# 2016 Caterpillar 416FST HRC **URL:** > This machine has been sold or is not currently for sale. ## Listing details - **Price:** Sold - **Listing ID:** 88975448 - **Year:** 2016 - **Manufacturer:** Caterpillar - **Model:** 416FST HRC - **Category:** Backhoe Loaders - **Hours:** 6149 - **Serial number:** CAT0416FCHWB00863 - **Location:** Phoenix, Az - **Auction starts:** 2026-08-25 ## Description Located in Lane 3 Spot 11, Open Operator Station, Powershift Transmission, Manual Quick Coupler, 86 in Loader Bucket, Extendable Stick, Quick Coupler, 24 in Backhoe Digging Bucket Closing Time: 2026-08-25 09:10:20 AM ## Manufacturer specifications ### Axle Ratings - **Front Axle (2wd) - Dynamic:** 20233 lbs (9177.55 kg) - **Front Axle (2wd) - Static:** 50582 lbs (22943.64 kg) - **Front Axle (4wd) - Dynamic:** 20233 lbs (9177.55 kg) - **Front Axle (4wd) - Static:** 50582 lbs (22943.64 kg) - **Rear Axle - Dynamic:** 20233 lbs (9177.55 kg) - **Rear Axle - Static:** 50582 lbs (22943.64 kg) ### Backhoe - **Dig Depth - E-Stick Extended:** 17.9 ft (5.46 m) - **Dig Depth - Standard:** 14.3 ft (4.36 m) ### Brakes - **Feature (1):** Brakes meet the following standards: SAE J1473 and ISO 3450 requirements. - **Feature (2):** Self-adjusting, completely enclosed and sealed. - **Feature (3):** Foot operated brake pedals can be interlocked for roading. - **Feature (4):** Parking/secondary brakes are independent of the service brake system. - **Feature (5):** Parking brake is mechanically applied through an adjustable hand lever located on the right console. ### Dimensions - **Height:** 11.9167 ft (3.63 m) - **Length:** 23.25 ft (7.09 m) - **Weight:** 24251 lbs (10998.19 kg) - **Width:** 7.5833 ft (2.31 m) ### Engine - **Bore:** 4.2 in (10.67 cm) - **Displacement:** 268 cu in (4391.74 cu cm) - **Engine Model:** Cat C4.4 ACERT - **Gross Power - Iso 14396:** 94 hp (70.1 kw) - **Gross Power - Sae J1995:** 95 hp (70.84 kw) - **Net Peak Power - 1,800 Rpm - Eec 80/1269:** 107 hp (79.79 kw) - **Net Peak Power - 1,800 Rpm - Iso 9249:** 107 hp (79.79 kw) - **Net Peak Power - 1,800 Rpm - Sae J1349:** 106 hp (79.05 kw) - **Net Peak Torque - 1,400 Rpm:** 323 lbs ft (437.92 nm) - **Net Power - Sae J1349:** 87 hp (64.88 kw) - **Note:** Engine meets U.S. EPA Tier 4 Final emission standards. - **Rated Net Power - 2,200 Rpm - Eec 80/1269:** 88 hp (65.62 kw) - **Rated Net Power - 2,200 Rpm - Iso 9249:** 88 hp (65.62 kw) - **Rated Net Power - 2,200 Rpm - Sae J1349:** 87 hp (64.88 kw) - **Rated Net Power - Iso 9249:** 88 hp (65.62 kw) - **Rated Net Power - Sae J1349:** 87 hp (64.88 kw) - **Stroke:** 5 in (12.7 cm) ### Engine Features - **Feature (1):** Regeneration is passive and does not require any input from the operator or disrupt work. - **Feature (10):** Direct injection fuel system provides accurate fuel delivery and efficiency. - **Feature (11):** Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator. - **Feature (12):** Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery. - **Feature (13):** Standard glow plug starting aid system for efficient cold weather starting. - **Feature (14):** High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise. - **Feature (15):** Higher low end torque for better engine/machine performance. - **Feature (16):** Engine is equipped with electric fuel priming pump. - **Feature (2):** Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity. - **Feature (3):** Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals. - **Feature (4):** Front and rear crankshaft oil seals are lip type Viton and PTFE designs featuring an integral dust lip. - **Feature (5):** For durability, inlet valves are nitrided, martensitic chrome silicon steel. - **Feature (6):** For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel. - **Feature (7):** Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life. - **Feature (8):** Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness. - **Feature (9):** Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow. ### General Specifications - **Backhoe Loading Height (since 2015):** 11.9 ft (3.63 m) - **Loader Breakout Force (since 2015):** 12,281 lbs (5570.57 kg) - **Loader Lift Capacity (since 2015):** 2,466 lbs (1118.56 kg) - **Loader SAE (since 2015):** 87 hp (64.88 kw) - **Max Digging Depth (since 2015):** 14.3 ft (4.36 m) - **Operating Weight (since 2015):** 15,207 lbs (6897.79 kg) - **Travel Speed 4th Gear Fwd (since 2015):** 25 mph (40.23 kph) ### Hydraulic System - **Hydraulic System Type:** Closed Center - **Pump Capacity At 2,200 Rpm:** 35 gpm (132.48 lpm) - **Pump