# 2018 Case 586H for Sale in Miami, FL **URL:** ## Listing details - **Price:** Call for price - **Listing ID:** 88695951 - **Year:** 2018 - **Manufacturer:** Case - **Model:** 586H - **Category:** Forklifts - **Type:** Rough Terrain Forklifts - **Hours:** 6148 - **Stock number:** JJGN580HPJC749207 - **Location:** Miami, FL ## Description 2018 CASE, 586H Lifts - Forklifts - Rough Terrain, 4 Wheel Drive \*\*\* Call for Price \*\*\* The Case 586H (2018 model year) is a rugged, rough-terrain forklift designed for demanding material handling applications on construction sites, lumber yards, and agricultural operations. Built to handle uneven ground and outdoor surfaces, the H-Series is known for its stability and heavy-duty mast options Engine: FPT (Fiat Powertrain Technologies) 3.4L turbocharged diesel engine. Net Power: Approximately 74 hp (55 kW). Lifting Capacity: Typically rated for 6,000 lbs (2,722 kg). Transmission: Powershift transmission with 4 speeds forward and 4 reverse. Lift Height: Various mast options are available, typically ranging from 15 ft to 22 ft, depending on the chosen carriage configuration. Operating Weight: Approximately 13,000–15,000 lbs, depending on the mast and tire setup Rough-Terrain Capability: Designed with high ground clearance, a heavy-duty frame, and wide-set tires to maintain traction and stability on dirt, gravel, and mud. Mast Versatility: The 586H supports various mast designs, allowing operators to choose the right balance of reach and lift capacity for their specific material handling needs. Operator Environment: Features an open-canopy design (or optional enclosed cab) with a focus on visibility to the forks and the load. Ergonomic controls are positioned to minimize fatigue during repetitive loading cycles. Serviceability: Designed with a tilt-forward hood and grouped service points, making routine engine maintenance and fluid checks straightforward for fleet mechanics ## Manufacturer specifications ### Capacities - **Cooling System:** 4.6 gal (17.41 l) - **Engine Oil W/ Filter Change:** 4.6 gal (17.41 l) - **Front Axle:** 830 cu in (13601.29 cu cm) - **Fuel (since 2026):** 31 gal (117.34 l) - **Fuel Tank - Diesel:** 31 gal (117.34 l) - **Rear Axle:** 1.5 gal (5.68 l) ### Description - **Truck Sub-Type (since 2026):** Rough terrain ### Dimensions - **Ground Clearance:** 10.24 in (26.01 cm) - **Height:** 10.5833 ft (3.23 m) - **Height - Mast Extended (since 2026):** 302 in (767.08 cm) - **Height - Mast Lowered (since 2026):** 127 in (322.58 cm) - **Length:** 16.1667 ft (4.93 m) - **Lift Height (since 2026):** 264 in (670.56 cm) - **Mast Tilt - Backward (since 2026):** 15 - **Mast Tilt - Forward (since 2026):** 45 - **Max Fork Height:** 15 ft (4.57 m) - **Overall Height - Mast Lowered:** 10.7 ft (3.26 m) - **Overall Height, Rops Cab:** 104.14 in (264.52 cm) - **Overall Length:** 16.2 ft (4.94 m) - **Overall Length (since 2026):** 195 in (495.3 cm) - **Overall Width:** 6.95 ft (2.12 m) - **Overall Width (since 2026):** 84 in (213.36 cm) - **Turning Radius:** 10.78 ft (3.29 m) - **Turning Radius (since 2026):** 122.5 in (311.15 cm) - **Weight:** 14337 lbs (6503.16 kg) - **Wheelbase:** 6.99 ft (2.13 m) - **Width:** 6.9167 ft (2.11 m) ### Drive Train - **Transmission:** 4F-4R Power Shuttle Synchromesh Transmission manual gear shift fully synchronized - **Transmission / Type:** Power Shuttle - **Travel Speeds - 1st:** 15 mph (24.14 kph) ### Driveline - **Engine Output - Gross (since 2026):** 74 hp (55.18 kw) - **Service Brake Type (since 2026):** Wet Disc (Outboard Mounted) - Hydraulic ### Electrical System - **Voltage:** 12 Volts V ### Engine - **Alternator:** 120 amps - **Battery:** 850 cold-cranking - **Displacement:** 207.5 cu in (3400.32 cu cm) - **Emission Tier Level:** Tier 4 - **Engine Model:** FPT F5HFL463D - **Engine Peak Torque:** 233.1 lbs ft (316.04 nm) - **Engine Speed - Rated Speed, Full Load:** 2200 rpm - **Fuel:** Diesel - **Fuel Injection:** Direct high pressure common rail - **Horsepower - Gross:** 74 hp (55.18 kw) - **Horsepower -Net:** 68 hp (50.71 kw) - **Net Power:** 68 hp (50.71 kw) - **Number Of Cylinders:** 4 - **Power:** 74 hp (55.18 kw) - **Power Measured @:** 2200 rpm - **Torque:** 233 lbs ft (315.9 nm) - **Torque Measured @:** 1400 rpm ### Hydraulic System - **Pump Flow:** 18 gpm (68.13 lpm) - **Pump Flow Capacity:** 18 gpm (68.13 lpm) - **Pump Type:** Gear pump ### Mast - **Lift Height- Largest Mast:** 264.18 in (671.02 cm) - **Lift Height-Smallest Mast:** 4570 in (11607.8 cm) - **Load Capacity:** 6000.99 lbs (2722.01 kg) - **Load Center:** 24 in (60.96 cm) - **Mast Tip Forward:** 45 degrees - **Mast Tip Rear:** 15 degrees ### Operational - **Front Tire Size:** 19.5 L x 24 - **Operating Weight:** 13681.9 lbs (6206.01 kg) - **Rear Tire Size:** 11 L x 16 ### Performance - **Lifting Speed - Laden (since 2026):** 0.62 yd/s - **Load Capacity At Full Height (since 2026):** 1.5 ton - **Load Capacity At Full Height (since 2026):** 3000 lbs (1360.78 kg) - **Travel Speed - Unladen (since 2026):** 38.6 mph (62.12 kph) ### Weights - **Service Weight (since 2026):** 15061 lbs (6831.56 kg) ## About this model The Case 586H is a forklift model used for material handling in construction, agriculture, and industrial applications. It is designed to lift, transport, and place palletized or bulk loads in yards, warehouses, and job sites. The 586H is part of Case's equipment lineup and is typically associated with rough-terrain forklift use, where traction, stability, and load control are important. Common features may include a diesel engine, pneumatic tires, a mast assembly, and operator controls for lifting and tilting. Specifications can vary by configuration, year, and market. Always verify lift capacity, dimensions, and attachments with official Case documentation. ## Photos ![2018 Case 586H](https://cdn.cwsplatform.com/1428/images/4fc1b8bd7046545aff969c9282fff0f8.jpg) ![2018 Case 586H photo 2](https://cdn.cwsplatform.com/1428/images/40c6431ba23798294060d02b72184be4.jpg) ![2018 Case 586H photo 3](https://cdn.cwsplatform.com/1428/images/0723f62ca3147e2dd974dd87c318b647.jpg)