This machine has been sold.

2004 Caterpillar D3GXL



MACHINE SOLD


Michigan Cat

https://www.michigancat.com


Contact: Used Equipment

Click for Phone Number

Machine Info:

Hours:670
Serial Number:JMH00916
Stock Number:JMH916
Machine Location:NOVI MI, 48375

Description:

BLADE, PATDRAWBARENGINE ENCLOSURESHYD CONTROLLIGHTINGOROPSPILOT CONTROLSTEER, JOYSTICKXL

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredNo
S.O.S. TakenNo
Notes - GENERAL APPEARANCE - Clean,straight, original machine
BumperGood
Cab or CanopyGood
DecalsGood
Draw BarGood
Fuel TankGood
Grab IronsGood
HoodGood
PaintGood - Light surface rust on lower roller frames and lower c-frame
Pre-Cleaner BowlGood
Sheet MetalGood
Steps / LadderGood
GAUGES, OPERATOR STATION, CONSOLE
Dash ConsoleGood
GaugesGood
Glass/MirrorsGood - Mirror in place
HeaterGood - Working
Seat Cushion / Arm RestGood - In good condition
SwitchesGood
ENGINE
Blow ByNo
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Notes - ENGINE - Powered by Mitsubishi/Caterpillar S6SD. 6-cylinder turbo diesel
Oil Pressure (H/L/N) - Operated in normal range
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood - Starts and runs good
Turbocharger / BlowerGood
COOLING SYSTEM
Standard RadiatorYes
Belts / Pulleys - COOLING SYSTEMGood
FanGood
HosesGood
RadiatorGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Ether AidYes
AlternatorGood
Batteries / CablesGood
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONGood
Lines / Fittings - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood - Operated good through speeds
SealsGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Steering LinkageGood - Left pilot operated joystick controls
Steering Operating ConditionGood - Steers good
BRAKE
Notes - BRAKE - Service and parking brake working good
HYDRAULICS
Leaks - HYDRAULICSNo
Angle CylinderGood - Both dry
Control Linkage - HYDRAULICSGood - Right tee handle controls
Hose LinesGood
Lift CylindersGood - Both dry
Overall Operating ConditionGood
Tilt CylinderGood
BLADE
Cutting Edge & BitsGood - Shows some wear has a flip left
Face / MoldboardGood
PinsGood
TowerGood
TrunnionsGood - Tight has cap shims to remove to adjust when needed
UNDERCARRIAGE
Pins & Bushings Turned?No
Average Life Remaining - UNDERCARRIAGE - 85%
Notes - UNDERCARRIAGE 1 - 39-link
Track Frame - LeftGood
Track Frame - RightGood
Carrier Rollers Front
Idlers Front
Links
Pins & Bushings (External)
Track Roller 5
FINAL DRIVES
Housings, LeftGood
Housings, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Runs and operates like new
comment 2 - Straight tight machine
comment 3 - Low hour


Specs from the manufacturer:

Dimensions
Ground Clearance1 ft (0 m)
Height - Top of Cab9 ft (3 m)
Length of Track on Ground10 ft (3 m)
Length w/ Blade13 ft (4 m)
Length w/o Blade10 ft (3 m)
Width Over Tracks6.1 ft in (15 cm)
Engine
Bore4 in (9 cm)
Displacement305 cu in (0 m)
Engine ModelCat 3046T
Gross Power77 hp (57 kw)
Net Power70 hp (52 kw)
Power Measured @2,200 rpm
Stroke5 in (12 cm)
Hydraulic System
Pump Flow Capacity2,900 gal/min (10,977 l/min)
Relief Valve Pressure9 psi
Operating Specifications
Cooling System Fluid Capacity6 gal (21 l)
Engine Oil Capacity3 gal (13 l)
Final Drives Fluid Capacity4 gal (14 l)
Fuel Capacity44 gal (165 l)
Hydraulic Fluid Capacity12 gal (45 l)
Operating Weight16,227 lbs (7,361 kg)
Ripper
Ripper TypeParallelogram
Service Refill Capacities
Cooling System6 gal (21 l)
Fuel Tank44 gal (165 l)
Standard Blade
Blade Angle (both directions)25 °
Capacity2 cu yds (1 m)
Height37 in (94 cm)
Width8 ft (2 m)
Standards
FOPSSAE J231-JAN81, ISO 3449-92
ROPSSAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95
Transmission
Max Speed - Forward6 mph (9 kph)
Max Speed - Reverse6 mph (10 kph)
Number of Forward Gears1
Number of Reverse Gears1
Transmission Typedual path, closed loop hydrostatic
Undercarriage
Ground Contact Area2,586 cu in (0 m)
Ground Pressure6 psi
Number of Shoes per Side39
Number of Track Rollers per Side6
Standard Shoe Size16 in (41 cm)
Track Gauge5 ft (1 m)
Winch
Drum Diameter10 in (25 cm)
Drum Width11 in (27 cm)
Weight1,345 lbs (610 kg)

Dealer Contact Info:

Michigan Cat




Contact: Used Equipment

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo