# 2014 Case SR250

**URL:** <https://www.constructionequipmentguide.com/used-equipment/case/skid-steer-loaders/sr250/id/88856199>

> This machine has been sold or is not currently for sale.

## Listing details

- **Price:** Sold
- **Listing ID:** 88856199
- **Year:** 2014
- **Manufacturer:** Case
- **Model:** SR250
- **Category:** Skid Steer Loaders
- **Type:** Skid Steer Loaders
- **Serial number:** NDM443261
- **Stock number:** E00674770
- **Location:** Torrington, WY

## Machine details

### General Specifications

- **hours:** 2884

## Manufacturer specifications

### Dimensions

- **Clearance at Max Lift and Dump:** 8.6 ft (2.62 m)
- **Ground Clearance:** 8 in (20.32 cm)
- **Height - Top of Cab:** 6.6 ft (2.01 m)
- **Length w/o Bucket:** 9.9 ft (3.02 m)
- **Length with Bucket:** 11.9 ft (3.63 m)
- **Reach at Max Lift and Dump:** 19.5 in (49.53 cm)
- **Turning Radius from Center - inc bucket:** 84.2 in (213.87 cm)
- **Turning Radius from Center - machine rear:** 70.4 in (178.82 cm)
- **Wheelbase:** 4.3 ft (1.31 m)
- **Width Over Tires:** 6 ft (1.83 m)

### Engine

- **Aspiration:** Turbocharged
- **Displacement:** 195 cu in (3195.48 cu cm)
- **Engine Model:** 432T/M3
- **Gross Power:** 84 hp (62.64 kw)
- **Max Torque:** 251 lbs ft (340.31 nm)
- **Number of Cylinders:** 4
- **Power Measured @:** 2500 rpm
- **Torque Measured @:** 1400 rpm

### Hydraulic System

- **Pump Flow Capacity:** 12.2 gpm (46.18 lpm)
- **Pump Type:** Gear
- **Relief Valve Pressure:** 3000 psi

### Loader

- **Bucket Capacity:** 0.7 cu yd (0.54 cu m)
- **Bucket Width:** 72 in (182.88 cm)
- **Operating Load Rating:** 2500 lbs (1133.98 kg)
- **Operating Width:** 70.28 in (178.51 cm)
- **Tipping Angle:** 5000 degrees

### Operating Specifications

- **Alternator Supplied Amperage:** 95 amps
- **Chain Box Fluid Capacity - each side:** 2 gal (7.57 l)
- **Engine Oil Fluid Capacity:** 2.7 gal (10.22 l)
- **Fuel Capacity:** 25.5 gal (96.52 l)
- **Hydraulic System Fluid Capacity:** 6 gal (22.71 l)
- **Max Speed:** 11.9 mph (19.15 kph)
- **Operating Speed:** 7.2 mph (11.59 kph)
- **Operating Voltage:** 12 volts
- **Operational Weight:** 7700 lbs (3492.67 kg)
- **Tire Size:** 12 x 16.5

## About this model

The Case SR250 is a skid steer loader designed for construction, landscaping, agriculture, and material handling applications. It is part of Case Construction Equipment's SR series and is known for its radial-lift design, which supports digging, grading, loading, and lifting tasks. The SR250 is commonly equipped with a diesel engine, hydraulic auxiliary flow for attachments, and a compact frame for maneuverability in confined work areas. Typical uses include site preparation, snow removal, pallet handling, and general earthmoving. As a skid steer loader, the Case SR250 is compatible with a wide range of buckets, forks, augers, and other work tools.

## Photos

![2014 Case SR250](https://s3.amazonaws.com/equipment.ceg/noimage.jpg)