This machine has been sold.

2016 Caterpillar 259D




MACHINE SOLD


Gregory Poole CAT

https://www.gregorypoole.com


Contact: McCrea Wallace

Click for Phone Number

Machine Info:

Hours:1442
Serial Number:FTL06375
Stock Number:EQ006994
Machine Location:RALEIGH NC, 27606

Description:

259D CTL TIER 4 FINAL HRCCONTROL, ISO, PROPCONVERSION ARRANGEMENTDISPLAY, BASIC, ANTI-THEFTFAN, COOLING, DEMANDINSTRUCTIONS, ANSI, NACDINSTRUCTIONS, ENGLISHLANE 2 ORDERPACK, DOMESTIC TRUCKPACKAGE, PERFORMANCE, (H2)QUICK COUPLER, MANUALRIDE CONTROL, NONEROPS, OPEN (C1)RUBBER BELT, 2 SPD, D/S IDLERSEAT BELT, 2"SEAT, SUSPENSION, VINYLSHIPPING/STORAGE PROTECTIONTRACK, RUBBER, 15.7 IN (400MM)

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
S.O.S. TakenNo
BumperFair - Missing paint.
Cab or CanopyGood - Canopy
Crankcase Guard / Battery BoxGood
Eng. Enclose Hood / StackFair - Rear door has small dent. Rear door screen dented & torn.
Fuel TankGood
Grab IronsGood
Main Frame WeldsGood - Bottom rear corner of frame dented.
PaintFair
Radiator Grill & ShroudFair - Radiator grill shock bad.
Sheet MetalGood
Steps / LadderFair - Front steps bent.
SAFETY ITEMS
ROPSYes
Safety Decals In PlaceYes
Safety Decals LegibleYes
HornGood
Parking BrakeGood
GAUGES, OPERATOR STATION, CONSOLE
Back Up AlarmYes - New alarm installed.
Current O&MMYes - Weathered.
Current Parts ManualYes - CD.
Current Safety ManualYes - Weathered.
Fuel Level - 1/2 tank.
Dash ConsoleGood
EMS Panel / WarningsGood
Floor BoardsGood
GaugesGood
Glass/MirrorsGood - Mirror
Hydraulic ControlsGood
Interior LightsPoor - Dome light INOP.
MeterGood
Seat BeltGood
Seat Cushion / Arm RestFair - Both arm rests are loose & falling down.
SwitchesGood - Switch faces worn.
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Anti-Freeze Color - Red
Notes - ENGINE - PM performed @ 1299 hours.
Oil Pressure (H/L/N) - Normal.
Smoke (B/D/L/W) - Normal.
Air CleanersFair
Belts / PulleysGood
Engine SupportsGood
Exhaust / MufflerGood
Fuel Injection SystemGood
GovernorGood
Overall Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMYes - Block drain valve leaking.
CoolersGood
FanGood
Fan DriveGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Block HeaterNo
Ether AidNo
AlternatorGood - Charging well.
Batteries / CablesGood
LightingGood - All lights working.
StarterGood
WiringGood
TANDEMS/GEARS/BEARINGS/CHAINS
Front Torsion BarsFair - Normal wear.
Lines / LinkagesGood
Operating ConditionGood
Rear Torsion BarsFair - Normal wear.
Travel ControlsGood - Two speed travel working.
Travel MotorsGood
Travel PumpsGood
HYDRAULICS
Leaks - HYDRAULICSNo
Detent SwitchGood - Front bucket float and leveler working.
Hoses / LinesFair - Left rear aux. hose clamps missing on frame.
Lift CylindersGood
Overall Operating Condition - HYDRAULICSGood
Pump & ValvesGood
TankGood
Tilt CylinderGood
BUCKET
Bucket Capacity - 74".
Bucket S/N - A4193MP20052.
Bucket BottomGood
Bucket LinkageGood
Bucket SidesGood
Cutting EdgesGood - Edge never flipped.
Loader FrameGood
Loader Pins & BushingsFair - Lower loader arm pins & bushings have wear.
Multi Purpose CylindersGood
Quick CouplerFair - Caterpillar manual coupler. Worn to backside of bucket.
UNDERCARRIAGE
Percentage Worn - 50%.
Track / Belt Width - 16".
IdlersPoor - Both idler support tubes loose & needing wearstrips.
RollerGood
Roller FrameGood
SprocketGood - Worn 25%.
Track / Belt ConditionFair - Left hand track has a piece of rubber torn out the side of belt. Tracks are tracking off. More lugs on outside have more wear.
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Inspection done 8Sept20 @ 1438 hours.