Type:** Variable Flow, Axial Piston - **System Pressure - Backhoe:** 3336 psi - **System Pressure - Loader:** 3336 psi ### Service Refill Capacities - **Cooling System With Air Conditioning:** 5.8 gal (21.95 l) - **Diesel Exhaust Fluid (Def)\*:** 5 gal (18.93 l) - **Engine Oil - With Filter:** 2.3 gal (8.71 l) - **Front Axle (4wd):** 2.9 gal (10.98 l) - **Front Axle (4wd) - Planetaries:** 0.2 gal (0.76 l) - **Fuel Tank:** 42 gal (158.97 l) - **Hydraulic System:** 23.8 gal (90.08 l) - **Hydraulic Tank:** 10.6 gal (40.12 l) - **Note (1):** Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur. - **Note (2):** \* Must meet the requirements outlined in ISO 22241. - **Rear Axle:** 4.4 gal (16.65 l) - **Rear Axle - Planetaries:** 0.4 gal (1.51 l) - **Transmission - Power Shuttle - 2wd:** 4 gal (15.14 l) - **Transmission - Power Shuttle - 4wd:** 4 gal (15.14 l) ### Standards - **Brakes:** SAE J/ISO 3450; ISO 3450 1996 - **Cab - Fops:** SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II - **Cab - Rops:** SAE J1040 MAY94; ISO 3741 1994 - **Cab - Sound:** ANSI/SAE J1166 OCT98 is 79 dB(A) - **Exterior Sound:** SAE J188 JUN86 is 76 dB(A) ### Steering - **Axle Oscillation:** 11 degrees - **Bore:** 2.6 in (6.6 cm) - **Power Steering:** Hydrostatic - **Rod Diameter:** 1.4 in (3.56 cm) - **Steering Type:** Front Wheel - **Stroke:** 4.7 in (11.94 cm) - **Turning Circle - 2wd/Awd (Inner Wheel Not Braked) - Outside Front Wheels:** 26.8 ft (8.17 m) - **Turning Circle - 2wd/Awd (Inner Wheel Not Braked) - Outside Widest Loader Bucket:** 36 ft (10.97 m) ### Tires - **Choice 1:** Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU - **Choice 2:** Front: 12.5/80-18 (12 ply) 1-3; Rear: 19.5L-24 (12 ply) ATU - **Choice 3:** Front: 12.5/80-18 NHS (12 ply) 1-3; Rear: 21L-24 (16 ply) R4 ATU - **Choice 4:** Front: 340/80R18; Rear: 19.5L-24 (12 ply) R4 ATU ### Transmission - **Power Shuttle Transmission - Forward 1st:** 3.4 mph (5.47 kph) - **Power Shuttle Transmission - Forward 2nd:** 5.5 mph (8.85 kph) - **Power Shuttle Transmission - Forward 3rd:** 12 mph (19.31 kph) - **Power Shuttle Transmission - Forward 4th:** 23 mph (37.01 kph) - **Power Shuttle Transmission - Reverse 1st:** 3.4 mph (5.47 kph) - **Power Shuttle Transmission - Reverse 2nd:** 5.5 mph (8.85 kph) - **Power Shuttle Transmission - Reverse 3rd:** 12 mph (19.31 kph) - **Power Shuttle Transmission - Reverse 4th:** 23 mph (37.01 kph) ### Weights - **Air Conditioning:** 101 lbs (45.81 kg) - **Cab - Rops/Fops:** 359 lbs (162.84 kg) - **Counterweights - Option 1:** 255 lbs (115.67 kg) - **Counterweights - Option 2:** 530 lbs (240.4 kg) - **Counterweights - Option 3:** 1015 lbs (460.4 kg) - **Extendible Stick:** 659 lbs (298.92 kg) - **Four Wheel Drive:** 392 lbs (177.81 kg) - **Mp Bucket (0.96 M3/1.25 Yd3) - No Forks Or Teeth:** 1642 lbs (744.8 kg) - **Operating Weight - Maximum:** 24251 lbs (11000.08 kg) - **Operating Weight - Maximum - Rops Capacity:** 24251 lbs (11000.08 kg) - **Operating Weight - Minimum:** 15904 lbs (7213.94 kg) ## About this model The Caterpillar 416F2 is a backhoe loader designed for construction, utility, municipal, and agricultural work. It combines a front loader bucket with a rear backhoe attachment for digging, trenching, loading, and material handling. The 416F2 is part of Caterpillar's F2 series and is commonly used on job sites that require a versatile machine with multiple functions in one platform. Typical applications include excavation, site preparation, landscaping, road maintenance, and general earthmoving. The model is known for its compact design, operator visibility, and compatibility with a range of work tools and attachments for varied job requirements. ## Photos ![2016 Caterpillar 416FST HRC](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22710/356/6e85a737-74ff-4b1e-90fd-8d72f907a06a-hr.jpg) ![2016 Caterpillar 416FST HRC photo 2](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22710/356/3b3bfe40-fcc0-4802-a287-3e7fe6650b96-hr.jpg) ![2016 Caterpillar 416FST HRC photo 3](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22710/356/4883afbd-344c-434c-809a-9c7703abf7e6-hr.jpg) ![2016 Caterpillar 416FST HRC photo 4](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22710/356/fe5d8fb5-5a0a-45a5-a68e-00ecbf12adf5-hr.jpg) ![2016 Caterpillar 416FST HRC photo 5](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22710/356/d59517e9-7764-4a14-ae51-adcd0cf79f97-hr.jpg) ![2016 Caterpillar 416FST HRC photo 6](https://www-ironplanet.s3-us-west-2.amazonaws.com/i/22710/356/befc0f3d-757b-42ad-9a85-ba5d2c402def-hr.jpg)