight:** 14337 lbs (6502.04 kg)
- **Wheelbase:** 6.99 ft (2.13 m)
- **Width:** 6.9167 ft (2.11 m)

### Drive Train

- **Transmission:** 4F-4R Power Shuttle Synchromesh Transmission manual gear shift fully synchronized
- **Transmission / Type:** Power Shuttle
- **Travel Speeds - 1st:** 15 mph (24.14 kph)

### Electrical System

- **Voltage:** 12 Volts V

### Engine

- **Alternator:** 120 amps
- **Battery:** 850 cold-cranking
- **Displacement:** 207.5 cu in (3400.32 cu cm)
- **Emission Tier Level:** Tier 4
- **Engine Model:** FPT F5HFL463D
- **Engine Peak Torque:** 233.1 lbs ft (316.04 nm)
- **Engine Speed - Rated Speed, Full Load:** 2200 rpm
- **Fuel:** Diesel
- **Fuel Injection:** Direct high pressure common rail
- **Horsepower - Gross:** 74 hp (55.18 kw)
- **Horsepower -Net:** 68 hp (50.71 kw)
- **Net Power:** 68 hp (50.71 kw)
- **Number Of Cylinders:** 4
- **Power:** 74 hp (55.18 kw)
- **Power Measured @:** 2200 rpm
- **Torque:** 233 lbs ft (315.9 nm)
- **Torque Measured @:** 1400 rpm

### Hydraulic System

- **Pump Flow:** 18 gpm (68.13 lpm)
- **Pump Flow Capacity:** 18 gpm (68.13 lpm)
- **Pump Type:** Gear pump

### Mast

- **Lift Height- Largest Mast:** 264.18 in (671.02 cm)
- **Lift Height-Smallest Mast:** 4570 in (11607.8 cm)
- **Load Capacity:** 6000.99 lbs (2722.01 kg)
- **Load Center:** 24 in (60.96 cm)
- **Mast Tip Forward:** 45 degrees
- **Mast Tip Rear:** 15 degrees

### Operational

- **Front Tire Size:** 19.5 L x 24
- **Operating Weight:** 13681.9 lbs (6206.01 kg)
- **Rear Tire Size:** 11 L x 16

## About this model

The Case 586H is a forklift model used for material handling in construction, agriculture, and industrial applications. It is designed to lift, transport, and place palletized or bulk loads in yards, warehouses, and job sites. The 586H is part of Case's equipment lineup and is typically associated with rough-terrain forklift use, where traction, stability, and load control are important. Common features may include a diesel engine, pneumatic tires, a mast assembly, and operator controls for lifting and tilting. Specifications can vary by configuration, year, and market. Always verify lift capacity, dimensions, and attachments with official Case documentation.

## Photos

![2024 Case 586H](https://cdn.cwsplatform.com/1428/images/e350328397030d5b456ca49da1d7ae40.jpg)

![2024 Case 586H photo 2](https://cdn.cwsplatform.com/1428/images/9ec94b0e68610c45a62a736cf561a3b2.jpg)

![2024 Case 586H photo 3](https://cdn.cwsplatform.com/1428/images/b4a006169063939d45152aa7b01d4ca7.jpg)

![2024 Case 586H photo 4](https://cdn.cwsplatform.com/1428/images/2bea472e5a65f20c2000156b072fefe1.jpg)

![2024 Case 586H photo 5](https://cdn.cwsplatform.com/1428/images/5bfc011a90d4ebfdec49afc0e1ec98ee.jpg)

![2024 Case 586H photo 6](https://cdn.cwsplatform.com/1428/images/325bbe8902a861d89df4a303cd63f41c.jpg)

![2024 Case 586H photo 7](https://cdn.cwsplatform.com/1428/images/40e7d25c878cb7071e6367080e50a17c.jpg)

![2024 Case 586H photo 8](https://cdn.cwsplatform.com/1428/images/9c4b0ff1b6eb1ef4144aad4145d478e2.jpg)
