List and Sell Your Equipment  /  Dealer Login  /  Create Account
This machine has been sold.

2015 Caterpillar D6N XL W



MACHINE SOLD



Machine Info:

Hours:4381
Serial Number:PER01078
Stock Number:UT18819
Machine Location:HARRISBURG, PA 17111

Description:

WINCH READY PACKAGEHEAVY DUTY GUARDSTANDARD AIR CLEANEREROPSLANE 3 ORDERCOLD WEATHER PACKAGEDRAWBARSTANDARD FUEL TANKCAT D6N XL W TRACK TYPE TRACTORPRICE REFLECTS BASE MACHINE ONLYATTACHMENTS SOLD SEPARATELYSTANDARD RADIATORAIR CONDITIONING

Machine Details:

GENERAL APPEARANCE
Cleaning RequiredYes
S.O.S. TakenYes
Cab or CanopyFair - Cab has small dent on left hand side by the door.
DecalsPoor - Has non-Cat stickers on side of machine and in cab
Draw BarFair - Missing tow pin
FendersGood
Fuel TankFair - Needs fuel tank breather
Grab IronsFair - Rear grab bar bent.
HoodGood
Main Frame WeldsGood
PaintFair - Normal wear, scratches, and rust on machine.
Sheet MetalGood
Steps / LadderGood
SAFETY ITEMS
ROPSYes
ROPS Certification PlateYes
Back Up AlarmGood
HornGood
Parking Brake - SAFETY ITEMSGood
GAUGES, OPERATOR STATION, CONSOLE
Current O&MMYes
Current Parts ManualYes
Current Safety ManualYes
Notes - GAUGES, OPERATOR STATION, CONSOLE - All of the manuals are in poor condition.
Air ConditionerGood
Dash ConsoleGood
EMS Panel / WarningsGood
GaugesGood
Glass/MirrorsGood
HeaterGood
Interior LightsGood
Seat Cushion / Arm RestGood
SwitchesGood
Windshield WipersGood
ENGINE
Blow ByNo
Compression in RadiatorYes
Fluid Levels OK?Yes
KnockingNo
Oil LeaksNo
Water in OilNo
Engine SupportsGood
Fuel Injection SystemGood
Operating Condition - ENGINEGood
Turbocharger / BlowerGood
COOLING SYSTEM
Leaks - COOLING SYSTEMNo
Belts / Pulleys - COOLING SYSTEMGood
CoolersGood
FanGood
HosesGood
RadiatorGood
Water PumpGood
ELECTRICAL, STARTING AND CHARGING SYSTEM
AlternatorGood
Batteries / CablesGood
StarterGood
WiringGood
TRANSMISSION
Leaks - TRANSMISSIONNo
Transmission - NoisyNo
CaseGood
Controls - TRANSMISSIONGood
CoolerGood
Lines / Fittings - TRANSMISSIONGood
Operating Condition - TRANSMISSIONGood
Pump - TRANSMISSIONGood
SealsGood
Temp / Pressure GaugesGood
Transmission - Forward ShiftsGood
Transmission - Reverse ShiftsGood
STEERING
Differential SteerGood
Differential Steering ControlsGood
Steering ClutchGood
Steering LinkageGood
Steering Operating ConditionGood
HYDRAULICS
Leaks - HYDRAULICSNo
Angle CylinderGood
Control Linkage - HYDRAULICSGood
Hose LinesGood
Lift CylindersGood
Overall Operating ConditionGood
Tilt CylinderGood
BLADE
Cutting Edge & BitsFair - Looks like they have been flipped at least once.
Face / MoldboardGood
PinsGood
Tilt ArmsGood
TrunnionsGood
UNDERCARRIAGE
Notes - UNDERCARRIAGE - Rock guards full length of track rollers.
Notes - UNDERCARRIAGE 1 - Link #106-1625
Track Frame - LeftGood
Track Frame - RightGood
Carrier Rollers Front
Idlers Front
Idlers Rear
Links
Pins & Bushings (Internal)
Segments
FINAL DRIVES
Housings, LeftGood
Housings, RightGood
Planetaries / Differential, LeftGood
Planetaries / Differential, RightGood
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
comment 1 - Machine is due for 2000 hour service. Parts and labor quoted in “parts”


Specs from the manufacturer:

Dimensions
Ground Clearance1 ft (0 m)
Height - Top of Cab10 ft (3 m)
Length of Track on Ground8 ft (3 m)
Width Over Tracks8.2 ft in (21 cm)
Engine
Bore4 in (10 cm)
Displacement433 cu in (0 m)
Engine ModelCat C7.1 ACERT
Flywheel Power166 hp (124 kw)
Net Power145 hp (108 kw)
Stroke5 in (13 cm)
Hydraulic Controls - Pump
Ripper Cylinder Flow34 gal/min (127 l/min)
Tilt Cylinder Flow24 gal/min (90 l/min)
Operating Specifications
Cooling System Fluid Capacity11 gal (41 l)
Final Drives Fluid Capacity2 gal (7 l)
Fuel Capacity79 gal (299 l)
Hydraulic Fluid Capacity8 gal (30 l)
Operating Weight34,361 lbs (15,586 kg)
Ripper
Beam Cross Section216 mm 254 mm (8.5 in 10.0 in)
Number of Pockets3
Overall Beam Width87 in (220 cm)
Ripper TypeFixed Parallelogram
Service Refill Capacities
Cooling System11 gal (40 l)
DEF Tank5 gal (19 l)
Engine Crankcase5 gal (17 l)
Final Drive - Each2 gal (7 l)
Fuel Tank73 gal (277 l)
Hydraulic Tank8 gal (30 l)
Power Train42 gal (160 l)
Standard Blade
Capacity4 cu yds (3 m)
Height47 in (120 cm)
Width11 ft (3 m)
Standards
BrakesBrakes meet the standard ISO 10265:2008.
FOPSFOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
ROPSROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Transmission
1 Forward2 mph (3 kph)
1 Reverse3 mph (4 kph)
2 Forward4 mph (6 kph)
2 Reverse4 mph (7 kph)
3 Forward6 mph (10 kph)
3 Reverse8 mph (12 kph)
Max Speed - Forward6 mph (10 kph)
Max Speed - Reverse7 mph (12 kph)
Number of Forward Gears3
Number of Reverse Gears3
Undercarriage
Ground Contact Area4,822 cu in (0 m)
Ground Pressure7 psi
Number of Shoes per Side40
Number of Track Rollers per Side7
Track Gauge6 ft (2 m)
Winch
Drum Capacity - 22 mm (0.88 in)288.8 ft in (734 cm)
Drum Diameter10 in (25 cm)
Drum Width12 in (32 cm)
Flange Diameter20 in (50 cm)
Oil Capacity20 gal (74 l)
Weight2,814 lbs (1,276 kg)
Winch and Bracket Length45 in (115 cm)
Winch Case - Width38 in (98 cm)

Dealer Contact Info:

Cleveland Brothers

Fax: 717-564-6931



Contact: Erin Westbrook

Click for Phone Number







ceg-logo ceg-logo ceg-logo ceg-logo ceg-logo