# Caterpillar PM622 for Sale in Salem, VA

**URL:** <https://www.constructionequipmentguide.com/used-equipment/caterpillar/cold-planers-milling-machines/pm622/id/69017231>

## Listing details

- **Price:** $360,000.00 USD
- **Listing ID:** 69017231
- **Manufacturer:** Caterpillar
- **Model:** PM622
- **Category:** Cold Planers / Milling Machines
- **Type:** Tracked Cold Planers
- **Hours:** 3177
- **Serial number:** JFC00151
- **Location:** Salem, VA

## Description

., CANOPY, FOLDING, HYDRAULIC, CHAMBER AR (2.2M/88"), COMMISSIONING, NOT NEEDED, CONTROL, CAT G&S SYSTEM, CONVEYOR CAMERA, CUTTING BIT TRAY, DISCHARGE CONVEYOR, FOLDING, DISPLAY, OPTIONAL, DOUBLE CENTER DISPLAY, DUST REDUCTION ADD. (2.2M/88"), Engine, ENGINE, CAT C18 ACERT, FILM, NACD, HYDR. OIL HYDO ADVANCED 10W, INBOARD SKI, LANE 3 ORDER, LIGHT, TRUCK SIGNAL, LIGHTS, HALOGEN, LOW PRESSURE WASH DOWN, NO CONVEYOR SWING VALVE, Online Owner's Manual , PLUG, NO WATER FILL PUMP, PNEUMATIC BIT REMOVAL TOOL, PORT, FILLING, WATER TANK, PRODUCT LINK, CELLULAR PL641, PUMP, WASHING, HIGH PRESSURE, REAR CAMERA, ROLL ON-ROLL OFF, ROTOR TURNING DEVICE, ROTOR, G SYSTEM - STD, SEAT FULL SIZE SUSPENSION, SENSOR, SONIC, SERIALIZED TECHNICAL MEDIA KIT, SIDE FILL VALVE & PORT, TANK, FUEL STANDARD, TENSIONER, GREASE, VENTILATION SYSTEM

## Manufacturer specifications

### Cutting System

- **Maximum Milling Depth (since 2026):** 13 in (33.02 cm)
- **Milling Width (since 2026):** 88 in (223.52 cm)
- **Minimum Left Cutting Radius (since 2026):** 6.56 ft (2 m)
- **Minimum Right Cutting Radius (since 2026):** 5.91 ft (1.8 m)
- **Number of Bits (since 2026):** 185
- **Rotor Speeds (since 2026):** 100 / 109 / 118 rpm

### Dimensions

- **Conveyor Swing (since 2026):** ±60 degrees from center
- **Height - Canopy (since 2026):** 13.29 ft (4.05 m)
- **Maximum Truck Clearance (since 2026):** 15.94 ft (4.86 m)
- **Operating Length - Conveyor Up (since 2026):** 47.64 ft (14.52 m)
- **Operating Width (since 2026):** 10.2 ft (3.11 m)
- **Transport Height (since 2026):** 9.84 ft (3 m)
- **Transport Length (since 2026):** 40.78 ft (12.43 m)
- **Transport Width (since 2026):** 8.89 ft (2.71 m)

### General Specifications

- **DEPTH CUT (since 2016):** 13 in (33.02 cm)
- **DIMENSIONS (since 2016):** 9.15 x 47.6
- **DIMENSIONS (since 2022):** 8.89 x 47.6
- **DIMENSIONS (since 2025):** 8.89 x 47.64
- **ENGINE (since 2016):** 630 hp (469.8 kw)
- **ENGINE (since 2025):** 636 hp (474.27 kw)
- **MODEL (since 2016):** PM622
- **OPERATING WEIGHT (since 2016):** 74,580 lbs (33828.96 kg)
- **OPERATING WEIGHT (since 2022):** 74,737 lbs (33900.18 kg)
- **OPERATING WEIGHT (since 2025):** 70,626 lbs (32035.45 kg)
- **WIDTH CUT (since 2016):** 88 in (223.52 cm)

### Power Train

- **Build Number (since 2026):** 02C
- **Emissions (since 2026):** U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
- **Engine (since 2026):** Cat C18
- **Engine Power (since 2026):** 629 hp (469.05 kw)
- **Gross Power (since 2026):** 636 hp (474.27 kw)
- **Maximum Milling Speed (since 2026):** 328 ft/min (99.97 m/min)
- **Maximum Travel Speed (since 2026):** 3.7 mph (5.95 kph)

### Service Refill Capacities

- **Cooling System (since 2026):** 22.5 gal (85.16 l)
- **Diesel Exhaust Fluid (DEF) Tank (since 2026):** 12.4 gal (46.93 l)
- **Engine Oil (since 2026):** 17.2 gal (65.1 l)
- **Fuel Tank (since 2026):** 292.7 gal (1107.87 l)
- **Hydraulic Tank (since 2026):** 29.9 gal (113.17 l)
- **Water Spray System Tank (since 2026):** 898.2 gal (3399.69 l)

### Sustainability

- **Recyclability (since 2026):** 95%

### Weights

- **Operating Weight (since 2026):** 70626 lbs (32035.45 kg)
- **Transport Weight (since 2026):** 67916 lbs (30806.22 kg)

## Photos

![Caterpillar PM622](https://s3.amazonaws.com/equipment.ceg/noimage.jpg)