# 2016 Caterpillar 416F2 for Sale in Phoenix, Az **URL:** ## Listing details - **Price:** Auction pricing - **Listing ID:** 89191782 - **Year:** 2016 - **Manufacturer:** Caterpillar - **Model:** 416F2 - **Category:** Backhoe Loaders - **Hours:** 6631 - **Serial number:** CAT0416FCHWB00751 - **Location:** Phoenix, Az - **Auction starts:** 2026-09-30 ## Description Located in Lane 9 Spot 50, Open Operator Station, Backhoe Pilot Controls, 2015 US EPA Label, Requires Diesel Exhaust Fluid, 89 in Loader Bucket, Rear Quick Coupler, 22 in Backhoe Digging Bucket, Equipment-from-Monette-Farms Closing Time: 2026-09-30 09:07:42 AM ## Manufacturer specifications ### Axle Ratings - **Front Axle (2wd) - Dynamic:** 20233 lbs (9177.55 kg) - **Front Axle (2wd) - Static:** 50582 lbs (22943.64 kg) - **Front Axle (4wd) - Dynamic:** 20233 lbs (9177.55 kg) - **Front Axle (4wd) - Static:** 50582 lbs (22943.64 kg) - **Rear Axle - Dynamic:** 20233 lbs (9177.55 kg) - **Rear Axle - Static:** 50582 lbs (22943.64 kg) ### Backhoe - **Dig Depth - E-Stick Extended:** 17.9 ft (5.46 m) - **Dig Depth - Standard:** 14.3 ft (4.36 m) ### Brakes - **Feature (1):** Brakes meet the following standards: SAE J1473 and ISO 3450 requirements. - **Feature (2):** Self-adjusting, completely enclosed and sealed. - **Feature (3):** Foot operated brake pedals can be interlocked for roading. - **Feature (4):** Parking/secondary brakes are independent of the service brake system. - **Feature (5):** Parking brake is mechanically applied through an adjustable hand lever located on the right console. ### Dimensions - **Height:** 11.9167 ft (3.63 m) - **Length:** 23.25 ft (7.09 m) - **Weight:** 24251 lbs (11000.08 kg) - **Width:** 7.5833 ft (2.31 m) ### Engine - **Bore:** 4.2 in (10.67 cm) - **Displacement:** 268 cu in (4391.74 cu cm) - **Engine Model:** Cat C4.4 ACERT - **Gross Power - Iso 14396:** 94 hp (70.1 kw) - **Gross Power - Sae J1995:** 95 hp (70.84 kw) - **Net Peak Power - 1,800 Rpm - Eec 80/1269:** 107 hp (79.79 kw) - **Net Peak Power - 1,800 Rpm - Iso 9249:** 107 hp (79.79 kw) - **Net Peak Power - 1,800 Rpm - Sae J1349:** 106 hp (79.05 kw) - **Net Peak Torque - 1,400 Rpm:** 323 lbs ft (437.92 nm) - **Net Power - Sae J1349:** 87 hp (64.88 kw) - **Note:** Engine meets U.S. EPA Tier 4 Final emission standards. - **Rated Net Power - 2,200 Rpm - Eec 80/1269:** 88 hp (65.62 kw) - **Rated Net Power - 2,200 Rpm - Iso 9249:** 88 hp (65.62 kw) - **Rated Net Power - 2,200 Rpm - Sae J1349:** 87 hp (64.88 kw) - **Rated Net Power - Iso 9249:** 88 hp (65.62 kw) - **Rated Net Power - Sae J1349:** 87 hp (64.88 kw) - **Stroke:** 5 in (12.7 cm) ### Engine Features - **Feature (1):** Regeneration is passive and does not require any input from the operator or disrupt work. - **Feature (10):** Direct injection fuel system provides accurate fuel delivery and efficiency. - **Feature (11):** Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator. - **Feature (12):** Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery. - **Feature (13):** Standard glow plug starting aid system for efficient cold weather starting. - **Feature (14):** High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise. - **Feature (15):** Higher low end torque for better engine/machine performance. - **Feature (16):** Engine is equipped with electric fuel priming pump. - **Feature (2):** Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity. - **Feature (3):** Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals. - **Feature (4):** Front and rear crankshaft oil seals are lip type Viton and PTFE designs featuring an integral dust lip. - **Feature (5):** For durability, inlet valves are nitrided, martensitic chrome silicon steel. - **Feature (6):** For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel. - **Feature (7):** Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life. - **Feature (8):** Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness. - **Feature (9):** Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow. ### General Specifications - **Backhoe Loading Height (since 2015):** 11.9 ft (3.63 m) - **Loader Breakout Force (since 2015):** 12,281 lbs (5570.57 kg) - **Loader Lift Capacity (since 2015):** 2,466 lbs (1118.56 kg) - **Loader SAE (since 2015):** 87 hp (64.88 kw) - **Max Digging Depth (since 2015):** 14.3 ft (4.36 m) - **Operating Weight (since 2015):** 15,207 lbs (6897.79 kg) - **Travel Speed 4th Gear Fwd (since 2015):** 25 mph (40.23 kph) ### Hydraulic System - **Hydraulic System Type:** Closed Center - **Pump Capacity At 