2008 Caterpillar D6NLGP For Sale in Elmhurst, IL



For Sale: $66,500.00 USD


Altorfer Holdings

https://www.Altorfer.com


Contact: Patten Used Sales

Click for Phone Number

Machine Info:

Hours:13749
Serial Number:DJY01364
Stock Number:UE5578
Machine Location:ELMHURST, IL 60126

Description:

ACCUGRADE READYAIR CONDITIONERAIR SUSPENSION SEATAM FM RADIOAUXILIARY HYDRAULICSBLADE, PATBLADE, SDIFF STEERDRAWBARENGINE ENCLOSURESEPA LABELEROPSLGPLIGHTINGPILOT CONTROL

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
Cab or CanopyGood
DecalsGood - Minor fading.
Draw BarGood - Pull pin installed.
FendersGood - No damage.
Fuel TankGood
Grab IronsGood
HoodFair - Straight, no damage, some looseness in mounts.
PaintGood - Good coverage, minor fading.
Sheet MetalGood
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes
Air ConditionerGood
Dash ConsoleGood - No damage.
EMS Panel / WarningsGood - Warning lights and alarm working correctly.
GaugesGood - All working.
Glass/MirrorsGood
HeaterGood - All fan speeds working correctly.
Interior LightsGood
Seat Cushion / Arm RestGood - Cloth seat, one minor hole in lower cushion.
SwitchesGood
Windshield WipersGood - All working.
ENGINE
Blow ByYes - Excessive blow by, started hard cold and smokes. Bad rings.
Fluid Levels OK?Yes
KnockingNo
Oil Pressure (H/L/N) - Normal, 50 psi.
Air CleanersGood
Fuel Injection SystemGood - No leaks, new high psi fuel lines installed recently.
Operating Condition - ENGINEFair - Engine starts hard and runs rough until warmed up. Has excessive blow by and white smoke from exhaust. Will need engine replaced soon.
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Standard RadiatorYes
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
HosesGood
RadiatorGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
Ether AidYes
AlternatorGood - Charging correctly, 28 volts.
Batteries / CablesGood
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
Controls - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
SealsGood - No evidence of leaks.
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Differential Steering ControlsGood
Steering LinkageGood
Steering Operating ConditionGood
BRAKE
Holding What Gear? - 2.0
HYDRAULICS
Angle CylinderGood - Both are dry.
Control Linkage - HYDRAULICSFair - Some looseness, useable.
Hose LinesFair - Minor leak at RH angle cylinder lines/fitting.
Lift CylindersFair - RH cylinder minor seeping, dust seal torn.
Overall Operating ConditionGood
Tilt CylinderGood - Dry.
BLADE
Cutting Edge & BitsGood - 20% remaining, not flipped.
Face / MoldboardFair - Minor denting.
KnuckleFair - Minor looseness, useable.
PinsFair - Some looseness in lift and tilt cylinder pins, useable.
Spill RackGood
UNDERCARRIAGE
Pins & Bushings Turned?No
Carrier Rollers - GC, minor wear.
Equalizer Bar - Fair, pins/bearings are OK...pin bores in roller frames are worn, minor movement.
Notes - UNDERCARRIAGE 1 - Recent aftermarket U/C.
Pivot Shaft - LH roller frame/pivot shaft bore has been welded/repaired.
Segments - GC.
Track Frame - LeftFair - LH frame has been patched/repaired at pivot shaft bore. Some oil around repairs...not sure if residual oil from repair or leaking.
Track Frame - RightGood
Carrier Rollers Front
Idlers Front
Idlers Rear
Links
Pins & Bushings (External)
Pins & Bushings (Internal)
Segments
Track Roller 1
Track Roller 2
Track Roller 3
Track Roller 4
Track Roller 5
Track Roller 6
Track Roller 7
Track Roller 8
FINAL DRIVES
Housings, LeftGood - No damage/leaks.
Housings, RightGood - No damage/leaks.
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Needs and engine, excessive blow-by. LH roller frame has been heated/welded/patched...not sure how long repair will last.
comment 2 - Recent aftermarket U/C.


Specs from the manufacturer:

Dimensions
Ground Clearance2 ft (1 m)
Height - Top of Cab10 ft (3 m)
Length of Track on Ground10 ft (3 m)
Length w/o Blade12 ft (4 m)
Width Over Tracks8.2 ft in (21 cm)
Engine
Displacement403 cu in (0 m)
Engine ModelC6.6 ACERT
MakeCat
ModelC6.6 ACERT
Net Power150 hp (112 kw)
Number of Cylinders6
Power Measured @2,000 rpm
Operating Specifications
Alternator Supplied Amperage95 A
Cooling System Fluid Capacity9 gal (35 l)
Final Drives Fluid Capacity2 gal (7 l)
Fuel Capacity79 gal (299 l)
Hydraulic Fluid Capacity8 gal (30 l)
Operating Voltage24 V V
Operating Weight39,222 lbs (17,791 kg)
Standard Blade
Capacity4 cu yds (3 m)
Width13 ft (4 m)
Transmission
Max Speed - Forward6 mph (10 kph)
Max Speed - Reverse7 mph (12 kph)
Number of Forward Gears5
Number of Reverse Gears5
Transmission TypeHydrostatic
Undercarriage
Ground Contact Area8,122 cu in (0 m)
Ground Pressure5 psi
Number of Shoes per Side46
Number of Track Rollers per Side8
Standard Shoe Size33 in (84 cm)
Track Gauge7 ft (2 m)

Dealer Contact Info:

Altorfer Holdings

Fax: 630-279-7892



Contact: Patten Used Sales

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo