# 2018 Caterpillar 415F2 for Sale in SALT LAKE CITY, UT **URL:** ## Listing details - **Price:** $65,020.00 USD - **Listing ID:** 88147884 - **Year:** 2018 - **Manufacturer:** Caterpillar - **Model:** 415F2 - **Category:** Backhoe Loaders - **Serial number:** CAT0415FLHWA00302 - **Stock number:** Z254237 - **Location:** SALT LAKE CITY, UT ## Description BACKHOE LOADER -, ROPS - AIR SUS SEAT - VINYL SEAT - SYN TRANS - DIFF LOC - 4WD - 12.5/80X18 FRT TIRES - 19.5-24 R-TIRES - EXT DIP - PILOT CTRL - REV PADS - 1.25 YD LDR BKT - BOE - RTD - RIDE CONTROL - F AUX HYD - TURBO - 24" BKT ## Machine details ### General Specifications - **Operators Station:** Pilot Controls - **Powertrain:** 4X4 - **Options:** Ride Control - **Arms:** Extendible Dipper - **Buckets:** 24" Bucket - **Tires:** 19.5 Tires ## Manufacturer specifications ### Axle Ratings - **Front Axle (2wd) - Dynamic:** 20233 lbs (9177.55 kg) - **Front Axle (2wd) - Static:** 50582 lbs (22943.64 kg) - **Front Axle (4wd) - Dynamic:** 20233 lbs (9177.55 kg) - **Front Axle (4wd) - Static:** 50582 lbs (22943.64 kg) - **Rear Axle - Dynamic:** 20233 lbs (9177.55 kg) - **Rear Axle - Static:** 50582 lbs (22943.64 kg) ### Backhoe - **Dig Depth - E-Stick Extended:** 17.9 ft (5.46 m) - **Dig Depth - Standard:** 14.3 ft (4.36 m) ### Brakes - **Feature (1):** Brakes meet the following standards: SAE J1473 and ISO 3450 requirements. - **Feature (2):** Self-adjusting, completely enclosed and sealed. - **Feature (3):** Foot operated brake pedals can be interlocked for roading. - **Feature (4):** Parking/secondary brakes are independent of the service brake system. - **Feature (5):** Parking brake is mechanically applied through an adjustable hand lever located on the right console. ### Dimensions - **Height:** 11.9167 ft (3.63 m) - **Length:** 23.5 ft (7.16 m) - **Weight:** 24251 lbs (11000.08 kg) - **Width:** 7.5833 ft (2.31 m) ### Engine - **Bore:** 3.9 in (9.91 cm) - **Displacement:** 207 cu in (3392.13 cu cm) - **Engine Model:** Cat C3.4B - **Gross Power - Iso 14396:** 74 hp (55.18 kw) - **Gross Power - Sae J1995:** 74 hp (55.18 kw) - **Net Peak Power - 1,800 Rpm - Eec 80/1269:** 73 hp (54.44 kw) - **Net Peak Power - 1,800 Rpm - Iso 9249:** 73 hp (54.44 kw) - **Net Peak Power - 1,800 Rpm - Sae J1349:** 72 hp (53.69 kw) - **Net Peak Torque - 1,400 Rpm:** 307 lbs ft (416.23 nm) - **Net Power - Sae J1349:** 68 hp (50.71 kw) - **Net Torque Rise - 1,400 Rpm - Sae J1349:** 88 lbs ft (119.31 nm) - **Note:** Engine meets U.S. EPA Tier 4 Final emission standards. - **Rated Net Power - 2,200 Rpm - Eec 80/1269:** 69 hp (51.45 kw) - **Rated Net Power - 2,200 Rpm - Iso 9249:** 68 hp (50.71 kw) - **Rated Net Power - 2,200 Rpm - Sae J1349:** 68 hp (50.71 kw) - **Rated Net Power - Iso 9249:** 68 hp (50.71 kw) - **Rated Net Power - Sae J1349:** 68 hp (50.71 kw) - **Stroke:** 4.4 in (11.18 cm) ### Engine Features - **Feature (1):** Regeneration is passive and does not require any input from the operator or disrupt work. - **Feature (10):** Direct injection fuel system provides accurate fuel delivery and efficiency. - **Feature (11):** Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator. - **Feature (12):** Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery. - **Feature (13):** Standard glow plug starting aid system for efficient cold weather starting. - **Feature (14):** High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise. - **Feature (15):** Higher low end torque for better engine/machine performance. - **Feature (16):** Engine is equipped with electric