2,200 Rpm:** 35 gpm (132.48 lpm) - **Pump Type:** Variable Flow, Axial Piston - **System Pressure - Backhoe:** 3336 psi - **System Pressure - Loader:** 3336 psi ### Service Refill Capacities - **Cooling System With Air Conditioning:** 5.8 gal (21.95 l) - **Diesel Exhaust Fluid (Def)\*:** 5 gal (18.93 l) - **Engine Oil - With Filter:** 2.3 gal (8.71 l) - **Front Axle (4wd):** 2.9 gal (10.98 l) - **Front Axle (4wd) - Planetaries:** 0.2 gal (0.76 l) - **Fuel Tank:** 42 gal (158.97 l) - **Hydraulic System:** 23.8 gal (90.08 l) - **Hydraulic Tank:** 10.6 gal (40.12 l) - **Note (1):** Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur. - **Note (2):** \* Must meet the requirements outlined in ISO 22241. - **Rear Axle:** 4.4 gal (16.65 l) - **Rear Axle - Planetaries:** 0.4 gal (1.51 l) - **Transmission - Power Shuttle - 2wd:** 4 gal (15.14 l) - **Transmission - Power Shuttle - 4wd:** 4 gal (15.14 l) ### Standards - **Brakes:** SAE J/ISO 3450; ISO 3450 1996 - **Cab - Fops:** SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II - **Cab - Rops:** SAE J1040 MAY94; ISO 3741 1994 - **Cab - Sound:** ANSI/SAE J1166 OCT98 is 79 dB(A) - **Exterior Sound:** SAE J188 JUN86 is 76 dB(A) ### Steering - **Axle Oscillation:** 11 degrees - **Bore:** 2.6 in (6.6 cm) - **Power Steering:** Hydrostatic - **Rod Diameter:** 1.4 in (3.56 cm) - **Steering Type:** Front Wheel - **Stroke:** 4.7 in (11.94 cm) - **Turning Circle - 2wd/Awd (Inner Wheel Not Braked) - Outside Front Wheels:** 26.8 ft (8.17 m) - **Turning Circle - 2wd/Awd (Inner Wheel Not Braked) - Outside Widest Loader Bucket:** 36 ft (10.97 m) ### Tires - **Choice 1:** Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU - **Choice 2:** Front: 12.5/80-18 (12 ply) 1-3; Rear: 19.5L-24 (12 ply) ATU - **Choice 3:** Front: 12.5/80-18 NHS (12 ply) 1-3; Rear: 21L-24 (16 ply) R4 ATU - **Choice 4:** Front: 340/80R18; Rear: 19.5L-24 (12 ply) R4 ATU ### Transmission - **Power Shuttle Transmission - Forward 1st:** 3.4 mph (5.47 kph) - **Power Shuttle Transmission - Forward 2nd:** 5.5 mph (8.85 kph) - **Power Shuttle Transmission - Forward 3rd:** 12 mph (19.31 kph) - **Power Shuttle Transmission - Forward 4th:** 23 mph (37.01 kph) - **Power Shuttle Transmission - Reverse 1st:** 3.4 mph (5.47 kph) - **Power Shuttle Transmission - Reverse 2nd:** 5.5 mph (8.85 kph) - **Power Shuttle Transmission - Reverse 3rd:** 12 mph (19.31 kph) - **Power Shuttle Transmission - Reverse 4th:** 23 mph (37.01 kph) ### Weights - **Air Conditioning:** 101 lbs (45.81 kg) - **Cab - Rops/Fops:** 359 lbs (162.84 kg) - **Counterweights - Option 1:** 255 lbs (115.67 kg) - **Counterweights - Option 2:** 530 lbs (240.4 kg) - **Counterweights - Option 3:** 1015 lbs (460.4 kg) - **Extendible Stick:** 659 lbs (298.92 kg) - **Four Wheel Drive:** 392 lbs (177.81 kg) - **Mp Bucket (0.96 M3/1.25 Yd3) - No Forks Or Teeth:** 1642 lbs (744.8 kg) - **Operating Weight - Maximum:** 24251 lbs (11000.08 kg) - **Operating Weight - Maximum - Rops Capacity:** 24251 lbs (11000.08 kg) - **Operating Weight - Minimum:** 15904 lbs (7213.94 kg) ## About this model The Caterpillar 416F2 is a backhoe loader designed for construction, utility, landscaping, and municipal work. It combines a front loader bucket with a rear backhoe attachment for digging, trenching, loading, and material handling. The 416F2 is powered by a Caterpillar diesel engine and is built for maneuverability, operator visibility, and efficient site performance. Typical features include a four-wheel-drive chassis, hydraulic controls, and a cab or canopy configuration depending on specification. The model is used on job sites that require a versatile machine for excavation, backfilling, loading, and general earthmoving tasks. ## Photos ![2016 Caterpillar 416F2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22728/612/006091a2-2b98-4735-9ec5-335092e3c6df-hr.jpg) ![2016 Caterpillar 416F2 photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22728/612/f585b712-c748-4026-a983-6fc068cfd85c-hr.jpg) ![2016 Caterpillar 416F2 photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22728/612/4dc47d98-5c87-44f6-bca5-b6db40bea21c-hr.jpg) ![2016 Caterpillar 416F2 photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22728/612/e052dbb7-fb10-465b-8eb9-66a1720e3b6e-hr.jpg) ![2016 Caterpillar 416F2 photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22728/612/3efc38c2-b256-4f0f-aaa9-c73cd6574aa0-hr.jpg) ![2016 Caterpillar 416F2 photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22728/612/08abdcde-f7ed-4927-b24a-846f8edcdfa1-hr.jpg)