| GENERAL APPEARANCE |
| S.O.S. Taken | No |
| Cab or Canopy | Good |
| Draw Bar | Good |
| Fuel Tank | Good |
| Hood | Good |
| Paint | Poor - Faded, paint chips and surface rust over machine |
| Pre-Cleaner Bowl | Fair - Bowl cloudy |
| Sheet Metal | Poor - Left rear side dented and bent at compartment doors |
| Steps / Ladder | Good |
| SAFETY ITEMS |
| Back Up Alarm | Poor - Not working |
| Horn | Good |
| GAUGES, OPERATOR STATION, CONSOLE |
| Dash Console | Good |
| EMS Panel / Warnings | Good - EMS warning lights working |
| Gauges | Good - Both gauges working, |
| Seat Cushion / Arm Rest | Poor - Seat cushion covering weathered, torn |
| Switches | Good |
| ENGINE |
| Blow By | Yes - Moderate |
| Compression in Radiator | No |
| Fluid Levels OK? | Yes |
| Knocking | No |
| Oil Leaks | Yes - Leak at valve cover and under injection pump |
| Water in Oil | No |
| Notes - ENGINE | - Powered by caterpillar 3204, 4-cylinder turbo diesel |
| Oil Pressure (H/L/N) | - Warning light goes out when started |
| Engine Supports | Good |
| Fuel Injection System | Fair - Has fuel supply problem sluggish, dies under load, found ran machine out of fuel, customer said |
| Operating Condition - ENGINE | Fair - Engine is sluggish, not getting to full rpms, wants to die under load, seems like a fuel supply problem, checked fuel level found fuel level very low, |
| Turbocharger / Blower | Good |
| COOLING SYSTEM |
| Belts / Pulleys - COOLING SYSTEM | Fair - Belts show wear |
| Fan | Good |
| Hoses | Good |
| Radiator | Good |
| ELECTRICAL, STARTING AND CHARGING SYSTEM |
| Block Heater | No |
| Ether Aid | No |
| Batteries / Cables | Good |
| Starter | Good |
| Wiring | Good |
| TRANSMISSION |
| Transmission - Noisy | No |
| Case | Good |
| Controls - TRANSMISSION | Fair - Has play in shift control |
| Cooler | Good |
| Operating Condition - TRANSMISSION | Good - Operated in all 3-speeds |
| Pump - TRANSMISSION | Good |
| Seals | Good |
| Temp / Pressure Gauges | Good - Powertrain temperature gauge working |
| Transmission - Forward Shifts | Good |
| Transmission - Reverse Shifts | Good |
| STEERING |
| Steering Clutch | Good |
| Steering Linkage | Good |
| Steering Operating Condition | Good - Steers good , tracks straight |
| BRAKE |
| Notes - BRAKE | - Service and parking brake working good |
| HYDRAULICS |
| Angle Cylinder | Good - Both dry |
| Control Linkage - HYDRAULICS | Poor - Has play in tee handle controls |
| Hose Lines | Good |
| Lift Cylinders | Fair - Both seeping, leaking from packing |
| Overall Operating Condition | Good - Hydraulic functions operate good |
| Tilt Cylinder | Good |
| BLADE |
| Notes - BLADE | - 8’10ft wide 6-way blade |
| Cutting Edge & Bits | Good - Good condition and has a flip left |
| Face / Moldboard | Fair - Lower face show wear and denting, has been plated |
| Pins | Fair - Lift tilt and angle cylinder mounting pins and bushings shows aprox 1/4 in play |
| Trunnions | Good |
| UNDERCARRIAGE |
| Pins & Bushings Turned? | No |
| Average Life Remaining - UNDERCARRIAGE | - 60% |
| Equalizer Bar | - Outer Equalizer bar mounting bushings show some wear |
| Track Frame - Left | Good |
| Track Frame - Right | Good |
| Carrier Rollers Front | |
| Idlers Front | |
| Idlers Rear | |
| Links | |
| Pins & Bushings (External) | |
| Track Roller 8 | |
| FINAL DRIVES |
| Housings, Left | Good |
| Housings, Right | Good |
| COMMENTS, MISC. REPAIRS, GENERAL REMARKS |
| comment 1 | - machine ran out of fuel at end of inspection. runs good per customer. |
Equipment
Search
News
Auctions