fuel priming pump. - **Feature (2):** Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity. - **Feature (3):** Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals. - **Feature (4):** Front and rear crankshaft oil seals are lip type Viton and PTFE designs featuring an integral dust lip. - **Feature (5):** For durability, inlet valves are nitrided, martensitic chrome silicon steel. - **Feature (6):** For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel. - **Feature (7):** Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life. - **Feature (8):** Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness. - **Feature (9):** Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow. ### General Specifications - **10) Maximum bucket rollback at ground level (since 2016):** 37 deg - **10) Maximum bucket rollback at ground level (since 2016):** 38 deg - **11) Digging depth (since 2016):** 3 in (7.62 cm) - **11) Digging depth (since 2016):** 4 in (10.16 cm) - **12) Grill to bucket cutting edge, carry position (since 2016):** 55 in (139.7 cm) - **12) Grill to bucket cutting edge, carry position (since 2016):** 59 in (149.86 cm) - **12) Grill to bucket cutting edge, carry position (since 2016):** 57 in (144.78 cm) - **13) Maximum operating height (since 2016):** 166 in (421.64 cm) - **13) Maximum operating height (since 2016):** 171 in (434.34 cm) - **13) Maximum operating height (since 2016):** 173 in (439.42 cm) - **13) Maximum operating height (since 2016):** 192 in (487.68 cm) - **1st (since 2016):** 5 3 - **2nd (since 2016):** 9 6 - **3rd (since 2016):** 20 13 - **4th (since 2016):** 36 23 - **7) Maximum hinge pin height (since 2016):** 137 in (347.98 cm) - **8) Dump angle at full height (since 2016):** 44 deg - **9) Dump reach at maximum angle (since 2016):** 29 in (73.66 cm) - **9) Dump reach at maximum angle (since 2016):** 32 in (81.28 cm) - **9) Dump reach at maximum angle (since 2016):** 28 in (71.12 cm) - **Backhoe - 14) Digging depth, SAE (maximum) (since 2016):** 214 in (543.56 cm) - **Backhoe - 14) Digging depth, SAE (maximum) (since 2016):** 173 in (439.42 cm) - **Backhoe - 14) Digging depth, SAE (maximum) (since 2016):** 171 in (434.34 cm) - **Backhoe - 15) Digging depth, 610 mm (2'0") flat bottom (since 2016):** 213 in (541.02 cm) - **Backhoe - 15) Digging depth, 610 mm (2'0") flat bottom (since 2016):** 171 in (434.34 cm) - **Backhoe - 15) Digging depth, 610 mm (2'0") flat bottom (since 2016):** 170 in (431.8 cm) - **Backhoe - 16) Reach from swing pivot at ground line (since 2016):** 262 in (665.48 cm) - **Backhoe - 16) Reach from swing pivot at ground line (since 2016):** 222 in (563.88 cm) - **Backhoe - 16) Reach from swing pivot at ground line (since 2016):** 221 in (561.34 cm) - **Backhoe - 17) Loading reach (since 2016):** 112 in (284.48 cm) - **Backhoe - 17) Loading reach (since 2016):** 76 in (193.04 cm) - **Backhoe - 17) Loading reach (since 2016):** 72 in (182.88 cm) - **Backhoe - 18) Stabilizer spread, operating position (center of pad) (since 2016):** 130 in (330.2 cm) - **Backhoe - 19) Stabilizer spread, operating position (outside edge of pad) (since 2016):** 148 in (375.92 cm) - **Backhoe - Bucket dig force (since 2016):** 13103 lbf (58.3 kN) - **Backhoe - Bucket dig force (since 2016):** 13290 lbf (59.1 kN) - **Backhoe - Bucket rotation (since 2016):** 204 deg - **Backhoe - Bucket rotation (since 2016):** 205 deg - **Backhoe - Loading height (since 2016):** 164 in (416.56 cm) - **Backhoe - Loading height (since 2016):** 142 in (360.68 cm) - **Backhoe - Loading