# Caterpillar 416C for Sale in Tuscaloosa, AL **URL:** > This machine is being sold for parts. ## Listing details - **Price:** Call for price - **Listing ID:** 47391652 - **Manufacturer:** Caterpillar - **Model:** 416C - **Category:** Backhoe Loaders - **Serial number:** 5YN5709 - **Location:** Tuscaloosa, AL ## Manufacturer specifications ### Axle Ratings - **Dynamic (1):** 6982.1 lbs (3166.49 kg) - **Dynamic (2):** 20414.8 lbs (9258.41 kg) - **Front Axle (2wd) - Static:** 30313.6 lbs (13747.66 kg) - **Rear Axle - Static:** 61222.3 lbs (27765.22 kg) ### Backhoe - **Bucket Dig Force - Ext:** 12065 lbs (5471.66 kg) - **Bucket Dig Force - Standard:** 3000 lbs (1360.54 kg) - **Bucket Dig Force - Std:** 11700 lbs (5306.12 kg) - **Bucket Rotation:** 43 degrees - **Dig Depth - Ext:** 18.2 ft (5.55 m) - **Dig Depth - Standard:** 14.5 ft (4.42 m) - **Dig Depth - Std:** 14.51 ft (4.42 m) - **E-Stick Extended (1):** 18.16 ft (5.54 m) - **E-Stick Extended (2):** 21.9 ft (6.68 m) - **E-Stick Extended (3):** 7836 lbs (3553.74 kg) - **E-Stick Extended (4):** 18.5 lbs (8.39 kg) - **E-Stick Extended (5):** 5780 lbs (2621.32 kg) - **E-Stick Retracted (1):** 18.68 ft (5.69 m) - **E-Stick Retracted (2):** 7704 lbs (3493.88 kg) - **E-Stick Retracted (3):** 8839 lbs (4008.62 kg) - **E-Stick Retracted (4):** 5.83 lbs (2.64 kg) - **Load Height - Ext:** 13.86 ft (4.22 m) - **Load Height - Std:** 11.43 ft (3.48 m) - **Reach At Load Height - Ext:** 8.88 ft (2.71 m) - **Reach At Load Height - Std:** 5.79 ft (1.76 m) - **Reach From Swing Pivot - Standard:** 18.5 ft (5.64 m) - **Stick Dig Force - Standard:** 9894 lbs (4487.07 kg) - **Stick Lift At 2440 Mm (8 Ft) - Standard:** 11.42 lbs (5.18 kg) ### Dimensions - **Ground Clearance:** 0.98 ft (0.3 m) - **Height To Top Of Suspended Cab:** 9.09 ft (2.77 m) - **Transport Height:** 11.77 ft (3.59 m) - **Transport Length:** 22.91 ft (6.98 m) - **Transport Width:** 7.72 ft (2.35 m) - **Wheelbase:** 6.89 ft (2.1 m) ### Engine - **Displacement:** 244.1 cu in (4000.09 cu cm) - **Engine Make:** 2236 - **Engine Model:** 3054 DIT - **Engine Model - Standard:** Cat 3054T Diesel Engine - **Gross Power:** 78 hp (58.17 kw) - **Gross Power - Optional - Sae J1995:** 84 hp (62.64 kw) - **Gross Power - Sae J1995:** 78 hp (58.17 kw) - **Net Power:** 75 hp (55.93 kw) - **Net Power - Sae J1349:** 75 hp (55.93 kw) - **Number Of Cylinders:** 4 - **Power Measured @:** 2200 rpm ### Hydraulic - **Pump Flow Capacity:** 43.1 gpm (163.13 lpm) ### Hydraulic System - **Circuit Type:** Closed center - **Pump Type:** Variable flow, axial piston - **System Pressure:** 3002.28 psi ### Loader - **Bucket Breakout Force:** 9030 lbs (4095.24 kg) - **Bucket Breakout Force - Single Tilt:** 35.42 lbs (16.06 kg) - **Bucket Capacity:** 1 cu yd - **Bucket Capacity - General Purpose:** 8.66 cu yd - **Bucket Width:** 89.06 in (226.21 cm) - **Bucket Width - General Purpose:** 2.42 ft - **Dig Depth:** 4.14 in (10.52 cm) - **Dig Depth - Single Tilt:** 1.25 in (3.17 cm) - **Dump Height At Maximum Angle - Single Tilt:** 4 ft (1.22 m) - **Dump Reach At Maximum Angle - Single Tilt:** 89 ft (27.13 m) - **Lift Capacity At Full Height:** 5780 lbs (2621.32 kg) - **Reach At Max Dump Height:** 2.4 ft (0.73 m) ### Operational - **Fuel Capacity:** 33.9 gal (128.31 l) - **Operating Weight 2wd:** 13960 lbs (6331.07 kg) - **Rear Tires Size 2wd/4wd:** 16.9-24, 10 PR, R4 - **Tire Size Front - 2wd / 4wd:** 11L-16, 12PR, F3 ### Service Refill - **Engine Oil - With Filter:** 2 gal (7.57 l) - **Front Axle (4wd):** 2 gal (7.57 l) - **Fuel Tank:** 33.9 gal (128.31 l) - **Hydraulic System:** 20.9 gal (79.11 l) - **Hydraulic Tank:** 10.1 gal (38.23 l) - **Rear Axle:** 6.4 gal (24.22 l) ### Transmission - **Max Speed - Forward:** 20.4 mph (32.83 kph) - **Max Speed Reverse:** 20.4 mph (32.83 kph) - **Number Of Forward Gears:** 4 - **Number Of Reverse Gears:** 4 ### Weights - **Operating Weight - Maximum:** 21389 lbs (9700.23 kg) - **Operating Weight - Nominal:** 13892 lbs (6300.23 kg) ## About this model The Caterpillar 416C is a backhoe loader designed for general construction, utility, and site maintenance work. It combines a front loader bucket with a rear backhoe attachment, allowing digging, loading, trenching, and material handling in one machine. The 416C is part of Caterpillar's compact backhoe loader range and is commonly used on small to medium job sites where maneuverability and versatility are important. Typical applications include excavation, landscaping, road repair, and municipal work. The machine is known for its diesel powertrain, hydraulic digging capability, and operator station designed for visibility and control in varied working conditions. ## Photos ![Caterpillar 416C](https://s3.amazonaws.com/equipment.ceg/noimage.jpg)