2013 Caterpillar 289C2 For Sale in Piscataway, NJ




Click Here
>
Explore All Financing Options

For Sale: $29,000.00 USD


Foley Incorporated

www.foleyinc.com


Contact: Foley Used Team

Click for Phone Number


Machine Info:

Hours:4167
Serial Number:RTD01341
Stock Number:UT50449
Machine Location:PISCATAWAY NJ, 08854

Description:

*CONVERSION ARRANGEMENT*DOOR, CAB, GLASS*ENGINE,TIER4 INTERIM COMPLIANT*HEATER, ENGINE COOLANT, 120V*HYDRAULICS, PROPORTIONAL*HYDRAULICS, STANDARD FLOW*IDLERS, STANDARD*PACKAGE, PERFORMANCE, (TL2)*QUICK COUPLER, HYDRAULIC*RADIO READY*ROPS, ENCLOSED WITH A/C (C3)*SEAT BELT, 2"*SEAT, COMFORT, AIR SUSPENSIONCAROLINA CDC - - AVAILABILITYPROTECTION,SHIP&STORE STANDARDTRIPLE FLANGE IDLERS

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
S.O.S. TakenNo
Cab or CanopyGood
Crankcase Guard / Battery BoxFair - BOTH BOTTOM SEVICE DOORS 1 BIG+1 SMALL,, HAVE SMALL BENDS.
Eng. Enclose Hood / StackFair - SCRAPES+GOUGES.
Fuel TankGood
Grab IronsGood
Main Frame WeldsGood
PaintGood
Radiator Grill & ShroudGood
Sheet MetalGood
Steps / LadderFair - BUCKET STEP BENT.
SAFETY ITEMS
HornGood
Parking BrakeGood
GAUGES, OPERATOR STATION, CONSOLE
Back Up AlarmNo - N/G.
Air ConditionerGood
Dash ConsoleGood
Door LatchesGood
EMS Panel / WarningsGood
Floor BoardsGood
GaugesGood
Glass/MirrorsFair - FRT DOOR GLASS FEW SCRAPES+DOOR SEAL CUTS N/G. REAR VIEW MIRROR LOOSE+HANGING.
HeaterFair - 1 HEAT VENT BROKE.
Hydraulic ControlsFair - LEFT SIDE CONTROL 1 SWITCH BUTTON BROKE.
Interior LightsGood
MeterGood
Seat BeltGood
Seat Cushion / Arm RestFair - COUPLE STAINS.
SwitchesGood
Windshield WipersPoor - N/G NOT WORKING.
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksYes - NOTE,, ENGINE DIRTY+WET WITH DIRT STUCK ON.. 2 NEW INJECTORS POSSIBLE NEEDS CLEANIN
Water in OilNo
Air CleanersGood
Belts / PulleysGood
Engine SupportsGood
Exhaust / MufflerGood
Fuel Injection SystemGood
GovernorGood
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
CoolersGood
FanGood
Fan DriveGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
Batteries / CablesGood
LightingGood
StarterGood
WiringGood
TANDEMS/GEARS/BEARINGS/CHAINS
Lines / LinkagesGood
Travel ControlsGood
Travel MotorsGood
Travel PumpsGood
HYDRAULICS
Leaks - HYDRAULICSNo
Lift CylindersGood
TankGood
Tilt CylinderFair - WEAR AT MOUNTING PINS+BUSHINGS.
BUCKET
Bucket Capacity - GP..
Bucket BottomPoor - WORN AND SPLIT OPEN.
Bucket LinkageFair - WEAR AT TILT CLYS MOUNTING PINS+BUSHINGS.
Bucket SidesGood
Cutting EdgesPoor - N/G.
Loader FrameFair - AUX HOSE BRACKET SMALL BENDS,, + AUX ELECTRIC HARNESS BRACKET BENT.
Loader Pins & BushingsFair - SOME WEAR AT BOTTOM LOADER FRAME PINS+BUSHINGS.
Quick CouplerGood - HYD.


