1983 Caterpillar D6D For Sale in Aurora, CO



For Sale: $39,000.00 USD


Wagner Equipment Co.

https://www.wagnerequipment.com


Contact: Equipment Manager

Click for Phone Number

Machine Info:

Hours:3915
Serial Number:4X08960
Stock Number:479210
Machine Location:AURORA CO, 80011

Description:

CONSIGNMENT / MORA,ECOLD START, ETHER AID / EROPSHYDRAULICS, STANDARD @44 GPM* NO RIPPER * / ALARM, TRAVEL3915/07/07/20ENGINE,3306, 139.5HP, 6CYL1983 CATERPILLAR D6D DOZERSEAT, STANDARD VINYL W/ 2" BELT*METER REPLACED @3915 HRSUC,NON-CAT 24" SHOES ( WORN)AIR CONDITIONER / HEATER NON-OPLIGHTING,HALOGEN WORK (4)FRT/RRAS IS / AS RECEIVEDTRANSMISSION, POWER SHIFT 3F-3RHAND & FOOT CONTROLS W/LEVERDRAWBAR / SWEEPS & SCREENSTEER, LEVER W/TILTBLADE,SEMI U, 4.3YD3, 10.5'WIDE

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredNo
Cab or CanopyFair - Top rust, doors weather stripping missing
DecalsPoor - Missing
Draw BarFair
FendersFair
Fuel TankFair - Dented
Grab IronsFair - Bent
HoodFair - Dented
Main Frame WeldsGood
PaintFair
Pre-Cleaner BowlFair
Sheet MetalFair - Cab rear lower plate guard bent
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmPoor
HornPoor
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Air ConditionerPoor - All not operational, condenser fans guards bent, debris
Dash ConsoleGood
GaugesGood
Glass/MirrorsGood
HeaterPoor
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersPoor - Missing
ENGINE
Blow ByYes
Compression in RadiatorNo
Fluid Levels OK?Yes
KnockingNo
Oil LeaksYes - Governor minor seep
Water in OilNo
Oil Pressure (H/L/N) - Normal
Air CleanersFair
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEFair
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
HosesFair
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Ether AidYes
AlternatorGood
Batteries / CablesGood
StarterGood
WiringFair
TRANSMISSION
Leaks - TRANSMISSIONYes - Hard to see
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONFair - Shift gate worn
CoolerGood
Lines / Fittings - TRANSMISSIONFair
Operating Condition - TRANSMISSIONGood
Pump - TRANSMISSIONGood
SealsFair - Leak under belly pan
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Steering ClutchFair - Rs. Steering have to pull lever all the way to turn
Steering LinkageFair - Rs. Steering have to pull lever all the way to turn
Steering Operating ConditionFair - Rs. Steering have to pull lever all the way to turn
HYDRAULICS
Leaks - HYDRAULICSYes
Notes - HYDRAULICS - Ls. Oil leak under cab, rear underside leak
Control Linkage - HYDRAULICSFair - Worn
Hose LinesFair - Blade hose guard bent
Lift CylindersFair - Ls. Minor oil seep
Overall Operating ConditionFair
Tilt CylinderFair - Leaks, Mountings are worn, pin welded in place
BLADE
Cutting Edge & BitsFair
Face / MoldboardFair - Worn at ends, cracked, face worn, dented, top guard bent
PinsFair - Worn
Push ArmFair - Hard surface welding
Tilt ArmsPoor - Worn, pin welded
TrunnionsFair - Worn
UNDERCARRIAGE
Carrier Rollers - Fair
Equalizer Bar - Fair
Notes - UNDERCARRIAGE - Berco links, trex sprockets, dcf carrier rollers
Pins & Bushings (External) - Fair
Segments - Fair
Pins & Bushings Turned?No
Track Frame - LeftFair - Guards damaged, bolts missing, idler guard worn, idler mountings worn
Track Frame - RightFair - Guards damaged, bolts missing, idler mountings worn
FINAL DRIVES
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Rs. Steering have to pull lever all the way back to turn
comment 2 - Non cat undercarriage
comment 3 - No ripper
comment 4 - Machine starts and is operational
comment 5 - Consignment machine


Specs from the manufacturer:

Dimensions
Ground Clearance1 ft (0 m)
Height - Top of Cab10 ft (3 m)
Length of Track on Ground6 ft (2 m)
Length w/o Blade11 ft (3 m)
Width Over Tracks6.5 ft in (17 cm)
Engine
Aspirationturbocharged
Displacement641 cu in (0 m)
Engine Model3,306
Gross Power140 hp (104 kw)
Hydraulic System
Pump Flow Capacity44 gal/min (166 l/min)
Relief Valve Pressure2,250 psi
Operating Specifications
Fuel Capacity63 gal (238 l)
Hydraulic Fluid Capacity12 gal (46 l)
Operating Weight20,360 lbs (9,235 kg)
Standard Blade
Blade Angle (both directions)12 °
Capacity4 cu yds (3 m)
Height45 in (113 cm)
Width11 ft (3 m)
Transmission
Max Speed - Forward7 mph (11 kph)
Max Speed - Reverse8 mph (13 kph)
Number of Forward Gears3
Number of Reverse Gears3
Transmission Typepowershift
Undercarriage
Ground Contact Area2,294 cu in (0 m)
Ground Pressure10 psi
Number of Track Rollers per Side5
Standard Shoe Size16 in (41 cm)
Track Gauge5 ft (2 m)

Dealer Contact Info:

Wagner Equipment Co.




Contact: Equipment Manager

Click for Phone Number