Specs from the manufacturer:

Air Conditioning System
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Cab
FOPSISO 3449:2005 Level I
FOPS Level IIISO 3449:2005 Level II
ROPSISO 3471:2008
Dimensions
Bucket Pin Height - Carry Position8 in (20 cm)
Bucket Pin Height - Maximum Lift10 ft (3 m)
Bucket Pin Reach - Maximum Lift9 in (24 cm)
Clearance at Max Lift and Dump8 ft (2 m)
Clearance at Maximum Lift and Dump90 in (228 cm)
Departure Angle35 °
Dump angle52 °
Ground Clearance9 in (23 cm)
Height - Top of Cab7 ft (2 m)
Length - Track on Ground59 in (150 cm)
Length - with Bucket12 ft (4 m)
Length - With Bucket on Ground137 in (349 cm)
Length - Without Bucket109 in (277 cm)
Length - without Bucket9 ft (3 m)
Maximum Dump Angle52 °
Maximum Overall Height154 in (391 cm)
Maximum Reach - With Arms Parallel to Ground51 in (131 cm)
Note#
Overall Height13 ft (4 m)
Overall Length - Track79 in (200 cm)
Overall Track Length7 ft (2 m)
Rack Back Angle - Maximum Height87 °
Reach - Maximum Lift/Dump24 in (61 cm)
Reach at Max Lift and Dump2 ft (1 m)
Turning Radius from Center - Bucket86 in (218 cm)
Turning Radius from Center - Coupler55 in (139 cm)
Turning Radius from Center - machine rear62 in (156 cm)
Vehicle Width (320 mm/12.6 in tracks)66 in (168 cm)
Vehicle Width (400 mm/15.7 in tracks)69 in (175 cm)
Engine
Bore4 in (9 cm)
Displacement203 cu in (0 m)
Engine MakeDIT
Engine ModelCat C3.3B DIT (turbo)
Gross Power74 hp (55 kw)
Gross Power - SAE J199574 hp (55 kw)
Net Power73 hp (55 kw)
Net Power - ISO 924974 hp (55 kw)
Net Power - SAE 134973 hp (55 kw)
Peak Torque196 lbs/ft
Peak Torque - 1,500 rpm - SAE J1995195 ft lbs (89 kg)
Stroke5 in (12 cm)
Torque Measured @1,500 rpm
Hydraulic System
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)58 hp (43 kw)
Hydraulic Flow - High Flow - Loader Hydraulic Flow30 gal/min (114 l/min)
Hydraulic Flow - High Flow - Loader Hydraulic Pressure3,335 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)39 hp (29 kw)
Hydraulic Flow - Standard - Loader Hydraulic Flow20 gal/min (76 l/min)
Hydraulic Flow - Standard - Loader Hydraulic Pressure3,335 psi
Pump Flow20 gal/min (76 l/min)
Relief Valve Pressure3,336 psi
Loader
Breakout Force5,035 lbs (2,284 kg)
Operating Load2,899 lbs (1,315 kg)
Operating Width 66 in (168 cm)
Tipping Load5,800 lbs (2,631 kg)
Noise Level
Inside Cab*83 dB(A)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)###############################################################################################################################################################################################################################################################
Note (3)***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**103 dB(A)
Operating Specifications
1212 V V
8080 A
Breakout Force - Tilt Cylinder5,035 lbs (2,284 kg)
Cooling System Fluid Capacity4 gal (14 l)
Engine Oil Capacity3 gal (11 l)
Fuel Capacity28 gal (105 l)
Ground Contact Area - With 320 mm/12.6 in Track1,483 cu in (0 m)
Ground Contact Area - With 400 mm/15.7 in Track1,848 cu in (0 m)
Ground Pressure - With 320 mm/12.6 in Track6 psi
Ground Pressure - With 400 mm/15.7 in Track5 psi
Hydraulic System Fluid Capacity13 gal (50 l)
Max Speed - high range9 mph (14 kph)
Max Speed - low range6 mph (10 kph)
Note#
Operating Weight8,847 lbs (4,013 kg)
Rated Operating Capacities - 35% Tipping Load2,030 lbs (921 kg)
Rated Operating Capacities - 50% Tipping Load2,900 lbs (1,315 kg)
Rated Operating Capacity with Optional Counterweight3,100 lbs (1,406 kg)
Tipping Load5,800 lbs (2,631 kg)
Power Train
Travel Speed - Forward or Reverse - One Speed6 mph (9 kph)
Travel Speed - Forward or Reverse - Two Speed9 mph (14 kph)
Service Refill Capacities
Cooling System4 gal (14 l)
Engine Crankcase3 gal (11 l)
Fuel Tank28 gal (105 l)
Hydraulic System13 gal (50 l)
Hydraulic Tank10 gal (39 l)
Undercarriage
Ground Contact Area1,488 cu in (0 m)
Ground Pressure6 psi
Length of Track on Ground12 ft (4 m)
Weights
Note#
Operating Weight8,945 lbs (4,057 kg)

Dealer Contact Info:

Gregory Poole CAT




Contact: McCrea Wallace

Click for Phone Number