height (since 2016):** 143 in (363.22 cm) - **Backhoe - Maximum operating height (since 2016):** 247 in (627.38 cm) - **Backhoe - Maximum operating height (since 2016):** 218 in (553.72 cm) - **Backhoe - Reach from rear axle centerline at ground line (since 2016):** 305 in (774.7 cm) - **Backhoe - Reach from rear axle centerline at ground line (since 2016):** 265 in (673.1 cm) - **Backhoe - Reach from rear axle centerline at ground line (since 2016):** 264 in (670.56 cm) - **Backhoe - Stabilizer spread, transport position (since 2016):** 91 in (231.14 cm) - **Backhoe - Stick dig force (since 2016):** 5346 lbf (23.8 kN) - **Backhoe - Stick dig force (since 2016):** 7286 lbf (32.4 kN) - **Backhoe - Stick dig force (since 2016):** 7276 lbf (32.4 kN) - **Backhoe - Swing arc (since 2016):** 180 deg - **Backhoe Loading Height (since 2015):** 11.9 ft (3.63 m) - **Bore (since 2016):** 3.90 in (9.91 cm) - **Bucket jaw clamping force (since 2016):** 11375 lbf (50.6 kN) - **Capacity (SAE) rated (since 2016):** 1.0 cu yd (0.76 cu m) - **Capacity (SAE) rated (since 2016):** 1.25 cu yd (0.96 cu m) - **Capacity (SAE) rated (since 2016):** 1.31 cu yd (1 cu m) - **Dump height at maximum angle (since 2016):** 111 in (281.94 cm) - **Dump height at maximum angle (since 2016):** 108 in (274.32 cm) - **Dump height at maximum angle (since 2016):** 110 in (279.4 cm) - **Engine Displacement (since 2016):** 207 cu in (3392.13 cu cm) - **Engine Model (since 2016):** C3.4 ACERT - **Engine Model (since 2017):** C3.4 - **Flywheel Power - Gross - Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) (since 2016):** 74 hp (55.18 kw) - **Flywheel Power - Net - Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) (since 2016):** 68 hp (50.71 kw) - **Fuel Tank Capacity (since 2016):** 42 US gal (160 L) - **Hydraulic System, closed center (since 2016):** Load Sensing, Flow Sharing - **Jaw opening maximum (since 2016):** 31 in (78.74 cm) - **Lift breakout force (since 2016):** 10772 lbf (47.9 kN) - **Lift breakout force (since 2016):** 10189 lbf (45.3 kN) - **Lift breakout force (since 2016):** 9979 lbf (44.4 kN) - **Lift breakout force (since 2016):** 9645 lbf (42.9 kN) - **Lift capacity at maximum height (since 2016):** 6751 lbs (3062.21 kg) - **Lift capacity at maximum height (since 2016):** 6535 lbs (2964.23 kg) - **Lift capacity at maximum height (since 2016):** 6108 lbs (2770.55 kg) - **Lift capacity at maximum height (since 2016):** 5855 lbs (2655.79 kg) - **Loader Breakout Force (since 2015):** 12,281 lbs (5570.57 kg) - **Loader Lift Capacity (since 2015):** 2,466 lbs (1118.56 kg) - **Loader SAE (since 2015):** 68 hp (50.71 kw) - **Machine Dimensions - 1) Overall transport length (since 2016):** 279 in (708.66 cm) - **Machine Dimensions - 1) Overall transport length (since 2016):** 282 in (716.28 cm) - **Machine Dimensions - 1) Overall transport length (since 2016):** 281 in (713.74 cm) - **Machine Dimensions - 2) Overall transport height S-stick (since 2016):** 141 in (358.14 cm) - **Machine Dimensions - 3) Height to top of cab/canopy (since 2016):** 111 in (281.94 cm) - **Machine Dimensions - 4) Height to top of exhaust stack (since 2016):** 108 in (274.32 cm) - **Machine Dimensions - 5) Rear axle centerline to front grill (since 2016):** 106 in (269.24 cm) - **Machine Dimensions - 6) Wheelbase (2WD/AWD) (since 2016):** 87 in (220.98 cm) - **Machine Dimensions - Front wheel tread gauge (since 2016):** 75 in (190.5 cm) - **Machine Dimensions - Ground clearance (485 kg/ 1170 lb counterweight) (since 2016):** 11 in (27.94 cm) - **Machine Dimensions - Ground clearance (AWD guard) (since 2016):** 12 in (30.48 cm) - **Machine Dimensions - Ground clearance (LH step) (since 2016):** 12 in (30.48 cm) - **Machine Dimensions - Overall length (since 2016):** 277 in (703.58 cm) - **Machine Dimensions - Overall length (since 2016):** 281 in (713.74 cm) - **Machine Dimensions - Overall length (since 2016):** 278 in (706.12 cm) - **Machine Dimensions - Overall transport height E-stick (since 2016):** 143 in (363.22 cm) - **Machine Dimensions - Overall width (since 2016):** 91 in (231.14 cm) - **Machine Dimensions - Rear wheel tread gauge (since 2016):** 67 in (170.18 cm) - **Max Digging Depth (since 2015):** 14.3 ft (4.36 m) - **Maximum grading angle (since 2016):** 116 deg - **Maximum grading angle (since 2016):** 112 deg - **No. of Cylinders (since 2016):** 4 - **Operating Weight (since 2015):** 15,207 lbs (6897.79 kg) - **Operating Weight (since 2016):** 15809 lbs (7170.85 kg) - **Pump Capacity (since 2016):** 3336 psi (23000 kPa) - **Rated Engine RPM (since 2016):** 2200 rpm - **Stroke (since 2016):** 4.33 in (11 cm) - **Tilt breakout force (since 2016):** 12281 lbf (54.6 kN) - **Tilt breakout force (since 2016):** 10339 lbf (46 kN) - **Tilt breakout force (since 2016):** 11841 lbf (52.7 kN) - **Tilt breakout force (since 2016):** 11636 lbf (51.8 kN) - **Tires - 2WD Bias Front (since 2016):** 12-16.5 10 PR F-3 - **Tires - 2WD Bias Rear (since 2016):** 19.5L-24 12 PR R-4 - **Tires - AWD Bias Front (since 2016):** 12.5/80-18 12 PR I-3 - **Tires - AWD Bias Front, Flotation (since 2016):** 12.5/80-18 12 PR I-3 - **Tires - AWD Bias Rear (since 2016):** 19.5L-24 12 PR R-4 - **Tires - AWD Bias Rear, Flotation (since 2016):** 21L-24 16 PR R-4 - **Tires - AWD Combination Front (since 2016):** 340/80R18 - **Tires - AWD Combination Rear (since 2016):** 19.5L-24 12 PR R-4 - **Tires - AWD Radial Front (since 2016):** 340/80R18 - **Tires - AWD Radial Rear (since 2016):** 500/70R24 - **Travel Speed 4th Gear Fwd (since 2015):** 23 mph (37.01 kph) - **Turning Circle, Wall to Wall (since 2016):** 432 in (1097.28 cm) - **Weight (does not include teeth or forks) (since 2016):** 847 lbs (384.19 kg) - **Weight (does not include teeth or forks) (since 2016):** 994 lbs (450.87 kg) - **Weight (does not include teeth or forks) (since 2016):** 1642 lbs (744.8 kg) - **Weight (does not include teeth or forks) (since 2016):** 2017 lbs (914.9 kg) - **Width (since 2016):** 89 in (226.06 cm) - **Width (since 2016):** 90 in (228.6 cm) - **Width of dozer cutting edge (since 2016):** 89 in (226.06 cm) ### Hydraulic System - **Hydraulic System Type:** Closed Center - **Pump Capacity At 2,200 Rpm:** 35 gpm (132.48 lpm) - **Pump Type:** Variable Flow, Axial Piston - **System Pressure - Backhoe:** 3336 psi - **System Pressure - Loader:** 3336 psi ### Service Refill Capacities - **Cooling System With Air Conditioning:** 5.8 gal (21.95 l) - **Engine Oil - With Filter:** 2.3 gal (8.71 l) - **Front Axle (4wd):** 2.9 gal (10.98 l) - **Front Axle (4wd) - Planetaries:** 0.2 gal (0.76 l) - **Fuel Tank:** 42 gal (158.97 l) - **Hydraulic System:** 23.8 gal (90.08 l) - **Hydraulic Tank:** 10.6 gal (40.12 l) - **Note:** Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur. - **Rear Axle:** 4.4 gal (16.65 l) - **Rear Axle - Planetaries:** 0.4 gal (1.51 l) - **Transmission - Power Shuttle - 2wd:** 4 gal (15.14 l) - **Transmission - Power Shuttle - 4wd:** 4 gal (15.14 l) ### Standards - **Brakes:** SAE J/ISO 3450; ISO 3450 1996 - **Cab - Fops:** SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II - **Cab - Rops:** SAE J1040 MAY94; ISO 3741 1994 - **Cab - Sound:** ANSI/SAE J1166 OCT98 is 79 dB(A) - **Exterior Sound:** SAE J188 JUN86 is 76 dB(A) ### Steering - **Axle Oscillation:** 11 degrees - **Bore:** 2.6 in (6.6 cm) - **Power Steering:** Hydrostatic - **Rod Diameter:** 1.4 in (3.56 cm) - **Steering Type:** Front Wheel - **Stroke:** 4.7 in (11.94 cm) - **Turning Circle - 2wd/Awd (Inner Wheel Not Braked) - Outside Front Wheels:** 26.8 ft (8.17 m) - **Turning Circle - 2wd/Awd (Inner Wheel Not Braked) - Outside Widest Loader Bucket:** 36 ft (10.97 m) ### Tires - **Choice 1:** Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU - **Choice 2:** Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4 - **Choice 3:** Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU - **Choice 4:** Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH - **Choice 5:** Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4 - **Choice 6:** Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU - **Choice 7:** Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8 ### Transmission - **Power Shuttle Transmission - Forward 1st:** 3.4 mph (5.47 kph) - **Power Shuttle Transmission - Forward 2nd:** 5.5 mph (8.85 kph) - **Power Shuttle Transmission - Forward 3rd:** 12 mph (19.31 kph) - **Power Shuttle Transmission - Forward 4th:** 23 mph (37.01 kph) - **Power Shuttle Transmission - Reverse 1st:** 3.4 mph (5.47 kph) - **Power Shuttle Transmission - Reverse 2nd:** 5.5 mph (8.85 kph) - **Power Shuttle Transmission - Reverse 3rd:** 12 mph (19.31 kph) - **Power Shuttle Transmission - Reverse 4th:** 23 mph (37.01 kph) ### Weights - **Air Conditioning:** 101 lbs (45.81 kg) - **Cab - Rops/Fops:** 359 lbs (162.84 kg) - **Counterweights - Option 1:** 255 lbs (115.67 kg) - **Counterweights - Option 2:** 530 lbs (240.4 kg) - **Counterweights - Option 3:** 1015 lbs (460.4 kg) - **Extendible Stick:** 659 lbs (298.92 kg) - **Four Wheel Drive:** 392 lbs (177.81 kg) - **Mp Bucket (0.96 M3/1.25 Yd3) - No Forks Or Teeth:** 1642 lbs (744.8 kg) - **Operating Weight - Maximum:** 24251 lbs (11000.08 kg) - **Operating Weight - Maximum - Rops Capacity:** 24251 lbs (11000.08 kg) - **Operating Weight - Minimum:** 15207 lbs (6897.79 kg) ## About this model The Caterpillar 415F2 is a backhoe loader designed for construction, utility, and site preparation work. It combines a front loader bucket with a rear backhoe attachment for digging, trenching, loading, and material handling. The 415F2 is part of Caterpillar's F2 series and is commonly used on small to medium job sites where maneuverability and multi-purpose capability are required. Typical applications include excavation, landscaping, road maintenance, and municipal work. As a compact backhoe loader, it is built to perform loader and excavator functions in a single machine, reducing the need for multiple pieces of equipment on site. ## Photos ![2018 Caterpillar 415F2](https://photos.machinefinder.com/47/11746647/79972182_large_42547.jpg) ![2018 Caterpillar 415F2 photo 2](https://photos.machinefinder.com/47/11746647/79972185_large_82231.jpg) ![2018 Caterpillar 415F2 photo 3](https://photos.machinefinder.com/47/11746647/79972191_large_15882.jpg) ![2018 Caterpillar 415F2 photo 4](https://photos.machinefinder.com/47/11746647/79972198_large_73485.jpg) ![2018 Caterpillar 415F2 photo 5](https://photos.machinefinder.com/47/11746647/79972202_large_17041.jpg) ![2018 Caterpillar 415F2 photo 6](https://photos.machinefinder.com/47/11746647/79972206_large_47065.jpg)