2013 Caterpillar 259B3 For Sale in Waupun, WI




For Sale: $31,900.00 USD

This machine is available to rent.

Daily$235
Weekly$700
Monthly$2100

Hull's 151 Implement

https://www.hulls151.com


Contact: Equipment Manager

Click for Phone Number

Machine Info:

Hours:2209
Stock Number:90601
Machine Location:WAUPUN WI, 53963

Description:

OUT ON LONG TERM RENTAL. CAB,,A/C, HEAT, 2 SPEED, HYDR. QUICK COUPLER, VERY SHARP! BEEN THRU SHOP AND RENT TESTED, CAT 74" BKT W. BOLT ON EDGE. EXCELLENT 12.5" RUBBER TRACKS. 2949LB LIFT CAP, 8934LB OPER. WT. SKID STEER ATTACHMENTS FOR RENT: GRAPPLE BKT, PALLET FORKS, POST HOLE DIGGER, CONCRETE BREAKER, 6' BUSH HOG MOWER, 72' ROTO TILLER.


Machine Details:

Condition
Used


Specs from the manufacturer:

Cab
FOPSSAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level IISAE J231 JAN81, ISO 3449:1992 Level II
ROPSSAE J1040 MAY94, ISO 3471:1994
Dimensions
Bucket Pin Height - Carry Position8 in (20 cm)
Bucket Pin Height - Maximum Lift10 ft (3 m)
Clearance at Max Lift and Dump7 ft (2 m)
Clearance at Maximum Lift and Dump88 in (224 cm)
Departure Angle35 °
Ground Clearance9 in (23 cm)
Height - Top of Cab7 ft (2 m)
Length - Track on Ground59 in (150 cm)
Length - with Bucket11 ft (3 m)
Length - With Bucket on Ground135 in (343 cm)
Length - Without Bucket107 in (272 cm)
Length - without Bucket9 ft (3 m)
Maximum Dump Angle49.5 °
Maximum Overall Height152 in (386 cm)
Maximum Reach - With Arms Parallel53 in (135 cm)
Overall Length - Track79 in (201 cm)
Rack Back Angle - Maximum Height87 °
Reach at Max Lift and Dump3 ft (1 m)
Reach at Maximum Lift/Dump29 in (74 cm)
Turn Radius from Center - Bucket86 in (218 cm)
Turn Radius from Center - Coupler55 in (140 cm)
Turn Radius from Center - Rear58 in (147 cm)
Turning Radius from Center - inc bucket86 in (217 cm)
Turning Radius from Center - machine rear58 in (147 cm)
Vehicle Width66 in (168 cm)
Width Over Tracks6 ft (2 m)
Engine
Bore4 in (9 cm)
Displacement201 cu in (0 m)
Engine ModelCat C3.4T
Gross Power74 hp (55 kw)
Gross Power - SAE J199574 hp (55 kw)
Net Power71 hp (53 kw)
Net Power - SAE 134971 hp (53 kw)
Stroke5 in (12 cm)
Hydraulic System
Hydraulic Flow (1)Standard
Hydraulic Flow (2)High Flow
Hydraulic Power43 hp (32 kw)
Hydraulic Power - Calculated60 hp (45 kw)
Loader Hydraulic Pressure3,335 psi
Pump Flow22 gal/min (83 l/min)
Relief Valve Pressure3,335 psi
Loader
Breakout Force4,509 lbs (2,045 kg)
Operating Load2,950 lbs (1,338 kg)
Tipping Angle5899.6 °
Operating Specifications
1212 V V
9090 A
Breakout Force - Tilt Cylinder4,508 lbs (2,045 kg)
Cooling System Fluid Capacity3 gal (10 l)
Engine Oil Capacity2 gal (9 l)
Fuel Capacity22 gal (84 l)
Ground Contact Area1,495 cu in (0 m)
Ground Pressure6 psi
Hydraulic System Fluid Capacity15 gal (55 l)
Max Speed - high range9 mph (14 kph)
Max Speed - low range6 mph (9 kph)
Operating Weight9,226 lbs (4,185 kg)
Rated Operating Capacities - 35% Tipping Load2,065 lbs (937 kg)
Rated Operating Capacities - 50% Tipping Load2,950 lbs (1,338 kg)
Rated Operating Capacity with Optional Counterweight3,000 lbs (1,361 kg)
Tipping Load5,900 lbs (2,676 kg)
Power Train
Travel Speed Forward6 mph (9 kph)
Travel Speed Forward - 2-Speed9 mph (14 kph)
Travel Speed Reverse6 mph (9 kph)
Travel Speed Reverse - 2-Speed9 mph (14 kph)
Service Refill Capacities
Cooling System3 gal (10 l)
Engine Crankcase2 gal (9 l)
Fuel Tank22 gal (84 l)
Hydraulic System15 gal (55 l)
Hydraulic Tank9 gal (35 l)
Undercarriage
Ground Contact Area1,848 cu in (0 m)
Ground Pressure5 psi
Length of Track on Ground5 ft (2 m)
Width of Track16 in (40 cm)
Weights
Operating Weight8,934 lbs (4,052 kg)

Dealer Contact Info:

Hull's 151 Implement




Contact: Equipment Manager

Click for Phone Number