Specs from the manufacturer:

Cab
FOPSSAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level IISAE J231 JAN81, ISO 3449:1992 Level II
ROPSSAE J1040 MAY94, ISO 3471:1994
Dimensions
Bucket hinge pin127.60 in (324 cm)
Bucket Pin Height - Carry Position7.70 in (20 cm)
Bucket Pin Height - Maximum Lift10.70 ft (3 m)
Bucket Pin Reach - Maximum Lift14.60 in (37 cm)
Clearance at Max Lift and Dump8.10 ft (2 m)
Clearance at Maximum Lift and Dump96.70 in (246 cm)
Departure Angle44 °
Dump angle50 °
Ground Clearance9.10 in (23 cm)
Height - Top of Cab7 ft (2 m)
Length - Track on Ground64 in (163 cm)
Length - with Bucket12.10 ft (4 m)
Length - With Bucket on Ground144.80 in (368 cm)
Length - Without Bucket116.50 in (296 cm)
Length - without Bucket9.80 ft (3 m)
Maximum Dump Angle50 °
Maximum Overall Height160.70 in (408 cm)
Maximum Reach - With Arms Parallel50.50 in (128 cm)
Overall height13.40 ft (4 m)
Overall Length - Track83.80 in (213 cm)
Overall Track Length7 ft (2 m)
Rack Back Angle - Maximum Height85 °
Reach at Max Lift and Dump2.60 ft (1 m)
Reach at Maximum Lift/Dump30.70 in (78 cm)
Turn Radius from Center - Bucket88.10 in (224 cm)
Turn Radius from Center - Coupler57.40 in (146 cm)
Turn Radius from Center - Rear69.40 in (176 cm)
Turning Radius from Center - machine rear69.40 in (176 cm)
Vehicle Width78 in (198 cm)
Width Over Tracks6.50 ft (2 m)
Engine
Bore3.70 in (9 cm)
Displacement201 cu in (0 m)
Engine MakeCaterpillar
Engine ModelCat C3.4T
Gross Power74 hp (55 kw)
Gross Power - SAE J199574 hp (55 kw)
Net Power73 hp (54 kw)
Net Power - SAE 134973 hp (54 kw)
Stroke4.70 in (12 cm)
Hydraulic System
Hydraulic Flow (1)Standard
Hydraulic Flow (2)High Flow XPS
Hydraulic Power42.80 hp (32 kw)
Loader Hydraulic Flow22 gal/min (83 l/min)
Loader Hydraulic Pressure3,335 psi
Maximum Loader Hydraulic Flow33 gal/min (125 l/min)
Maximum Loader Hydraulic Pressure4,061 psi
Pump Flow22.20 gal/min (84 l/min)
Pump TypeStandard
Relief Valve Pressure3,335.90 psi
Loader
Breakout Force7,308.40 lbs (3,315 kg)
Operating capacity (ISO 14397)3,650.90 lbs (1,656 kg)
Tipping Load7,299.60 lbs (3,311 kg)
Operating Specifications
1212 V
9090 A
Breakout Force - Tilt Cylinder7,308 lbs (3,315 kg)
Cooling System Fluid Capacity3.70 gal (14 l)
Fuel Capacity25.90 gal (98 l)
Ground Contact Area2,303 cu in (0 m)
Ground Pressure4.50 psi
Hydraulic System Fluid Capacity15.10 gal (57 l)
Operating Weight10,333.10 lbs (4,687 kg)
Rated Operating Capacities - 35% Tipping Load2,555 lbs (1,159 kg)
Rated Operating Capacities - 50% Tipping Load3,650 lbs (1,656 kg)
Tipping Load7,300 lbs (3,311 kg)
Travel Speed8.50 mph (14 kph)
Power Train
Travel Speed Forward5 mph (8 kph)
Travel Speed Forward - 2-Speed8.50 mph (14 kph)
Travel Speed Reverse5 mph (8 kph)
Travel Speed Reverse - 2-Speed8.50 mph (14 kph)
Service Refill Capacities
Cooling System3.70 gal (14 l)
Engine Crankcase2.60 gal (10 l)
Fuel Tank26 gal (98 l)
Hydraulic System15 gal (57 l)
Hydraulic Tank11 gal (42 l)
Undercarriage
Counterweight, Standard125.70 lbs (57 kg)
Ground Contact Area2,309.60 cu in (0 m)
Ground Pressure4.50 psi
Length of Track on Ground5.40 ft (2 m)
Weights
Operating Weight10,332 lbs (4,687 kg)

Dealer Contact Info:

Foley Incorporated




Contact: Foley Used Team

Click for Phone Number